Mazda :: 2003 RPMs Are Starting To Jump / Clutch Replacement
May 22, 2011
2003 Mazda6, 3.0 liter, 6 cylinder, FWD. My RPMs are starting to jump, so I believe a clutch replacement may be in line soon. However, I'm not a huge car guy, and I don't have much experience in regards to replacing clutches.
(1) The RPMs are jumping occasionally at higher gears (not every time). How long do you think I could go before the clutch dies completely? I'm not a "racer", and I just use my car for daily driving.
(2) Do mechanics replace clutches based on symptoms alone, or can they actually visually inspect the clutch and determine that it needs to be replaced?
(3) When replacing a clutch, what parts need to be replaced besides the actual clutch itself? Also, I've read about flywheels needing to be resurfaced, but is that necessary?
(4) What manufacturer makes good clutches? As mentioned, I'm not a hard driver or anything. Just need something that is good quality and affordable.
(5) Is the best way to save money (I'm a graduate student) to buy an aftermarket clutch and have the clutch installed by a local mechanic?
(6) At what mileages do clutches typically need to be replaced? I know it depends on how you drive. Let's say you're a casual driver and simply use your car to get to work, school, etc.
View 6 Replies
Advertisement
I have a 1993 protege that was previously not having any issues. I recently had a mobile mechanic replace my axle after it broke. Since then I have had issues with the rpm's increasing but the speed staying the same or decreasing. This happens mostly uphill and especially when the vehicle is cold. Is there another reason this can occur besides a bad clutch?
View 17 Replies
I have a 2003 Mazda 6, 5-speed. Whenever I'm driving in higher gear (4th or 5th), the tachometer seems to jump. For instance, if I'm driving at 50mph at 3,000rpm in 5th gear and I want to accelerate to ~65mph, the tachometer seems to jump to 3,5000-4,000rpm, then drop down to 3,000rpm and then slowly increase as I accelerate.
What's the reason for this random jumping/revving? I don't think the clutch is going bad or slipping. It only seems to happen in higher gears, even without me shifting--only when I want to accelerate.
View 7 Replies
I took our '99 Mazda Protege in for a clutch replacement. The mileage is over 150k. The car was returned with the air bag light blinking and the cruise control and horn deactivated. All were fine beforehand. The shop eventually admitted that they could have broken the clockspring during the repair. They are going to get back to me tomorrow with a quote for the repair and they told me they are going to "work with me" on the cost. I don't understand why I should pay for anything associated with the clock spring repair. Another mechanic told me they had to secure the steering during the clutch replacement and probably forgot to do it, furthermore they should cover 100% of the repair.
View 19 Replies
I have a 2008 Mazda 3, and I have been bringing it to the same car wash for about a year now. It's the kind where the guys take it, while I sit in the lil' cafe and read. Eventually they drive it around front, wipe it down, clean the inside and hand it over. The last two times, the car needed to be jump started, because the battery would not start after the wash. The manager assured me this was normal, but the other guys at the car wash always seem surprised. Should I be thinking about getting a new battery? Is this really normal?
View 9 Replies
I have a 2003 6.0 and I got a scan gauge recently to monitor the fan speed rpm's.
When the engine is running at 2500 rpms the fan speed is only at around 350-400 rpm's.
I did have a code for IAT 2 circuit high I think I read that the egr is disabled when the iat 2 sensor is getting more than 4.8 volts.
Can a bad iat 2 sensor, egr valve or icp sensor cause the fan not to function properly?
View 6 Replies
We have a 2006 Santa Fe Hyunda with 100,000 miles that when we hit 80 mph on the highway the rpms drop to zero and stay there. We just had the camshaft and crankshaft replaced. Why this is happening?"
View 3 Replies
I have a 99 V6 original owner with 177,000 miles. The car has all the usual work done for its age and miles with one cam tensioner and associate seals, gaskets, water pump, etc.... Getting some burn oil smell and believe the other tensioner is starting to leak but it's not bad. Replacement of the cracked AC coil was difficult...
Lately when the car is in higher gears, light load, and RMPs around 1,400 to 1,800, the car starts to flutter and the rmps jump up and down a couple of hundred and you feel the car lurch a bit. It's not harsh. Feels like a miss but you don't feel much engine jump or knock. Under hard acceleration, the RMPs are smooth and no lurching.
When I back off down to 1,400 or 1,500 and accelerate easy, the problem returns. Sometimes I feel it up at 3,000 but not as pronounced. The car is not throwing codes.
All ignition components are fresh in the last year with wires, pugs, etc... I still need to get this car to 250K...
View 3 Replies
My car is hesitating when I shift and accelerate, and revving up the tach after I shift into 5th but the speed doesn't match.Also, in order to start the car I have to press the clutch practically all the way to the floor.
It has 53,000 miles on it. I took it to the dealer, and they said I need the clutch and possibly flywheel replaced.
This seems low mileage to me. I have driven a stick for over 31 years. My previous car was a Honda CRXsi and it was over 110,000 miles before I needed a new clutch.
Is a clutch replacement this early normal for this car? Or is it me? I don't think I ride the clutch.
