Malibu - Chevrolet :: Grinding / Squealing After Brakes Applied?
Jul 2, 2014
Here's my issue, after a full break job my right front brake began to grind. Curiously it wouldn't grind initially after breaking soon after start up. I could go on and slow break for quite a distance, but soon after a hard brake or just slow breaking long enough the grinding begins. I've taken the car back to Firestone three times and even after a few adjustments or cleaning the problem persist... I've starting to feel bad for Firestone and embarrassed to be holding on to this 99 Chevy. I can't continue to drive this small car that sounds like a MTA bus while braking.
But I digress... I did notice, purely by accident (or it may be a mere coincidence), a few times the ABS light came on and during those periods the grinding was less abrasive. This leads me closer to believing the issue is with the caliper.
View 11 Replies
Advertisement
I have a 2008 Chevy Malibu. Lately when the engine is cold I will get to the end of the street and when I apply the brakes the car will make a clunking noise and a couple of times it has actually died and I have to restart the car. I only experience this the first thing in the morning, after that the car seems fine. I cannot tell if it is the brakes causing the problem or the transmission.
View 5 Replies
2009 Malibu had normal brake replacements. Front brakes began squealing. Mechanic said there was a lot of dirt, cleaned. Still squealing. Claiming that the brakes were getting hot due to weather. Well now it is cool still squealing. He said brakes are in real good shape. Why are they squealing.......... never had this problem before. He said they don't make the brakes like they use to, ok to drive because brakes are in good shape......I don't understand.
View 6 Replies
I bought my 06 Corolla LE last week and just started hearing a nasty squeaking sound whenever I applied the brakes. I took it to the dealer today and 4 hours later he calls me and tells me that he had to readjust my back brakes and lube them up and it should be fine..About a half hour into driving the car around town I start hearing this noise again. Now he's telling me to bring back in the morning to see what the issue is.
My question is besides the brake pads and rotors which were checked by another mechanic that said they were good what the hell could be the issue?
View 3 Replies
I have been doing my own brakes for years. I have had some that were not easy to keep from squealing but this one has me wanting to get rid of the car. We have a 2008 Dodge Magnum R/T package. Roughly 38K miles on the car. When the car reached around 10K miles the rear passenger wheel would squeal when you applied the brake. Rotor surface was smooth as glass. I took off the rear rotors only and had them turned. Problem went away for about 5K miles. Then the fronts started squealing.
I replaced the fronts because hte factory did not leave any material to be turned and noted that Dodge glued the pads to the calipers like they would never need to come off. Problem went away for a little while. Then it came back with a vengeance. I replaced the pad material on the fronts with ThermoQuiet pads from Raybestos. Problem is coming back again and now I cannot tell which end of the car it is even coming from because it it so loud. My wife drives this car very carefully. My thought is she is polishing the rotors too smooth and this is our source of noise.
We are at the point of squealing again and I am at my wits end with this. If I light foot it, no noise. If I stop like I think it should be stopped, not killing it, the noise is there. If I stop very quickly about 3 to 5 times in a row the noise is gone for a little while until the pads cool and then it is back even if I am on the same journey.
View 4 Replies
So I have a 2003 Passat wagon. While driving down the road with no brake pressure applied the front right brake makes a squealing noise. As if the caliper doesn't release pressure....what should I do? Any hints?
View 6 Replies
2008 Passat Komfort Wagon with 34,500 miles. Started to get grinding sound when I applied brakes, which diminishes as I drive. Thought it was rust, but sound is very loud and sounds just like pads are gone and digging into rotors. The brake warning light is not on.
Dealer told me rear caliper was closing unevenly and recommended service---not covered by warranty of course. When I picked-up car same noise as before. The service manager told be that the car was just washed and the rust built up in the last hour---I could believe some built-up, but the sounds made my teeth ache. When we went for a test drive the noise got quiter, but was still apparent. The SM told me this is a "normal" noise. I have had many cars with disc brakes, dating back to a 1960 Jaguar; none have made this "normal" sound.
View 6 Replies
Over the last 2 wks or so I have been hearing grinding noises out of the right rear brake. 1 day it sounds like it was metal on metal. Think is just all the road salt catching between the brake pads?
View 10 Replies
Is it just me or is this an ABS thing? during a snow storm i was going about 25mph and had applied the breaks and started making a grinding noise... if it is the abs how are you suppose to work with the response time for a quicker stop.
View 2 Replies
Coming to a left turn signal I was anticipating it turning red on me, and I drove into the turn lane briskly 30mph and then applied brakes as I made a u-turn. It sounded like a cross between dragging the front air dam and metal on metal brake grinding as I made the turn. Stopped immediately and did not scrap the air dam and all front end components checked out, okay. Car is driving just fine now, has only done this once.
View 18 Replies
I noticed yesterday a sound, like a grinding sound, *sometimes* as I apply the brakes to stop. I'm at 68k. The noise only happens when the brakes are applied so I suspect there is an issue with my brakes again.
Some BACKGROUND info: At around 60k (or 8 months ago roughly), the front pads were replaced after the brakes were squealing and a pulsating brake pedal when stopping. The pads were replaced by a dealer. In addition, both front/rear rotors were turned at the same time. Rear pads had 40% at the time and were not replaced.
