I have just replaced the ABS Module, and replaced the brake fluid in my 1998 VW Passat 1.8T GLI. Now my brakes don't work at all, when I press the brake It goes all the way down. All the pipes are connected correctly and everything was put back the way it was, so I don't get why the brakes aren't working at all. Passat 1998 1.8T GLI...
View 1 RepliesIs there anyway to disable this annoying "press brake pedal to start" on the 2010 with Vag Com or some other magic tricks? I searched and found a thread but no solution if there is any.
View 8 RepliesI noticed that the car take a very long time to come to a complete stop and I have to press the pedal hard to stop. The brakes have approximately 11,000 miles on them in city driving conditions. Also the slightest bit I relax my foot, the car begins to creek and move. I have to have a very firm foot on it so it won't move. Is it time for new brakes or should I first begin to look at other potential problems? Also I noticed the car pulls to right slightly could that be related?
View 14 RepliesI have a 2009 Camry and both brake lights don't illuminate when I press the brake pedal but during night time driving, the red tailights are on indicating the bulbs aren't burnt. The third brake light on the top behind the rear seats does illuminate. By the way my tailights aren't the fancy LED ones just the normal stock bulbs. So what's the problem here? Is it a electrical issue?
View 2 RepliesI am looking to buy a 2012 Prius and I test drove it. Everything seems ok except each time I press the brake pedal there is a swoosh noise its as if air is being released from somewhere and I can easily hear it. Is this normal? the car is 95000 km on it. The dealer says it might be a normal hybrid noise. I currently have a 2007 Prius but that does not make this noise.
View 5 RepliesI have 2010 Tig, for the last 2 days, the TPMS on the MFD will stay displayed until I press down on the brake pedal, then it goes out, is this the sign on some problem?
View 5 RepliesMy brake pedal is rock hard to press and when I do press it while pushing the push to start, it does not turn on.
View 8 RepliesI can press on the brake pedal when car is off or on and there is a kind of quirky sound made. I can hear a pump sound and then a squeaking or quirky sound. It happens every time I press the pedal when it is stopped, either on or off.
View 2 RepliesThe truck in my sig. makes a clicking noise when it's in the park and I press the brake pedal down. The click is coming from somewhere up high in the steering column. It doesn't make the clicking noise in any other gear only in park. Might be normal but I don't remember hearing it before?
View 9 RepliesI've a UK 2004 gen ii with 69000 miles on the clock. When coming to a stop and also when at a stand still if I press down the brake pedal I get a rather loud creaking sort of noise. I guess that's friction brake related as no noise with using brakes when driving. Also a high pitch squeal when driving and turning steering wheel slightly to the left that stops when you press the brake pedal.
View 19 RepliesI have a 2002 Hyundai Santa Fe with 152,000 miles on it. Last night, when I got in my car after work, I noticed that the brake pedal is now making an audible click when I press down on it. This has never occurred before (including on my way to work yesterday), but is still doing it today.
No lights are present on the dashboard, and I have not noticed any difference in the performance of my brakes. What could cause this, and should I be concerned?
I have 2011 SE, it won't start at all. The car won't start all thou all electrical are working (radio, NAV, Dashboard) but when trying to press the break pedal is hard as a rock. Dashboard computer at times tells me to press the break pedal - but it wont start, it actually turns off when i press the break and hit the start button. It happen twice before was able to start it within couple minutes.
View 24 RepliesMy truck is experiencing a hard to press brake pedal. It comes and goes and does not seem to happen at any one time while driving. I know that my truck uses a vacuum pump and instantly replaced this as I figured that with the age of the truck it should be done. However even with a new vacuum pump it did nothing to correct my problem with a hard to press brake pedal. I inspected all the lines to ensure that they are holding pressure and replaced two of the three with new lines. Again it still did nothing to correct the issue. I do not have any leakage coming from the master cylinder and no hiding noise from the brake booster.
1996 F250 7.3l Diesel Turbo 270,000 miles Manual Transmission
I'm having Hyundai Accent GLS Model 2005. Since yesterday, My tail lamp and Third Brake light is still switched on even I turn off the light & I notice that my Auto door lock is not functioning even I press the Brake Pedal. I tried to disconnect the battery & the Fuse and place it back but it doesn't works. Currently, I just pull out the fuse.
View 6 RepliesI have a Toyota Corolla 2010 LE. When I'm driving, no matter how fast I drive, I feel a vibration sound. When I press brake pedal, it's worse than driving. I recently replaced front rotors and brake pads. I also replaced whole tires a month ago.
View 9 RepliesIs it all the lexus rx350 had that noise? From the day I noticed hissing noise when I gentally press the brake pedal down and release it . And same noise can be heard when drive slowly and release gas pedal.
View 10 RepliesI have a 2010 Prius Hybrid and lately, on an intermittent basis, I will press the brake pedal and push the start button and the dashboard lights up as normal but when I go to put it in gear nothing happens. The last time it happened the fan was running and I couldn't turn it off. It's like the car is all set to go but all the interior controls don't function. I then shut it off and restart it and everything works.
View 1 RepliesI have a 2007 Toyota Prius. When I press the brake pedal and press the start button the engine does not start or the wheels are not powered by the battery. It gives me the following errors:
The indicator in the Start button lights in Amber Color.
0 kmph mark is not activated in the dash board pannel.
When I shift the gears it only shifts to neutral ("N") gear.
I cant move the car forward or backward. An error message is displayed in the MFD in Japanese language. It is in Japanese and I cant read the error message.
I own a 2015 camry SE - 4k miles on it. Right from the second month I felt like the brake was stiffer and I always felt like I am going to rear end the vehicle in the front. Last one month it became really worst. The pedal feels lot stiff and I have to press hard to bring to a complete stop. Brake is not very responsive. I feel like its still rolling even after applying the brakes and I have to apply the brake very hard to come to a stop. It looks to me like there is a response delay between applying brake pedal and actual stop. I used to drive a Civic and this is my first Toyota so I am not sure whether this issue is common in camry.
View 6 RepliesI know that VW's are known for funky problems. Sometimes when it has recently rained heavily, the brakes will make a crunching sound when I press the pedal down, and there is also increased pressure, as if there is water stuck somewhere. It will drive fine for a few minutes and then will start shuddering, spewing exhaust, and nearly stalling. The engine light will often flash, and for this reason I brought it into my mechanic who is a VW specialist. It was first diagnosed as a faulty engine coil, and that was replaced. The problem came back repeatedly and he said I would have to wait until it "got worse" for him to figure it out. I've been riding it out since then, and once I get to my destination and the car sits for a little bit (usually 4+ hours), it runs fine again. The rainy season has started so I'm a little worried about this happening on a regular basis. This has never happened in dry weather.
View 12 RepliesI recently installed an aftermarket rear spoiler with third light. While searching and testing for a hot brake wire to hook up to, I somehow accidentally shorted out the brake lights. They will not come on when i step on the brake pedal.
I checked the corresponding fuse and it is still intact. The brake light symbol on the dash is "on" so I know the "brake light out" sensor is still working....is there something im missing in getting the brake lights to work again ?