Mazda - Miata :: 1990 - A/C Not Working - Change Compressor?
May 17, 2011
I have a 1990 Mazda Miata, and the AC is not working. It has been switched over to R134a. I took it to a mechanic to have it recharged a few weeks ago. He said that one of the o-rings was cracked and so it was leaking around that. He filled it up and put some stop leak in it and for awhile it seemed to work fine. Then it stopped blowing cold air. I took it to a jiffy lube just to have the level of coolant (correct term?) checked. The person there told me that it was very low and was leaking around the valve stems. I tightened the valve stems and re-filled it. After 24 hours it had stopped blowing cold air again. I got a price quote on a new compressor and it is about $500.
So - my question is this - should I just put a new compressor in or is there something cheaper I could try first?
View 10 Replies
Advertisement
So, as the title says, my Miata won't start when it's hot. The engine keeps turning over but doesn't catch, and I have to let it cool down for about 20 minutes before it will turn on again. When it does turn back on, it blows a ton of white smoke out the back and I can smell gas for about 5 min afterwards. I have replaced the spark plugs and the wiring for them, and the problem is still there.
Also, I can bump start the car with little to no difficulty. It runs ragged for a few minutes then it runs great. So, what's up.
View 4 Replies
So, something odd happened to me today while driving. I was getting off a highway after about 250 miles of driving, downshifted from 5th to 4th, and when I hit the gas pedal after shifting, nothing. No acceleration. I shift back to 5th. Still nothing. Try revving in neutral, also nothing. I come to a stop on the exit ramp and try to start the car up. It starts up, hits about 1k rpm and stalls. Gas pedal does nothing still. What's up with this? I had it towed to my shop.
Couple tidbits of info: just had the oil changed three days ago. Checked the oil and it seems fine. I have an aftermarket he's unit in the car and lately, it's been a little wonky. When I put use my automatic windows, sometimes the volume will mute for a sec.
My car is a 2006 Mazda Miata base model. 5 speed manual. Power windows but not locks. No traction control. No cruise control. 40,000 miles. Oil changed regularly with full synthetic.
View 6 Replies
My car often backfires on downshifts. It happens as I?m decelerating in gear, and then blip the throttle to match the higher rpm of the lower gear. The car runs well and is well maintained. The spark plugs, MAF sensor, O2 sensors, and cat are all in good order. I?m confident the air/fuel mixture is working as intended by Mazda (at least under normal driving), so I?m not looking for a mechanical culprit. I?m sure it?s my style and frequency of downshift/rev matching which causes the backfires.
It happens anywhere from 1-2 times a week to 1-2 times a day depending on my driving, or on something like 2-5% of all downshifts. Personally, I rather like excitement of the backfires and the exhaust burble which accompanies them, it makes me feel like I'm in a race car. My question is whether frequent backfiring is going to drastically reduce the life of my catalytic converter and O2 sensors.
I don't mind replacing the cat 5 years from now instead of say 10, but I don?t want to have to replace it within the next 10,000 miles or less. My Miata is a 1999 model with 130,000 miles on it. The exhaust system uses stock manifold and muffler but with an AEM performance intake and monsterflow catalytic converter.
View 6 Replies
2001 Mazda Protégé 2.0 LX model.
When I turn on the AC I can hear the compressor working. When the fan speed is 1, 2, or 3 the AC button is green, the compressor is working but no air is coming out of the vent.
When I turn the fan speed knob to 4 the AC button light goes out and I have air flow from the vent. The hose from the compressor is cold to the touch but the air coming out of the vent on 4 is not cold.
View 10 Replies
Last week the shift got stuck in Park. I used the emergency release button to get into Drive. After this happened several times I took it to the mechanic who said the shift needed replacing. Got a new shift. The problem persists. I get stuck in Park about 1 in 6 times.
View 3 Replies
Problem: car cranks but doesn't start then randomly it will start. 2 different shops...first thought maybe battery (no it cranks) but said these cars are notorious for cam sensor problems they didn't have software to diagnose. Brought to dealership again battery (we were finally beat down and replaced battery) ...then brought home if car sat for a few days totally dead needed jumpstart....brought back to dealer they replaced cam sensor and timing belt...went to pick it up and you guessed it....cranked but didn't start....mechanic came out and it started....so after replacing several parts we are back to the same problem intermittent crank without start...
View 4 Replies
I have this vehicle, which keeps blowing out the catalytic converter, its been replaced 3 times in the last month, and the mechanic doesnt know why, he refuses to put another one on it, until he figures this out.
View 3 Replies
I have a Mazda Miata 2001, 152,000 miles. It's developed a metallic scrape from the right rear wheel. When I'm driving about 20 mph it sounds like a scritch every half-a-second or so, and if I'm going faster it just blurs into a metallic scrape. When I tap the brakes, it usually stops, and then it'll come back a little bit later (maybe when I hit a bump?) It comes and goes, but it seems to be more persistent now (or maybe I'm just always listening for it).
I took the wheel off and sprayed brake cleaner everywhere and I thought that had fixed it, but it came back again after a week maybe.
