I recently noticed that when I release the parking brake on our new 15 F-Sport it make a loud noise. It's hard to explain, but it kind of sounds like a spring being released with a clunking sound. (Sorry for the weird description).
When I press the brake to set it I am not pushing it all the way to the floor or forcing it at all. I am just using normal pressure to apply it.
When I press and hold the brake and lightly release the pressure. The brakes would make this loud squeal. This happens when the car on or off. Just found out today that if I have to stop really suddenly, it makes the same noise. I have an rx450h w 42k miles. Any thought?
View 11 RepliesReally enjoying my first Lexus RX350, but there seem to be some noise issues...
1. When shifting the gear, especially in the morning, from P to R, it is not smooth making some annoying noise. Is this normal?
2. Also, when releasing the break, there is some sort of a "thump" noise.
Don't think it is a big deal, but just wondering if these are considered normal.
Is it all the lexus rx350 had that noise? From the day I noticed hissing noise when I gentally press the brake pedal down and release it . And same noise can be heard when drive slowly and release gas pedal.
View 10 RepliesHad my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!
View 4 RepliesAccent 2006. When I start the car and start to drive, the car rock on the driver's side. I think it's the driver's rear. Then the feeling of a flat tire is felt but the tire seems to be ok. Occasionally hear a loud noise like from the exhaust and when I stop at a stop sign or stop lights and release the brake the car does not move till the accelerator is pressed and it rocks again and moves. It has 99000 km on it.
View 1 RepliesOur 2013 RX350 has a brake pedal that makes a pretty loud noise when it snaps back after you depress it a little harder and take your foot off. I complained to my SA, and they told me it's normal. It's not a big deal, but any other car I have owned, I have never noticed such a thing.
View 12 RepliesJust picked up a new 2014 rx fsport and 75% of the time I release the e-brake it has a loud clunk as if metal smashing metal. I tried releasing it really slow and it still does the same. The vehicle is parked on flat pavement. It is not a low click noise that I am used to but a loud clunk.
View 6 RepliesDrive a 2001 Dodge Intrepid ES with 77,000 miles on it. Took car to garage with loud noise. Its the parking brake. He tried to fix the problem. Didn't work. Told me I didn't need the parking brake. Never use it. And it is safe to do so. Mainly, makes noise in wet weather and in slowing down. Driven car like this for almost 5 years.
View 3 RepliesWhat is this metal on metal noise...you hear it the best around the 7-12 second mark...it is especially loud on cold start in the morning when you put the car in "drive" but don't move the car forward. It also is prevalent on hot days when you park the car outside and just start the car. The sound gets louder when you turn on the a/c during the hot day.
2010 2011 lexus engine noise metal noise - YouTube...
I got my 2011 Tiguan today but the manual is being shipped up so I don't have it yet. I got it home (I love it), and I stopped at my mailbox and engaged the parking brake. I had engaged it before and only had to let up the clutch and it would disengage. This time it stalled. I started it again. Pushed the parking brake button down. It would not release. Pulled it up. It would not release. Simultaneously pulled it up and put my foot on the brake, and it released. I know it's gotta be easier than this, but I don't know the trick yet I guess.
View 11 RepliesIt's a 2003, 2.0, rear disks. If I take it apart and manually compress the piston with that rotating clamp that Autozone lent me I can put it back together and use it 2 or 3 times and then it's too tight and I have to take it all apart again. I don't have the cable hooked up, I just move the lever with my hand or a screwdriver.
I'm a little irritated cause I replaced this caliper last year. I remember finding a good description of how this device worked and now I can't find it again.
The parking brake is both set and released with the parking brake foot pedal. I can't get it to release. If there is a release button or another way to release the parking brake??
