Oldsmobile - Cutlass :: 1992 - Small Roar When Turn The Steering Wheel Slightly Left At All
Sep 26, 2011
I have a 1992 Olds Cutlass Ciera S. Just fixed it running with a tuneup, but now I noticed that when I turn the steering wheel slightly left at all, I get a sort of small roar and it may just be me but the car seems tense. It feels and sounds like a bad power steering pump, but it turns right fine, no noise or anything. I do not think it's a wheel bearing. Could this car have rack and pinion steering and that is going bad?
View 1 Replies
Advertisement
I've ignored it long enough and dont remember if it was like this when I bought it from the second owner...guess I had too much fun during the test drive. Any ways would it be an alignment issue up front or what?
View 8 Replies
i have 1992 v6 olds cutlass ciera. it likes to spit and sputter sometimes. no matter if it's hot or cold, up a hill or on flat, slow or stop?
View 3 Replies
I have a 1992 Oldsmobile Cutlass Ciera 6 cyl. This car just all of a sudden started shuttering and not wanting to take off. It will if I floor it but will still shutter a little?
View 10 Replies
Have a '92 Olds Cutlass Ciera 6 cyl 3300 engine. After 20-30 mins of driving it dies when I have to stop for a light. Depressing the brake kills the engine. Starts right up after but as soon as I put it in drive, it dies. If the car sits for 20 mins or so after problem begins it's okay. If I get to an intersection and have to stop, I put it in neutral. When I have to go again I rev the engine, let it die down some and then put it in drive (hard on the car, I know, but it's only way to get going again. Once I'm moving, I can accelerate and it's okay. What is wrong with my car?
View 3 Replies
I been working on this car for several weeks now. I have change,
1. The starter.
2. New Battery, New Plugs, New Crankshaft sensor.
I even change the belt tensioner because is was going bad (Broken). In fact I can hear the full pump running. After doing all this the car still not turn on. there is full in the full injector.
View 2 Replies
I have a new 2 week old Prius 4. So far I love it. I've put about 600 miles on it. This past weekend I spent a decent amount of time on the freeway and noticed an issue with my steering. I'm pretty sure it is an alignment issue.
The car tracks straight. When I let go of the wheel the car goes dead straight but...the steering wheel is a bit off center turn slightly to the left. If I hold the wheel and turn the steering wheel right to exactly straight the car will go right. It's like they they aligned the car with the steering wheel slightly off center.
View 10 Replies
Only had this car for about a month and 1200 trouble free miles. Really in great shape but with 276K miles on it. Really runs great and feels like a new car inside and out.
Yesterday, a cool morning, 38 deg.. Started at the Ready, backing out of my car port and cut the wheel partially to turn 90 deg. to enter the street. Came to full stop and shift lever is still in Rev, before I could shift to Drive. The steering wheel shutters like I was going over a rough. Jerking slightly from left to right about 2-3 degrees. Stopped within about a second and I still had normal steering response. I continued onto the street and made a ran a 300 mile round trip on freeway and surface streets without any further problems.
I know the power steering is electric assist over mechanical linkage and can only imagine that there was a power glitch in the power convertor and I was feeling pulses from the feed back in the power steering drive. No hydraulics to blame, I don't think.
View 14 Replies
I notice that when I jerk the steering wheel left and right fast (1-2 inches) I hear small knocking sound. Seems to have narrowed it down to the right side steering rack inside the booth.
View 4 Replies
My brakes were terrible and finally got roders and pads for front yesterday ... well the pad on passenger side was like not there anymore almost metal on metal and driver side was not close to being that bad but like driving down road there was a slight hi pitch tick that only occured when steering wheel was slightly tilted left (counter clockwise).
We redid front pads and roders (did bad not to long ago) and now there a terrible rubbing sound and it only occurs when again wheel tilted left or making a left hand turn cant figure it out thought it was the wire clip to hold caliper in place but that's clearing rim .... it sounds like metal on metal and driving me nut was driving last night and after awhile it did go away but i have feeling it going to happen again when i drive it today ...
View 3 Replies
I've always had a small creaking or groan when i turn the wheel after I lowered my GLI a year ago, but i feel like it's getting louder...
What could be causing it? cause im doing my year end "maintenance" (if its worn/almost broke, perfect excuse to buy upgrades) ...
