New to posting to the forum but this is the first major problem I have had with my passat. It's a 97 vr6 and i have a major coolant leak above the oil pan somewhere it has already gone thru about a gallon of coolant today alone. I noticed it yesterday but it was small and i couldn't tell where it was coming from.
View 2 RepliesMy buddy has a 2000 GLX that's been a great car, but he had an overheat situation where the car lost most all of the coolant almost instantaneously. I went over to his house to check it out, but was limited on time so I couldn't get the belly pan off and the car jacked up to thoroughly diagnose it. We filled it with distilled water and ran it so I could see where it was leaking. Seems to be gushing mostly from the back side of the engine (by the firewall) on the passenger side, but there also seems to be some leaking in the front as well.
What are the major failure points that could cause it to dump it as quickly as it's filled? Does the car have a distribution pipe like a VR that can be a major failure point? My experience is limited with the V6 engine.
I've got a 1997 Dogde Ram 1500 Pickup. It's got a major coolant leak that seems to be coming right from the middle of the front of the engine. I can't see where it's coming from. I changed the thermostat and the water pump, but it seems to be even behind that. There is a rubber hose that comes off the water pump and disappears between the two banks. I can only see a tiny end of it, where it goes. It looks like getting to that would involve taking off the whole intake manifold. If that's the case, I might as well total the truck. I dunno...
View 12 RepliesGot a CEL yesterday and it came as an EVAP - major leak... cleared the code, ran the car - HARD....nothing came back up - car runs like a champ....
View 2 RepliesMy friend and I are working on her '03 1.8t and I noticed a huge oil leak under the intake manifold. It looks like there's a tube that has broken off and is now just spewing oil all over the place. I tried to get pics the best I could, so here they are....
I'd imagine its something that needs to be fixed asap.
My loaner 2014, 2.5 developed a massive fuel leak when trying to start it yesterday, and it did not start.
I had just done a short 1-mile trip and parked for 2 hrs, came out to start it and it turned over fine with no start, tried it again and smelled raw gas. Thought it flooded so I let it sit for 5 min and tried again, same result. Popped the hood and saw fuel on passenger side frame area and it was dripping a lot when I looked under it.
The car had 5400 miles on it and I had just put 1000 of those on over the week and the car was flawless. Dealer towed it and I am in another loaner while they finish my TDI. I could not see the cause and I wasn't going to trouble shoot as it was a loaner. The 2.5 has been bullet proof overall and this seemed more like a fuel line popped and not an engine issue.
Just wanted to throw an FYI out in case you get a no start and smell gas from an otherwise flawless engine. Nothing dramatic happened in this case as the engine was cold, but if happened while driving it had great potential for fire. Also, would hate to have this happen in my garage in the morning.
If I can get more details from the dealer I will post an update. This would clearly be a recall if they find defective design in failed part. I would not cry wolf on this yet, just a concern...again this car had been on the road for 5 months and 5400 miles.
Started noticing small drops of oil a few weeks ago under the RX. I checked the dipstick and oil level was well within range so I figured something just needed tightening. Went ahead and took it in for it's first oil change last Friday and told them about the leak. Turns out it's leaking from the timing chain cover and will rake 3 to 4 days to repair. Never had something this major on a 9 month old vehicle.
View 6 RepliesI have 2000 chevy impala with a 3800 series 2 engine with 170,000 miles on it. I have major oil leak which starts leaking when the car is running, i cannot see from the top and when i am underneath the car , I cannot see far enough up in the there to see where it is leaking, It is not coming from the seneding unit or the oil pan,,when the car is running it just pours out oil.
View 3 RepliesI have the 3.1 V6 in my 2001 Pontiac Grand Prix and today it started spewing oil out of what looks like an electrical plug in the front, toward the bottom just under the valve cover, dead center. What is this plug?
View 3 RepliesMy car has wet carpet, particularly in the passenger footwell and I have also noticed on the driver's side as well. My car did have a funky smell quite a few weeks ago, but after a couple of weeks of good strong sunlight and heat that smell went away. At the time I thought maybe some water had spilled and it just needed to dry up.
Yesterday we had a bucket full of rain. Quite heavy and strong. I didn't notice anything yesterday when I got to my car as it was still raining. However this morning I found that the smell was back (that wet carpet / mouldy smell) and I had a few minutes before the next train arrived. I checked quickly and found that the passenger side (in Australia it's the left side of the car facing forwards) carpet had a small wet patch.
Anyway got home after work and proceeded to find out what might be causing the problem. I dismantled part of the passenger side and lifted up the carpet and found that all underneath (the padding / noise proofing) was soaked wet.
I removed the plug that normally sits there and the amount of excess water from that plug to the garage floor was more than I was expecting
** Drain Plug **
I asked my wife to point a hose at the sunroof to see if I could spot where the water was coming from. I noticed that just underneath a big electrical bank sitting just above the carpet, water was basically running out of this hole.
** Close up of the hole where water is pretty much running straight through, basically someone turned a tap on and it just leaks straight into the carpet **
As you can see the closeness to the wiring is dangerously close.
I tried to see if the sunroof holes were blocked and they looked okay. I took some whipper snipper string and tried to feed it down the sunroof holes, but alas did not see where this would come out. I tried searching under the car, but couldn't find the spot where the water would normally drain out. The string went in and I fed it through, but eventually I hit a block somewhere but I don't know if this is a problem or just the string couldn't twist to get where it needed to.
