I have a 2003 Montana which has the airbag light illuminated. Also no matter if the seat belt is locked in or not - no seat belt light ever comes on. I have a code scanner but it doesn't scan airbag codes.
View 4 RepliesI have a 2007 Toyota Camry LE, and the seat belt light keeps on flashing and the airbag light is solid. We have tried literally everything possible, tried replacing the seat, replaced the seats sensors, tried a airbag module out of another 07 camry with exact same part #. Toyota have diagnosed that all the systems for airbag is fine, except it has something to do with the seat belt of the drivers side/or module but all that's been checked and still no luck. My car is due for Safety inspecting coming month and need this to fixed. How to handle this. Btw light came on because we had a blown fuse for the drivers power seat, and my mechanic thought that it was the motor so we replaced the seat and noticed that it wasn't the motor. Was just the fuse and we put back the original seat and everything is functional except the lights came on. No accidents on it to the extent i know. and the wiring is all plugged back properly without anything like wiring damage.
View 9 RepliesI had posted about it earlier [URL] ... but now the car has been to the dealer and was told it was the passenger side seat belt buckle.
View 13 RepliesAirbag light came on the other day while out on an errand. Take it to work and pull the codes. I got a low voltage code and a driver seat belt buckle code "00059" maybe I'm trying to recall but unsure. I have a pair of seat belt buckles out of a mk5 Jetta. Do these will plug into my mk4 by chance?
View 2 RepliesI just bought a prius 2007.
I have a unique situation:
•No passenger: light is "Airbag" - No red flashing seat belt sign
•Passenger with seat belt: light is "Airbag" - No red flashing seat belt sign
•Passenger with no seat belt: light is "Airbag" - No red flashing seat belt sign
I have no other warning lights on the dash.
I tried to check to check if there are any loose wires/connectors under the passenger seat but everthing looks ok.
Is there a blown fuse?
About 6 weeks ago my 2004 4.6 scab had a glitch in that when you got going the seat belt warning chimes came on, to clear it stop at the next junction turn off re start and away you go. Now today its moved a step further on, the airbag not working light flashes and then stops on, but no seat belt chimes?
View 2 RepliesI have an 09 Accord (LX), one day the airbag light (SRS indicator) on the dash would stay on when driving, and the Seatbelt Reminder Indicator would detect the driver's seatbelt isn't engaged, even when it is.
A day later, the seatbelt indicator resumed normal operation, but the SRS light still remained on. I took it to two separate dealers and neither of them could connect to the SRS Control Unit to pull error codes from the onboard computer. They say I need to replace the SRS Control Unit to even begin troubleshooting this problem.
Can I replace my own SRS unit without accidentally triggering my airbags? Where do I order it? How do I make sure it is the correct part? Is it easy? Or I have a separate problem?
I noticed the passenger side on/off switch for the airbag doesn't illuminate anymore on my 98 Ranger. Whether I turn the key on the switch to on or off it doesn't illuminate either way. The airbag light on the dash flashes showing, counting a code 27 and then it stays on. I also noticed the seat belts on symbol doesn't illuminate and in the owner's manual it says it should illuminate and chime. I remember it use to illuminate but I don't remember a chime.
Someone with a 98 that has a seat belt reminder light that illuminates and chimes until you fasten the seat belt? I don't know if that and the airbag code is related. But I want to fix both? I guess the simplest one to tackle first would be the seat belt light/chime. I don't see a fuse for it. I guess I need to know first is it really suppose to chime.
'99 Montana van - EWB
I noticed the other day that when the key is turned to the proving circuit position, in addition to the warning lights on the dash illuminating, the air bag light comes on and flashes.
When the key is turned to start and released, the warning lights go out, and the air bag light flashes four of five times then goes out.
I've owned the van so long now that I'm beginning to see things that are there, but may have always been there and are quite normal.
Looking for access to all the airbag light OBD II codes for the 2006 Hyundai Azera? My airbag light is illuminated on the dash board and I would like to isolate the issue.
View 9 RepliesI just picked up my 2015 XSE yesterday and I am loving it so far. One thing I noticed is that even when I am driving by myself the yellow passenger airbag off light is always illuminated. Is this normal? I couldn't find anything in the settings. I would think it should flash a couple times then turn off.
View 10 RepliesWarning - rant/venting ahead.
Yesterday out of nowhere the red Airbag light on the dash illuminated when I started the car. This has never happened before. I tried turning the car off and on, but it just came back.
The light comes on normally, then goes out. It then comes right back on at the same time the "passenger airbag off" light illuminates.
I made a quick check of the connections under the passenger seat and none seemed loose. I'm planning on taking a closer look and disconnecting/reconnecting the terminals to see if anything is obviously wrong.
I'm pretty mad that my Sonata has another problem. It only has 80k miles. I've owned it just over one year and I've had the following problems:
-fuel overflowing. I haven't been able to sort this one out yet.
-OCV failure. I replaced it myself.
-Lots of ABS and brake warning lights. Dealer eventually told me I needed a new ABS pump for nearly $2000.
-Now this airbag problem.
I'm definitely very dissatisfied with the reliability of this car. If I had it to do over again, I definitely would have spent a little more to get another brand. This has been the most unreliable car I've owned in my 13 years of driving.