My control arms are brand new with r32 bushings as are my 034strut mounts/bearings. I checked my steering fluid level and its good.
Pic for reference of current height, might raise it .5 or so, my new job has quite the driveway entrance.
View 3 Replies
I'm looking at a 2004 F250 XLT super cab 4x4 with a 5.4L with only 50k on the clock. It looks to be in great shape and drives good with only a few issues. Cruise doesn't work, it pulls to the left a little, and it has a slight roar coming from the left front wheel. Other than that it seems to be a nice truck. Its blue and grey two tone. Anything else I need to look at before pulling the handle on this one?
View 11 Replies
I have a '07 RX350. My steering wheel recently started having a squeaking noise when you turn it right, or left. This has nothing to do with the motor to extend or retract. You can hear the noise when you turn it ever so slightly back and forth (whether car is running, or not). I have seen other threads that talk about a grommet needing greese between the steering wheel and column, but not enough detail for me to determine what they mean. Also, if that's the case, I am not sure how you get to tha area?
View 4 Replies
I'm getting this weird sound when i turn on my car and turn the steering wheel left and right not even a full lock just left and right really quickly or slow there is this annoying clunking coming form both of the front wheels atleast thats what i think it is and it feels as something is loose but i checked most of the bolts.. Recently i changed my front wheel bearings inner cv and outer cv joints on both front wheels.. i changed my ball joints and tie rods everything was change within a 4-5months..
Also the other day as i was driving and i could only hear this 20mph and up this weird clunking and vibration in the floor.. no vibration in the steering wheel just the floor and clunking sound.. i know for a fact i need an alignment and possibly new tires.. but what would the clunking be coming form when driving or just parked in place while moving the steering wheel...
View 7 Replies
A while back as I was driving, I heard some sort of clunk, and the steering wheel locked and would not turn left. It then unlocked after a few seconds. Ever since then, it has been very hard to turn to the left (and right, at slow speeds and on sharp turns, but much easier than turning left). This happened a few days after I replaced both front end struts and inner tie rod ends, and got an alignment - they were cheap quick struts (entire assembly), but seem to be of fairly good quality.
Initially after some consultation I thought it was the power steering pump, so I replaced that. It became easier to turn right, but still very hard to turn left. I took the front end off the ground and turned the wheel all the way left and right, no problem or resistance. I am nearly certain it is not the pump.
At this point, I am fairly certain it is either the steering gear or some part of the rack and pinion. I am planning on getting the assembly replaced. The fastest and cheapest way is apparently to just buy the entire steering gear/r&p assembly. Would bad strut mounts ever cause an issue like this? Any other possibilities besides the steering linkage?
View 2 Replies
Having issues with Gen3 Prius steering column? I suddenly developed this clunking noise when I rock my steering wheel from left to right. It's steering correctly but I've never heard this noise before....
View 7 Replies
Lately my 2007 Camry (2.4 L, Auto) has developed a bit strange problem. When I'm driving on highway, even slight left turn results in a grinding noise and sort of resistant steering wheel. It happens only when I turn left. As soon as steering wheel gets back to straight, the noise and steering wheel resistance/hardness goes away. I don't really feel much when I'm driving slow on the city streets. Although some time when I am little bit fast, I feel slight grinding noise and steering hardness. No problem in turning right at all.
View 5 Replies
09 Camry steering wheel clicks when going over speed bumps or if turning the wheel left and right somewhat rapidly at a stop. Seems to not be as bad when the tilt is all the way down.
View 1 Replies
I've got a nasty groan and vibration on the steering wheel coming from my Steering Pump when I turn hard right or left. There seems like a little bit of oil around the pump and some traces of shiny metal (tiny sparkles) near the spline so I'm pretty sure the pump and pulley needs replacing.
View 1 Replies
My car is being so dangerous today. The steering wheel is squealing when I turn left or right and the gas pedal vibrates like hell. What's wrong with my car....
View 14 Replies
2007 camry le with 85k miles, there is a bad vibration in the front end, the steering wheel rocks, and when you turn right or left at slow speeds there is one knock, not a clicking, just one knock, also noticed the front driver side wheel has heavy wear on the outside corner of the tire, cv joint, bearings...
View 3 Replies