I need to find out why there is water spilling into my cabin at the footwell. This has started to ruin my carpet and getting into the car with that smell surely isn't good for my or my family's health. Where this is meant to be draining out underneath the car? How do I fix this leak without spending a fortune?
I bought a 2003 F350 with the 6.0L. It had injection, EGR, and oil cooler issues. I tore into it, did the injectors, EGR delete, new oil cooler, turbo seal kit, and several other non related things. Put everything back together and when I started it, it was leaking oil at the paste of 1/2 qt and minute. I did all sorts of searching on this site and went back to work on it.
I re-installed all new gaskets and O-rings, replaced the ICP and IPR sensors. Started it back up, exact same thing. From what I can see, oil is accumulating on top of the oil cooler housing around the area the turbo oil supply connects. But, its not leaking from turbo supply, or from where the filter housing attaches. Im at a loss. Its definitely somewhere on top of the engine and running down the back, only when the engine runs.
I have an 06 with a 5.4 with 70k on it and I have already had to do the exhaust manifolds twice, once covered by warrantee at 19k, then again around 40k and now at 74k I have a major leak from the left side manifold again
View 1 RepliesMy 2003 f150 4x4 w/5.4 has 220k miles and only minor issues until a few days ago. I now have a coolant leak at the mating surface (both sides left and right) of the aluminum crossover coolant manifold (holds thermostat on one end). I have most of the bolts out to remove the crossover manifold but there is one bolt on the RH side that comes from the underside. All things equal, main question is... Can that crossover mainfold be removed independently from the intake? My thought is that in order to get to that last single bolt (there may be others I am not aware of yet) that I will need to remove the intake.
View 1 RepliesI have a 2001 F-150 5.4 engine. There is a coolant leak where the coolant leaves the head. Looks like a new gasket is in order. The part that needs to come off crosses over to the driver's side and the thermostat mounts into it. To remove this part and replace the gasket, it appears that most of the top of the engine, throtle body, fuel rails, intake, etc., will have to come off. One of the four bolts holding the part on is installed with the bolt head facing down. The only way I see to get this out is to take everything apart.
View 5 RepliesMy '02 F150 180k X-cab with the 5.4L is leaking coolant when it is shut off. Its just pouring right out.It looks like it's coming from top of the trans and around the firewall area. I had to replace a drain plug already.. the one behind starter ..its not leaking.
View 4 RepliesMy truck is leaking behind the engine. There is not any coolant on top of the engine. It's leaking above the transmission and running down the passage sides. Are there any hoses that could be leaking behind. Sometimes it leaks a lot other times it doesn't leak at all. The shop thinks it's a freeze plug but wouldn't it be leaking more if it was?
View 6 Replies1998 F150 4x4 4.2 ... Small leak spraying out of a steel pipe onto the front of the motor. This isn't my truck so I'm not very familiar with it but looks like there is a pipe that come from the water pump threw a bracket and y's and one end has a hose going to heater core n the other part is where the leak is I think it has a hose connected to it that goes to the intake. Only leaks when thermostat open. I'm going to take it apart tonight n see what I find. Iv looked for a replacement part and found nothing so I am going to try n replace the steel pipe with hose.
View 4 RepliesI have a 1998 Ford f150 4.6 2x4 i have a coolant leak on the upper intake. It comes out on the back left of the intake through a metal pipe. Well where the metal pipe is (pressed in) to the intake. Now i talk to the guy at ford dealership in the parts he said it is called the (heater pipe). He also told me that the part is 21 dollars but I have to press it in and if that does stop the leak he said I would have to buy a new intake. Now here is the problem I can not find any info regarding this heater pipe. I don't know how to remove it properly, why it is leaking. I can't find it in the handbooks that i have read so far.
View 14 RepliesOnly when running heat or defrost, coolant leak looks like it's coming out of the bell housing. I have a supercharger so very difficult to see behind motor, but with inspection camera, heater hose lines look dry. firewall looks dry. No coolant in cab. No steam on windows or smell. Pretty sure not casting/ freeze plugs because absolutely no leaking with heat off. Can run for days with no loss, then turn on heat and within minutes/ seconds coolant puddling in driveway. Is the hose that runs through valley pressurized only when heat is on? I saw a few older threads but as far as I could tell none specified heat on/ heat off conditions. Just started problem after doing some other work, hoses were off radiator and intercooler, replaced radiator. None of those connections are the culprit.
98 F150 Lariat 1900 TVS S/C Chiller Killer I/C 19PSI Snow performance WMI
I have an 01 supercab. 5.4 Triton 135k. I have begun to smell coolant the last couple of days. Have seen nothing leaking and truck doesn't run hot.
Will investigate more this weekend. Where to start looking for this. It has to be leaking somewhere. Windows don't fog and the smell is there all the time. I live in florida so don't use much heat.
Not the heater core. Heat works fine and no smell from the vents.
I think that it is coming from the hose that connects right to the reservoir. I have wiped it clean a few times and it always seems to be seeping from that area under the hose where it connects to the bung. I replaced the OE hose clamp with a new one and put some electrical tape around the hose but it still leaks. It does make a slight hissing sound from the area as well when I pop the hood after a long ride, but only lets off a few drips. My guess is that I may have to replace that entire hose but that looks involved as it is attached to several others.
View 4 Replies