Quick question about the air bag light function for the passenger seat. When no one is sitting in the seat it does not display "on" or "off" by the clock. When I sit in the seat it displays "on" Shouldn't the light always display "off" if no one or someone too light is sitting in the seat? Is this normal, or is there something wrong with the sensors in the seat?
View 2 RepliesA few weeks ago, a relative was riding in the front passenger seat and asked me why the light said "passenger airbag off." I had seen that on before and didn't think anything more about it as I rarely have a passenger. Called Toyota to login the problem as I was traveling that week and thought I would be out of warranty before I could get it to the dealer. That particular light was on for some days afterwards and then I forgot about it. Tonight I noticed that "passenger airbag off" is not lit, but there is a light saying "airbag off."
I turned the car on and sat in the passenger seat, and the light that came on for my aunt didn't come on. Just "airbag off."
I swapped my cloth seats for leathers today and the airbag light came on after... the seats were out of a 2000 golf, so I was expecting to have to splice wires, but, the connectors were the exact same on the cloth from my car and leathers from the donor car... so I just did a plug and play... I scanned with vcds and got these codes:
Address 15 -------------------------------------------------------
Controller: 1C0 909 605 A
Component: 1M AIRBAG VW51 02 0006
Coding: 12621
Shop #: WSC 00000
2 Faults Found:
00592 - Seat Belt Switch: Right (E25)
30-10 - Open or Short to B+ - Intermittent
01218 - Side Airbag Igniter: Passenger Side (N200)
32-10 - Resistance too High - Intermittent
I take it the passenger seat is the problem... I didn't clear the codes, I wanted to ask here first before I did if I need to do anything to connectors there or just the clear the codes?
I have a 2004 Jetta which has the 2-wire seat belt sensor on the passenger side and a 4-wire sensor for the drivers side. I swapped seats from an older style MKIV which had no seat belt sensor on the passenger side and a 2-wire seat belt sensor on the driver side.
As of now the seat belt sensors are disconnected and I am throwing seat belt sensor codes for both passenger and driver side. I have already tried to clear the codes via VAGcom...took care of 2 ignitor codes, but not these seat belt switch codes.
Is it possible to splice in the 2-wires from the older seats to the correct 2 out of 4 wires coming from my car? What's the difference between the 4-wire and 2-wire connector on the driver side?
Also, reading through the DIY here: [URL] ..... It states that I would need a recoding of the Airbag controller in VAG-COM to deal with the airbag light. What this code is suppose to be?
I recently bought a used '06 Camry V6.
After driving it for several days, the red airbag light went on on the instrument panel. Certainly, I do not want to go to the dealer, not only because of costs, but also cause of the distance of the dealership from my home.
I did a bit of a research and so far have tried disconnecting the ground wire on the batter for half an hour, in order to reset the computer. Although, as soon as I plugged in the wire back and turned the car on, the light did not disappear.
After looking online, I found a similar problem and a solution regarding Toyota Sienna in this link: [URL] ....
-Following the advise, I remember that right before the light went on, I have tried to reach for the plastic water bottle that ended up deep under the driver's seat.
Is it possible that the airbag problem stems from the loose connector under the driver's seat? If yes, how should I approach this.
Also I recently had my intermediate steering shaft replaced [URL] .... Are there chances that such replacement caused the airbag to fail. This manual does not tell any steps to disconnect any yellow wires (or wires at all).
I recently noticed that when my girlfriend sits in the front passenger seat the light will randomly indicate that the passenger airbag is off. I took it to the dealership, they ordered me a new light to see if that is the problem.
Its really weird, she will be sitting in the same position for over a hour sometimes and then it will suddenly say that her airbag is off. the dealer said they tested the seat switch and it was working properly.
I will be bringing it in this week sometime and we will see what they say about the light. For now I have decided to take a picture/video everytime it happens to document it.
Last winter I had to replace my front passenger seat. The seat was starting to burn a hole or two, generally getting too hot for the passenger. At about the same time my airbag warning idiot light came on! I changed my front seat. The seat change was no biggy, but I keep getting the airbag light! Can this be cleared simply or only by a dealer?
View 8 RepliesFor a long time my 2004 regular cab truck has a quirk that both the driver (and passenger if present) must click their seat belts before starting the truck. If not, the seat belt chime and light flash, even though the seat belt light is off when the alarm is not sounding.
Even if the truck is in park, and the passenger gets out of the truck and back again with the engine running, once in drive it will start the seat belt alarm with everybody properly buckled.
A few months ago I was driving to work and the airbag light started to flash.
I took the truck in for the air bag wiring harness recall, and the airbag light did not flash since then, and for a little while the seatbelt problem went away.
1 month later the seat belt quirk was back again.
This past weekend the 5x5 air bag alert started. I checked previous posts, and confirmed that my air bag light does not ever light on my dash. I don't remember if it ever came on once the recall was "fixed".
My gut feel is that the wiring to the light is fine, and that this is a wiring problem in the harness. I saw a post that made a vague reference to the air bag sensor under the center console and the seat belt circuit and could find no more.
Looking for a wiring diagram? If the airbag light is out, does the 5x5 alert supposed to indicate that the bulb is burned out, or that the bulb is out AND there is an airbag fault?
Every time I start the truck, the Passenger Side Airbag light is on, which is saying the airbag is turned "OFF." I have to push the button to turn the light off, which turns the airbag "ON." How do I reset this to where the airbag is "ON" until I turn it "OFF?"
View 8 Replies