So yesterday I had Error 3 code display on my cd player and after messing around with the device i was able to get it to eject all the cds. Thinking all was well, i tried to load one cd and it won't even respond to me pushing on the button. There is no noise or error code coming from the unit. Whats going on here?
View 5 RepliesThe car has an obvious misfire and the scanner says its Cyl # 8. I tried the "italian" tune-up and under heavy throttle the miss goes away. I swapped coils and the miss stays with Cyl # 8. I pulled the injector, and can't see anything wrong.
View 11 RepliesI noticed the light below which seems to be a headlight self leveling error appear today. I know it came on a while back and disappeared butt the place its located is unnoticeable as its in the top corner and you have to tilt your head to see it so not sure if it came on many times.. But yeah I saw it today while waiting for my turn at the car wash since it was nice and sunny out and I leaned over to pull the foot brake release then saw it... It seemed to disappear a few minutes later.. then I stopped somewhere, came back started car and same thing and then it disappeared again. A while later it came on stayed on..
what could it be? I am aware that there maybe a 2 sensors, one in front and other in rear axle? I also know there is a module for left and right side... I am wondering what it could be, but I haven't got the code read yet..
So I got some burned cds stuck in the unit just like everyone said would happen. the unit was full with 6 disks at the time. i removed the unit, removed the cds from the unit, and reinstalled it. once reinstalled i disconnected the battery for 20 minutes to clear any memory and when i tried to use the changer once more the error code 3 returned and the unit still reads full. I am guessing I was supposed to manually move the trays back to the empty position prior to reassembly because I dont hear them attempting to move at all. Even after I cleared the memory the car never read the disc trays as empty so that's my best guess.
View 14 RepliesSo of course it has to happen 3 weeks after my warranty expires. My CEL comes on and I have it read and the result is P0440. I find out that my wife has a habit of topping off the gas tank and so I am thinking that she has probably ruined the charcoal canister. It is something easy to replace?
I have an 06 limited edition... Yes, she will not be topping off any gas tank anymore.
04 RX 330. About a week ago, the car died on my wife. The instrument panel was working but nothing else, no radio, windows, steering column, etc. We replaced the battery and had the same problem with the new battery.
Working through all the fuses & relays, I discover the main fuse, 140amp fuse link, had gone bad. The fuse is bolted on the sides with an 8mm and a 10mm bolt. After taking the fuse box apart, to be able to get to the bolts and remove the fuse, I replaced the fuse, which happens to be a factory only fuse, couldn't find it at any local auto parts stores or amazon, the car started. I have windows, steering column, radio, chair, etc. The only thing not working now is the navigation screen, which also controls the AC/Heat, and the back up camera.
I've gone through the manual and have checked every fuse that has any reference to nav screen.
I have a check engine light for the Evap. the code there is a hose that comes off and you get the code. I have looked high and low for this hose, where actually this hose is or put a picture up so I can find it.
View 7 RepliesP0051 together with VSC and VSC Off Lights
Over the weekend I had multiple P0051 and VSC and VSC Off Lights CELs
I have reset them using my OBDII scanner. It keeps on coming back.
This means the BANK 2 SENSOR 1 (just before the CAT) is reading low temps and therefore throwing a code. I get this.
Question is why do the VSC lights go "ON" too?
This started when I installed my ScanGage e this weekend. This is a change point.
Before I go purchase a Denso sensor, I would like to perform a series of tests:
1.Remove the ScanGage e. Test drive if any of the CELs (P0051 and VSC) come back.
2.If the same set comes back, clear the VSC lights code using our home made device.
If the VSC lights disappear and the P0051 comes back, I will replace the BANK 2 SENSOR 1 Oxygen sensor. Prior to replacing, I will check for wiring issues on this sensor.
My check engine light came on.. so I took it to express tires.. And they said that they need to replace my vacuum hoses cause it busted ... well when I saw the guy used the obd checker thing.. after checking the codes.. i saw that when u turned on the engine.. the vsc on and vcs off lights came on..
