Removing the back seat to allow the front seats to be reclined more? at 6'4'' I need more leg room! Or any other way on getting more leg room in the front seats?
View 1 RepliesI am tall 6'5" and was curious if is possible to move the seat rails back to create a bit more leg room.
View 3 RepliesOn my LS 600 HL- there are two buttons on the rear door handle. One is C and other is M.
One lights up, when pressed. What is the function of each?
I would prefer to leave the back seats in reclined position permanently but I find that they go back to erect position often (I didn't particularly test this function). What is the function of the C and M buttons?
I have a '95 BMW 325. The driver's seat reclined and will not come back up... not digging the gangsta posture or the extra ab workout to sit up straight (luckily I don't have to drive very far at the moment). The motor to go back seems to work (obviously) but makes no noise when the button is pushed to move it back up. What do I have to do to fix this?
View 1 RepliesTrying to lower the seat or seat rails in an SC430. I would like to get the seats down about an inch. Can the seats be taken out and distance between the bottle of the rail and the seat shortened somehow.
View 2 RepliesThe front seat headrests feel like they need to be reclined, but they are fixed in position. I thought I would get used to them, but I always feel like my head is pitched forward a little too far. Any aftermarket headrests?
View 2 RepliesI have a question as to the sc430 reclining position.. my Sc430 will not recline far back as I would like for my normal driving position.. My GS300 reclines far back as I want.
View 14 RepliesMy passenger chair seat won't fold back? Passengers can't get in the back seat. The manual (pull up) lever is jammed?
View 4 RepliesI've had a squeak, for lack of a better word, in the back seat near or rear window. I couldn't tell if it was the rear seat back or something else.
I began lowering the roof and stopped the process by turning off the ignition while the roof was just setting down in the trunk. This leaves the raised covers pointing up vertically to let the roof pass. (When the roof is up these covers form the rear "package shelf".) In the center of the car just under this cover there is a round black rubber bumper stop the size of a 50 cent piece (whatever those are). This stop is adjustable up-and-down. Rotating it counterclockwise raises the stop and clockwise lowers it. I raised my rubber stop, by hand, a couple of turns upward.
That's all. The squeak is gone. This bumper apparently bind the package shelf to the roof when it is up and stops if from moving around - and squeaking. I don't know the Lexus method for adjusting this bumper stop but a turn or two made a wonderful difference in my mood today.
I am trying to remove the front seat warmer switch. Been trying but no luck.
View 3 RepliesHow difficult it is to remove the rear seat on a 5th gen 2002 Camry XLE? There's a set of leather seats at a local yard and I'm thinking of buying it.
My follow up question is what the h ell do I do with my old seats? Is there even demand on Craigslist for that stuff? They're power and in good condition.
How to take out the back seat of the Passat? I'm needing to run a Pioneer IP bus cable to the trunk and it would be easier with the bottom of the rear seat out. I looked in the archives and found a thread saying you just pull up on the bottom. I have pulled up on the bottom of the seat so hard that I'm worried that I will break it. I still can't get it out. Is there something I'm missing?
View 6 RepliesI just got my car back from a body shop, after they fixed all the rock chips on the front. Now I realize the seat position memory is not working for both the driving and passenger seats. Not only the button does not move the seats, but I can't set the new positions into the memory either.
View 2 RepliesMy uncle has an 05 F150 extended cab. When he bought it he put his license plate in the rear window until he could get some bolts for it. When it was there it fell between the back of the rear seat and the back of the cab. Currently he has one plate on the rear, but is worried he will get stopped for not having a front plate installed. So he knew I am an FTE member and I could find out how to remove the seat back. I have not tried to remove it nor seen if I could reach it.
View 4 RepliesTrying to install some nice seat covers in my '11 supercab and can't seem to figure out how to remove the rear seat back. What is the combination?
View 2 RepliesHappened last week - both front seats can't be adjusted anymore back and forth - just slide freely.. Is there a way to fix this?
View 2 RepliesI've got a 2014 f250 xl super cab and can't for the life of me figure out how to remove the back seat back.
View 2 RepliesI purchased two new exhaust tips for my 2006 sc430 because one of the exhaust tips was slightly bent. I thought by removing the screw near muffler would be all that it took and each one could be pulled off. However after removing the screw from one of them, I could not pull it off.
View 7 RepliesI'm doing PPE headers right now but stuck with steering shaft I removed 1 bolt in the car and 2 in the engine bay on the shaft.... but there's just not enough give to slide the shaft out. I need a crash course on this thing pictures photos or whatever would be nice.
View 1 RepliesI do have heated seats and a power driver seat. I need to remove my seats in order to dye/paint my carpet. Any guide where to start with this? Seems kind of difficult.
View 5 RepliesI am looking at using a 2009 F150 XLT to rig up a soil sampling truck. I was hoping to remove the front-passenger and front-centre seat to make room for a probe that will go through the floor into the soil. As I was looking through articles to see if this was possible I read that some newer models dont make this easy, as there are air bag sensors and seat belt sensors that screw up the process. Before going out to look at the truck and make an offer, I was wondering - if there are any tips for removing these seats.
View 3 Replies