Some weeks later the pulsation came back and I went back again and they machined them again. For this current issue I was thinking about taking the car to someplace local (not a dealer) and getting a free brake evaluation of what is going on.
I'm also concerned that all this machining the dealer did to eliminate the pulsation may have decreased the life of the rotors and perhaps they need replacement now.
View 3 Replies
1950 cadillac - standard drums on all 4 corners.
I put new wheel cylinders on each drum, and replaced the drivers front hose, as it was clogged. The passenger side I left because it works and doesnt leak. I've cleaned all the brake surfaces, shoes and drums, and bled everything.
When I brake, and only when I brake, the front right makes a grinding noise and the car pulls to the right.
I tried tightening the star wheel today to bring the shoes inward in hopes that would equalize brake pressure up front, but when trying again today, I got that grinding sound still.
There is no scoring or gouges on the shoes, drum, and the inner and outer ball bearings seem fine - round chrome balls with no discoloration, no gouges on the spindles. Granted I don't drive this far at all, especially now that I have this grinding.
How can I really tell if its the ball bearings? It only makes the grind when I am on the brakes.
View 19 Replies
There is this incessant squealing and grinding coming from my brakes. I have taken my 2010 Hyundai Accent to FOUR different mechanics and none of them have been able to figure out what is wrong with my brakes. I have replaced all of them and each mechanic has cleaned and adjusted them. But THREE days after, every time without fail, it is back as bad as it was before. It is only the rear right brake drum that is doing it still and I have no clue what to do. Something is definitely wrong with this car.
View 3 Replies
I have a 2005 Chevy Malibu, automatic transmission. When I put it in reverse and then press the gas pedal, I get a rather loud grinding noise for a couple of seconds. What is causing this, and is it doing any real damage? I have no other problems with the transmission.
View 2 Replies
I heard some noise which seems coming from the brakes. But the noise is always there even when I do not apply the brakes. I think if the noise relates to the brakes or the pads, there should be no noise until I apply the brakes, am I right? My car: Chevy Malibu, 1999. The brake light is not on.
View 1 Replies
I took my 2010 Sonata GLS (86K miles) into the shop last Thursday for an alignment and new front brakes since the old ones were on the wear indicators and doing some squealing/squeaking on soft left turns. Got a call from the mechanic who said the rotors were also shot, so I had them replaced as well.
On my normal commute on Monday and Tuesday this week (approx 10 miles, 95% highway), I noticed that when the car was moving at 15mph or less in a straight line both front wheels were making a noticeable high-pitched squeal/squeak, which went away with increased speed and when braking. I figured it might be a break-in issue but when it hadn't improved by yesterday I made an appointment to have the car checked out by the mechanic again today.
Got the car back today and the same sound is still happening, though now it's in the 60mph range and seems to come and go regardless of wheel direction. The mechanic said he took the brakes apart, found no issues but cleaned and lubed everything as a precaution.
I'm starting to wonder if its the bearings that are shot, but the sound hasn't remained constant as I would expect with a bearing issue. All the parts used are under warranty, so the next step I have available here is to have the brakes and rotors replaced.
View 4 Replies
2013 Platinum. See sig for details. 37,000 miles. 1 owner. Truck has been basically parked since June. However I take it out for a quick spin every 3 week for 10 miles or so. Currently has storage insurance on it.
When backing out of the garage the brakes are grinding and squealing bad. Also getting feedback through the steering wheel for the first couple miles which leads me to believe it's one or both the front brakes.
View 6 Replies
My 2007 4 cyl. Malibu does a shimmy and shake when I step on the brakes. It seems to be worse when traveling at a faster rate of speed then when driving around town.
View 7 Replies
For the past 2 months or so, my brakes sound like a horn when I get close to a full stop. The pads are about 7 months old. Brake fluid is good. Oil isn't fresh but I changed it about 9 months ago. 1997 Chevy Silverado C1500 2WD 5.7L.
View 4 Replies
I have a 2003 Impala, total mileage little of 122,000 miles, I bought the car back in Dec 2014. When I bought the car I got all the paper work on the work the dealership did on the car prior to me buying it. One of the things they did was put new brakes and rotors on the front. Since then I have replaced the backs. However after about 4-5 months I notices that from the front passenger side when I had to slam on the brakes or was braking from high speed I would hear a grinding sound coming from that area. I have taken it to two places and both have inspected both the wheels and rotor's and say they are fine, they commented that the pads were not the best but more then adequate for this car. Of course when they drove it around it didn't happen and it doesn't always happen. Both places said it could be the pads or rotors but without replacing them there is no real way to tell. How can they both be viewed as good and in good condition and I get this grinding sound from the one front wheel from time to time when I break.
View 12 Replies
I have fairly new brakes on my 97 Chevy Tahoe with 202,000+ miles. For the last several months when I come to a stop, sometimes the brakes make a grinding sound (or 'boy-yoi-yong' sound- it's hard to tell) and the brake pedal feels like it 'slips' although the brakes do always stop the car. The brake don't always do this but it happens at least once or twice a day. Sometimes the problems is very mild, other times it's very noticeable. have it checked by two mechanics and they can't get the brakes to misbehave so they can't find the problem. All they did was flush the brake fluid twice and tell me it MIGHT be the master cylinder or the ABS system. My husband got laid off from his job and I am disabled. We can't afford to start fixing everything the mechanics THINK might be wrong with the brakes.
View 3 Replies