View 4 Replies
Car recently acted like it was running on two or three cylinders and cel came on and continued to flash. The shop that did the repairs is no longer a Mazda dealer, but has a factoy trained tech. Don't know the code #, but was told that there was a low voltage code, and a misfire code. The battery was replaced, throttle body cleaned and a new fuel filter installed. The cel came back on about 25 miles later. They rechecked the codes. Said it could be the converter, and cleared the code again. After about 150 miles, the cel came on again but the car ran normal. Talked to the shop again and was told the the converter problem would have to be serviced at a Mazda dealer. The engine did the running on three cylinder thing again. Since then, it seems to run ok but the light is still flashing. If the OEM converters are fragile are there better options for replacement? The car has 30,000 miles.
View 4 Replies
I have a 2007 Mazda Miata that I just found standing water under the passenger seat. Took it to dealership the drain is plugged if I had brought the car in when under warranty they would have done the retrofit it needs to fix their lousy design problem for free. I am trying to talk to Mazda and the dealership about them fixing the problem for free. They issued a in house service bulletin but not to the public.
View 6 Replies
I've got a '94 Mazda miata which is in good shape, with among other things a fair number of suspension upgrades. It drives really well, other than the clunk. On the occasional bump it clunks as if something is loose on the driver's side rear. I've checked the shocks, springs, jacked it up and inspected everything I can think of. I'm looking for wisdom from your decades of experience (in your terms wasted time) on what it might be.
View 3 Replies
My Miata stalls out on the highway but not on residential streets. If I open the gas tank ,it starts up again. This has happened with a full tank, 1/2 tank and 1/4 tank. How can I fix this?
View 9 Replies
I have a 91 Miata Auto. I bought it from someone that (I think!) never drain auto trans fluid during its 145K mile life. So last year I replaced all the gaskets/filters and tuned up the car. It runs fine except shifting harsh in cold weather. I have to mention that it seem to have no power and goes very slow on first few minutes.I used a pump to suck trans fluid out. It was so dark (even I dropped the trans pan and replaced filter/gasket). Then I pumped Lucas trans fix fluid in and it seem to improve. What should I do more to reduce the harsh shift condition in cold weather? Or is there a booster module need to be replaced?
View 6 Replies
I have a 2001 Miata. It's been over 100 degrees daily lately. The AC will blow sort of cold for about 30 minutes and the temp gauge will move towards the H hashmarks. If I turn the AC off, the gauge will slowly drop. I've also noticed that the amount of cold air is decreasing as time passes. In fact, the other day, the system was blowing air hotter than the outside temperature after about an hour drive.
The viewing glass has bubbling stuff flowing thru it. The recently flushed radiator is full as is the overflow reservoir.
View 2 Replies
So i was cleaning my 2007 mazda miata and i noticed one wheel has some fairly deep scratched grooves inside of it. I inspected all the other tires and the other front tire has similar marks but they are way way more of a surface/barely there scratches. The rear wheels are not scratched. I am also hearing a rotational noise when i drive. It gets faster as I accelerate and slower when I brake. I don't know anything about cars.
View 6 Replies
1990 Volvo 240. The ac doesn't work and about 6 yrs ago it was converted to r134a. How can I check it see whats wrong?
View 1 Replies
The oil light came on in my mazda pickup. So the mechanic put in a new oil sending unit, spark plus, wires, distributor. $250. Two days later the oil light came back on. So the mechanic put in new rod bearings, main bearings, oil pump, water pump, timing belt, valve cover basket, and oil filter (and oil, of course). $1300. Two days later, the oil light is BACK ON!! What is going on??
View 7 Replies
My 1990 f250 a/c has freon, and the compressor runs when i turn on the a/c but i get no cold air.
View 7 Replies
I have a 1990 mazda 2600i 4x4 truck that is leaking coolant on the right side of the engine about mid ways back. What that could be coming from? My light was very dim and I couldn't tell much by looking.
View 1 Replies
1990 Mazda Protege with a 1.8L DOHC, manual 5-spd transmission, ~173K miles on it. On my way home the other day, the car ABRUPTLY started to run very rough - with what I would call repetitive and incessant stuttering when accelerating (though I am by no means technical with respect to cars). I shut the car down, hoped the problem would go away, but when I started it up later that day, the problem was still there - the car BOTH idles rough and doesn't accelerate very smoothy. When I come to a stop, the car feels as if it's going to stall but stays running. This afternoon, I took it out on the road for ~3 mile drive (up to ~ 50 mph) and the problem is the same - but I did also notice, when driving, that the car gave off a smell reminiscent of firecrackers - perhaps a sulfur-ish smell. I googled the issues I was having and I got a whole array of problems - ranging from simply bad spark plug wires (which have been replaced in the past 1.5 years) to a stuck EGR valve .
Here's some additional info on my car: -Was just in the shop 2wks ago for overheating - found the thermostat to be bad - they replaced it and I no longer have the overheating issue. While there, they also replaced the belts for the alternator and water pump (Which had been squealing for quite some time) -Spark plug wires and distributor cap were both replaced in the last 1.5 years -Last oil change was > 6 months (but less than 3000 miles) ago - all the fluid levels seem to be fine -Though I think it is unrelated, the car is also making a high pitched squeaking noise emanating from the R front of the car while driving - I suspect this is the suspension-related as the shop informed me that I have one front stablizer link broken while the other is loose (and when I push down on the R-front side of car while it is not running it yields a similar squeaking noise.
View 1 Replies
