One thing I cant clear is how to fix the annoying door clicking. The one bolt behind plastic cover on body side isn't a torx 40 its a bolt/philips and its tight. My 2 bolts on door side dont seem to be getting tight. The doors still clik seems to be in join in middle of door arm.
View 11 RepliesLast week when I had my car at Lexus dealership for the air bag recall, they took it upon themselves to do an inspection and came up with a few "recommendations".
The one that intrigues me is "found transmission mount worn/loose" recommend "replace transmission mount".
I will take car to my friendly local repair shop this week (never go to Lexus dealership unless it's free).
I'm no mechanic but I've been around cars for a long time and I've never heard of this before: besides the car only has 50000 miles on it.
Am I possibly being scammed or is this legit?
I have a 430sc 2002. I have been noticing lately that it seems to be loose on bumps on the road in town. On the highway it is still very smooth. I was thinking about taking it to a alignment shop and having the bushings checked. Is there anything else I should get checked?
View 14 RepliesAfter a rough winter here in NJ there are a ton of pot holes and I think I may have jolted loose the rear view mirror. It now shakes so bad I can't even look at it. It makes me dizzy. It seems like it is loose where it connects to the windshield, not where the actual mirror connects. I took off the smaller of the two covers but didn't see anything I could tighten. It also doesn't appear that the actual mirror comes apart. I have to point it away from me at night, it's like a strobe light!
View 4 RepliesI test drove the sc 430 the other day, I found it very smooth and very soft ride. I noticed that when I accelerate the car feels heavy as if it lacks the torque. Is this normal?
Also, the steering felt loose at high speeds above 60mph. Is this normal?
Due to the rain this weekend I decided to clean out my interior and do some maintenance. Lately my driver-side door has been making a squeaking sound. As such, I decided to lube up all the doors just in case. Upon inspecting all the doors/hinges I found that both the driver-side rear door and passenger-side rear door hinge bolts are rusted real bad. These are the bolts that connect the hinge to the door rather than the hinge to the door frame.
I inspected the door for any sign of water intrusion, but could not see anything out of ordinary. Also, nothing else was rusted or appeared to be water damaged. I inspected all the other hinge bolts around the car for comparison and they were fine. It is strange that both rear passenger doors have this issue. I bought the vehicle used and the Carfax comes back clean with no accidents or damage reported.
The only other time I have seen this is when the door has been worked on, and a socket was used which stripped the protective paint off the bolt. Even then only the rough edges of the bolt rusted, and not the entire thing. While I could foresee one door being worked on, I do find it strange that both would have needed work. However, this assumption does not rule out the possibility.
My only other issue of concern which may play into this is the surprising amount of sand I find on the exterior. As good as one can clean a car there are always some places that will never get fully clean. With that said, while the exterior is clean I have found sand residue in little crevices (weep holes) and corners throughout. I am sure that sand and moisture would play a part in causing rust to accumulate, except that no other parts show any sign of rust. This is certainly bizarre to me. I plan on replacing the bolts, but would like to remedy the problem before hand if possible.
Finally took the Wolf in to see about an engine rattle thats been getting worse. The culprit - loose engine mount bolts! Dealer decided to order new bolts, not just tighten the old ones. Also mentioned a recall for the transmission software. Odd that the "recall" wasn't listed on-line for my VIN. It must be the one that smooths the tranny a bit, it is a bit jumpy at low speed.
View 2 RepliesSo i folded down my seats today to try and fit a box in and i noticed that the two lower unibrace bolts were unscrewed about half way. When i put it in, those bolts were pretty tight. There is a little movement if i push down hard on the bar. Those dam nutserts dont seem to be a good long term option. I mean if one of them was loose then , but both are loose, and the tops are perfect. Im guessing because maybe the bottoms are taking most of the pressure.
View 24 RepliesGeo Metro loose head bolts... I have a 96 Metro, and for some reason the head bolts loosen by themselves, leading to over heating and planing head ... well you know.I had a farm for 20 years and took care of all equipment myself, have rebuilt numerous motors, but this geo is the first I have seen where the bolts loosen. This is the third time. I know they are tightened right , because I have the tools and experience, but not with this. Other than jb weld in the bolt holes.
View 7 RepliesStarted up the SC 430 (2002) and a clicking noise is coming from the engine. After engine is warmed up noise settles down. Have 71212 miles
View 10 RepliesI'm I just purchased a SC430 2002, car make a clicking noise when shifting gears. Example when I turn my car on and shift from Park to Reverse I hear a clicking noise and then when I go from Reverse to Drive it makes a clicking noise. Sometimes it just goes away. Is it a transmission issue or if this is a common sound.