View 6 RepliesThis morning I drove my car to see my dentist. When I parked I engaged the parking brake as I always do out of habit. However this time when I was done at the dentist and got in my car I tried to disengage the parking brake pedal and it wouldn't release. It kept going lower. Now I think its pretty much floored. I had to leave the car in the parking lot as it started to rain heavily. How to release the brake pedal. ? I think it must just be a stuck lever or gear thats preventing the release mechanism from working. Any pics or have dis-assembled a parking brake pedal on the phaeton before.
View 4 RepliesQuick background. 1+ years ago I'd sometimes get the "moo" when in reverse. It was intermittent and never enough or a persistent issue to address. Recently, no moo, but I noticed when I'd release the parking brake and move forward there'd be a minor hesitation and an audible thunk, not too pronounced, then it'd roll freely from then forward.
Replaced rear brakes a few weeks ago, noticed the right side parking brake arm doesn't reset as far free as the left. Pushing it 'home' by hand made a little thunk in the cable house up near where it bends towards the vehicle's midline. Brakes installed, and it spun freely by hand with perhaps only a very small amount of 'hiss' but not consistent for a full revolution, only periodically. Lubed both cables from the center console.
Last night installed parking brake return springs, set and released the parking brake a few times to see how it felt. Right side looks like it still does not return home 100% (maybe, 2-3mm away, same as before). Today, made a run to Napa. Got there fine, when leaving, drop the parking brake, and as I'm grabbing reverse I get a yellow dash light and a "check brake pads" warning. I drove about a block, pulled over, shut off engine, got underneath (no parking brake set) and the arm seemed to sit about where it should. I drove a few miles at low speed, pulled over (left engine running, set parking brake), checked temp of all rotors (both sides) with my finger, nothing noticeable. Drove a few more, repeated the above (engine running, brake set) and temps were still cool.
Got home, replaced fans. Started up to test fans, and the error isn't there now.
If it was going to throw an error I'd more likely expect it when leaving home, where I had cycled the parking brake handle multiple times. No error there, or en route to Napa. Leaving Napa, parking brake engaged only once, I got the error. Powering off and restarting, it was still there. Successive stops did not have the engine shut off. Once home, it cleared.
The '99 F250 has the parking brake release under the dash, way down low. While I was in the wrecking yard, I noticed many Excursions and Econolines have them on the left, by the parking brake. Whether one of those might work, if I installed it on my '99?
View 3 RepliesWhat is the procedure for adjusting the parking brake shoes on a 2011 Rx 350? How many clicks from tight should it be?
View 5 RepliesThe closest car wash is less than two miles from our home and we often bring the GX home directly from the car wash and park it in the garage. We've noticed that the parking brake remains applied when we start the GX the next morning, even though the foot pedal releases. Presumably, the parking brake components were wet from the car wash and enough rust/corrosion forms overnight so that the springs to release the brake can't overcome the 'stiction'.
The GX "squats and grunts" when we put it in gear, but doesn't move. Shifting into reverse solves the problem ... there's a loud 'pop' from the rear of the vehicle as the brake releases, the GX starts to move, but in reverse, which we quickly stop with the service brake, then we shift into forward and drive off ... did I mention that we back into our garage?
I may already have confessed that we are heavy parking brake users ... every time we park the vehicle, even if just temporarily while we step out of the vehicle to get the mail, etc. We use the parking brake so much that the cable stretches and every year our dealership has to re-tension.
The other day I backed out of my garage and didn't notice that the parking brake was still engaged. The car rolled out without a problem.
Only when I put it in drive did I realize that the parking brake was on, since the car didn't roll forward. I also got an audible alarm.
I've got a '13 GS 350 F-Sport and when the parking brake is set and you go to get out of the car it makes a real weird creaking noise. Its only when the parking brake is set, if i turn the auto parking brake off, it doesn't do it at all.
View 11 RepliesI always apply my parking brake whether im parked on an incline or not. Sometimes if I disengage the parking brake, and set my car in Drive on a flat surface, my car does not advance (I'm not pressing the gas). This tells me that my parking brake is sticking! If I apply the gas slowly, I hear the brakes "clunk" off and I finally get going.
View 4 Replies