View 15 Replies
At the beginning December I put my brand new winter tires (general altimax arctics) on the factory steelies and put them on the car gearing up for the snow. Not to long after the install I notice that I was getting a very strong engine vibration starting at 3,000 rpms and it stopped around 3,100 rpms no matter what gear I was in. At first I though it maybe just the cold affecting the engine. Well...
Last week I put my summer rims and tires back on for the 1,600 mile trip to MO and back, and like magic, no more heavy vibrations. Smooth acceleration throughout the normal driving rpm range. I just changed the oil and tranny fluids Tuesday after we got back and with the warmer weather the car is running smooth as silk. Still an awesome car with awesome mileage and couldn't be happier.
View 7 Replies
I have a 2003 4 cylinder automatic Camry with around 108,000 miles. The other day, with the heating on, I felt it little lurch as well as a small jump in rpms at times while rolling on idle. This seemed to occur right after a hissing sound stopped after it sounded, pretty quietly, from the rear of the car for a couple seconds. To me it seems like the kind of a lurch I sometimes get when turning off the AC, which makes sense because the AC turning off reduces strain on the engine.
It's definitely not some really bad problem and no lights are on, but something I'm a little worried about nonetheless.
View 2 Replies
My wife has a 2000 t&c with 150k on it its a fwd with 3.8 and about a month ago while driving we noticed the rpms will jump up 400 and go back, with cruise control on or off being held at a consistent speed. and about for days ago it started shifting late. Still has all gears fluid looks o.k. and is full no check engine light .
I am hearing transmission solenoid, tps sensor, input sensor, output sensor, tcm, iac, map, or egr are all possibilities or a rebuild . Or simple as a flush.. tonight i went out n started it it idles around 800 tried to hold it at 1200 and it would for a second and drop back to 800 with accelerator being slightly held. Not sure if related. Just observed it..
View 2 Replies
1989 Saturn 5 speed, 4 cyl, 185,000 miles. Just started overrevving, when I try to go into 1st or 2nd or idle RPMS jump to 4500. So not a good thing. Do not tell me to buy a new car, not in the budget, or maybe it is.
View 6 Replies
Basically, when I just cruise in say 6th gear, and then step a little on the gas (or there is a hill), the engine rpm's jump up by like maybe 500 rpm's without a noticeable increase in speed, and there is no downshifting either.
I am sure this is normal, right? So what is the transmission doing? Coming from manuals only in the past, this seems strange.
View 6 Replies
I experienced some weirdness trying to jump start a friends 2001 Prius and the 100 amp fuse got blown. I read the user manual and am pretty positive that I did not reverse polarity on the auxiliary battery, with the jumper cables. But as soon as I hooked up the cables the headlights and taillights came on, as well as both turn signal lights steady on, and I couldn't turn them off. I checked and checked. The key wasn't in. All the headlight switches were off. I just couldn't figure it out. After trying to let the auxiliary battery charge for a while this way, the car was still totally dead and it was weird and I gave up.
The next day my friend called AAA and they couldn't start it either. But she said they were pretty clueless, refusing to believe at first that the battery was in the trunk, and suspects maybe they reversed the polarity on the cables when they tried to jump it. She didn't see the headlights come on this time (although it was now during the day).
View 8 Replies
I have manual shift and the clutch is worn out. when in motion if I press the pedal the rpms jump but the car does not accelerate. only way to accelerate is to press very gently.
Q: do I always need to change the flywheel, which is expensive or changing just the clutch will do??
View 12 Replies
This hot blond was stranded at the store's parking lot. Her VW had a dead battery I jump started it for her. When I connected the cables, my alternator was whining very loud.
Did I damage my alternator or did I put too much load on it? When I heard the whine, I pressed the accelerator then told her to start her car. Success but I am worried I shortened the life of the alternator.
View 7 Replies
We have a 1990 Ford Ranger - 2WD 4cyl - sometimes when we try to start it, it will not kick over the final time for several tries. When it finally catches the voltage gauge will flicker and jump around. When the gauge flickers, the truck will shut off...then the same issue with trying to start it again. Some days it runs just fine and others it will stall out 3-5 times in a 15-20 minute drive. We have been told it's the DIS Module OR the Crankshaft Position Sensor OR the Voltage Regulator OR .....
View 2 Replies
If I'm giving a jump:
Assume I hook positive and negative cables to the respective terminals of one of the two batteries. The alternative would be hooking positive cable to one battery and negative cable to the other battery, or does that make 24 volts? I'm also assuming if it is just the one battery, it does not matter which one you jump from?
If I'm receiving a jump:
I assume positive cable to positive post of one battery and negative cable to a good ground under the hood somewhere? Again, does it matter which battery I use? I wonder where a good ground is on this crowded diesel engine and aluminum body. Front radiator supports?
View 14 Replies
I have a 2001 F250 Crew Cab with Powerstroke. The dash lights are starting to go out one at a time. How do I get to and replace the bulbs?
View 14 Replies
So the water pump on my early 99 (158k miles) is starting to leak just sitting in the driveway, did a little research last night and read a few write ups. Just wondering if any tips or tricks I could use to make this go easier. Also any list of parts I should replace and/or might need. I read on one write up about replacing it with an Airtex water pump and was wondering about what people thought of those, I would rather fix it right then just go with the cheapest parts. Possibly there are better brand water pumps out there?
View 5 Replies