So I figured after he fixed the problem.. it will go off.. well after he got done.. fixing the problem.. I drove away.. after bout like 2min.. i had to turn around cause the vsc on and vsc off came on.. and I told the guy to check.. And he used his checker.. and there was no problem.. and the "check engine" light is not on anymore.. just the vsc on and vsc off!!
Could the checker.. messed it up??? the vsc off button.. only works when the key is turned on.. " not when the engine started but right before it.. when the power comes on" so the button is working correctly.. it just comes on.. when i start driving the car...
And no they did not check my tire pressure or do anything to the tires or the wheels.. it just turned on.. when he inserted the obd thing to check..
And yes I read the [URL] .....
Is it dangerous to be driving with the vsc and vsc off light on??
So this morning I started the SC up early to warm up a bit before I took off for work. Its 19 degrees outside. when I got into my car to leave the check engine light was on. Everything seem alright and the light not flashing so I thought I would stop by AutoZone to have code read. I was told T stat code. And that makes sense to me cause the temp gauge didn't hardly move off cold on the way to work. I noticed this once before when the temp dropped pretty low but didn't think anything of it.
View 5 RepliesJust read that a clogged EGR valve is common and reduced performance and increases emissions. Need to clean this valve? Where is it located?? Just noticed tonight that there is not a lot of suction from my vacuum lines and I wondered if this is related. Plus I have a p0430.
View 3 Repliesy '02 SC430, which had been in an accident, is throwing a low voltage code and showing the airbag light. What was the reason for the code (C1336)?
View 6 RepliesLately I have been working a lot with my cold air intake. One of the vacuum lines keeps popping off. Today I got a check engine light and VSC and VSC off light. Is that due to the tough idle caused by the disconnected vacuum line. I erased the code and so far it has not returned.
View 1 RepliesI have recurring P0705 trouble codes. Lexus dealer checked the N/S switch itself and said it's good. I checked all the wiring, found an open, shouted Eureka! Ran a new wire, now all wires test good, but still getting the code. SO - I think I may need to adjust the position of the switch, since the trouble code is for a range malfunction. BUT - I can't find a procedure anywhere.
View 3 RepliesSC430 came up with the check engine light, showing a "Oxygen Heater Circuit Malfunction", code P0155 (bank 2, sensor 1). Searching, I found out this is the oxygen sensor in the passenger side exhaust manifold.
My car is high mileage (over 130K), it's hard to justify purchasing a $230 sensor and paying for installation. My only goal is to keep the check engine light from turning on and passing state inspection/emission (the check engine light will prevent passing inspection/emission in my state).
Replaced my post cat drivers side O2 sensor tonight because I was getting zero voltage and a p0430 code. This is bank 2 sensor 1.
But I'm still reading zero voltage!! How could I still be getting zero voltage?? I checked the connections and they are firm. Checked every single fuse in car.
After my recent accident, the center console lights don't illuminate. My nav door doesn't close too. Could these all be related?? The connector for the O2 sensor is right next to the console, so maybe there is a loose connection or plug or perhaps a stray ground?? I do have wires all over the place in under the shifter bezel from aftermarket stuff..
When backing out of same parking spot, I always hear a clunk, clunk, clunk, noise in the front while turning the steering while back in the fixed position. I have heard this noise in the past but did not think any thing of it.
It's hard reproduce this noise, it seems to only be happening when backing out and turning the steering wheel. Car only has a little over one thousand miles.
I used Maxidas for scanning my GX470 05 and I have error code C1336 ... How to resolve it ?
View 8 RepliesReplace this when they got a code p0440? If so, which way did you go about replacing? if so, did u have to drop the tank or from cutting from underneath the seat? Is this the same location as from the 1st gen is300?
View 12 RepliesGot the p0051 error code and its calling for a o2 sensor. What brand does lexus use? I rather get one on line but dealer quality.
View 12 RepliesSince 1 year i have this error code in my GX 470. I have replace all oxygen sensor but after 1 day the error code is coming back. How to resolve it ?
View 14 Replies