View 3 Replies2001 Explorer sport trac. I had a shop install new front pads because I couldn't brake the caliper bolts loose. I noticed they didn't use any grease on the pads from what I can see, and there has been a quiet rubbing/squeaking sound coming from the wheels (mainly when pressing the brakes). I assume it's the brake pads/caliper parts that still need to be greased. I have the right kind of grease and I'm about to do it, but what parts of the pads/caliper assembly need to be greased?
View 11 RepliesI replaced my rear brake pads this weekend. I used oem pads and used the shims with CRC lubricant. I also compressed the brake calipers and made room for the new pads. I also tried to take off one of the rotors but it would not come off even with putting screws in the rotor.
Everything seemed fine and brakes were strong but when I went for a test drove there is a clicking sound at low to medium speeds come from the rear passenger side. I checked the retainer pins and they are on correctly.
What the problem may be? I would like to spin the wheel but the parking brake is on. Is it okay to take off the parking brake while jacked up if I block the wheels??
Are we supposed to put anti sieze on the turbo to pedestal bolts. They were really hard to break loose when I pulled it Cheater bar tight. 18 ft. lbs sound right ?
View 2 RepliesI recently noticed the cover for my driver-side door lock seemed was loose and the door lock would move around a bit. Today, to my utter shock, I noticed the door lock cover was missing and it looks like I cannot see the door lock cylinder, worried that it is missing too!
Is it possible for the door lock cylinder to easily fall out of the door if the cover was loose?
I am hoping that the door lock cylinder is somehow physically connected to the door and wouldn't just fall out, perhaps it fell inside the door and I cannot see it. I haven't had a professional look at it yet, but if I am missing the door lock cylinder then I would need to purchase a new lock cylinder and have it cut to match my keys (huge spend, even with Sewell).
The images show what I am referring to, the dark image is an attempt to take a picture of the inside of the hole. The last image is a drawing of the door frame from Sewell with part numbers. Is there a chance the door lock cylinder is somewhere inside the door panel?
I have had this slight rattle sound in roof driver side rear which comes randomly if road is bad or bumpy.. It doesnt bother me but would be nice if it wasnt there. I don't know what it is but seems like some wire or something inside in corner which shakes...
View 14 RepliesMy front door speakers are rattling. Instead of spending tons of money for replacement, i am thinking about refoaming it using the kit from [URL]....................
Is this hard?
Mine is 03 model btw.
Was replacing 168 bulbs tonight with led bulbs. Trunk went fine. I got a warm color that's a little whiter than stock and about twice as bright but 1/5th the power. I measured 49 ma vs 247 ma for the stock bulb. Then I went to replace the passenger door bulb. Put the led one in and it flickered on and off a few times and then went out. Figured it was a flaky loose connection. Check the contact and put the old bulb back in. Nothing. Checked the voltage at the connector. Nothing there either.
The fuse that controls that bulb has a bunch of other stuff on the same fuse which all still works, so unless there's a hidden fuse inside the door, then there's a wiring problem that just magically appeared now. I don't think there's a fancy controller. This light doesn't fade up or down and is not on a timer. It's directly controlled by the door switch and is instant on or off.
Our car was rear-ended (we had a great shop to the repairs and the car drives/looks like it did pre-accident). However, the navigation door magically stopped working now that we have the car back. The navigation screen still works fine, but the open/cose buttons will not make the door/lid open.
On other threads I have searched here, people have suggested this could be from the door being off-track (not the case here), a broken motor (could be the case), and/or a blown fuse (also could be the case).
What fuse I would need to check if it is in fact a fuse? I've looked at the fuse boxes in the engine bay (by the battery) and in the trunk, but all fuses look fine. Is there anywhere else I should look for a fuse before wasting a day at the dealer to diagnose/fix the problem?
I guess the roof needs adjustment since my driver side door won't close if the window is up all the way.
Checked the roof and found there is a larger gap on the passenger side than on the driver side. That causes the unevenness of the roof, I think.
1) Where to find a driver's lower fuse panel in cabin fuse cover/kick space left side, near brake?
2) I have a slight intermittent magic fingers kind of idle. I changed spark plugs, no diff, have been using Techron, timing belt replaced, etc.