I noticed a glare on the metal surface at the top of the dash in front of the Nav Screen. I have fabricated a cover out of "vinyl" from the fabric shop. I stuck it down with a few double backed tape patches.
View 14 RepliesThe surface of all four of my alloy wheels on my 2010 RX 350 are peeling. Why?
View 5 RepliesI have front dash rattle while going on the uneven road. Where exactly it came from. Where it might be?
View 3 RepliesWent to a meeting one evening last week with my 2010 Prius, everything working well. After the meeting we drove away and noticed that most of the dash display was "dark". Driving home and feeling a little gloom as I wondered what it might cost to fix the display problem.
I noticed the poster announcing the meeting we attended was laying on the dash and was pushed up to the display screen. I pulled the poster back an inch and the display came back on !! Pushed it forward and when it got within 1/2 inch of the display, it would blank out ??
It appears the dash display is some sort of bottom projection system to the display screen. Pushing anything up to the display screen blocks that bottom projection and blanks the screen.
So I'm doing a 24hour test drive on a 2014 Prius Two that may be replacing my 2007 Prius Touring (aka Package 5) that has a failing hybrid battery and so far I'm happy. I miss having a backup camera and premium audio but at $17000 I don't want to pay any more. Right now I just have a simple question... how do I show the energy monitor on the dash (top screen)? I even downloaded the manual but when I press the Display button on the steering wheel the only thing I can get to is "SETTINGS 3.11.16". I went into settings but didn't find anything that stood out... so I'm lost already...
View 11 RepliesMy 2012 RX350 now for over a year and like it a lot.........BUT.
There's seems to be a lot "road noise" that's transmitted back into the cabin, like driving over expansion joints on blacktop or rough road surface, is this normal?
I drove a 2000 RX300 for 100,000 miles and don't remember it being this noisy. Interior noise is great and quiet.
I got some coilovers installed last night, they are ksports. i have them on fairly low height as of now but i have noticed every time I hit bumps, I hear a kthunk (metal hitting metal noise) from my front driver side. is it from the coilover nuts itself or something wrong with my control arm? the sound ONLY comes from the front DRIVER side.
View 4 RepliesI replace my brake pads and rotors in the fall of 2015 with EBC parts. Now almost 13,000 miles later, I started hearing grinding and metal-on-metal contact in the front. So I went out and got PowerStop pads to replace the EBC (EBC had way too much brake dust). I took off the front wheels and noticed that the DF pads had about 1/32 left on them, ok I guess its time to change them out. Onto the PF pads, I find that there is almost no material left, in fact I could scrap off what was left of the material. I decided to do a rotation while I am at it and noticed that the rear brake pads on both sides look like I never used them!! Is it really that possible to have 2 stuck calipers, both on the rear at the same time?
View 2 RepliesWhat we have is a 2011 F-350 with the ambulance package (obviously) and it has started making a very annoying sound from the front end. It has been into two different Ford Dealerships and they have not been able to remedy this issue. What happens is, when we are backing and turning, the front end makes a bad metal on metal grinding noise. When going straight down the road no issue just turning while backing. I know this is an ambulance and has the ambulance package but I think from the cab forward should just be all ford right?
View 2 RepliesMy parents own a 2013 Elantra 4-door (sedan) and for the last few months it's been making a metal grind/squeak. Here are the following characteristics:
-It occurs only during acceleration from a full stop or low speed. It would then disappear if we drive it longer or get to 60km/h.
-We've diagnosed it to the front right wheel.
-It sounds like the squeak at you get when your break pads are almost used up - metal on metal grinding squeak
-It seems to be temperature related as the squeaking occurs less during cooler temperatures - it comes back once (I assume) the wheel / brake / rotors are sufficiently warm.
We have brought it to a mechanic and he did hear the squeak. He took of the pads and re-lubed (not on the braking side obviously). No change. BTW the pads are still very beefy and is the original pads that came with the car.
Searching online it seems this issue is fairly common and it seems to be the brake pads. Is this what's happening to my parents' car? If so is it as simple as replacing the brake pads with a different brand?
I have a question about my C Four with 16" wheels. When the steering wheel goes all the way to a stop there is a thunk that feels like metal on metal. It is like there is no rubber bump stops. If this is normal. I am used to cars that have a nice cushioned bump at the steering limits.
View 1 Replies2010 Prius
The dash display area has a laminate covering it and it is starting to release from the surface of the display. Dealer says that they have to take the entire dash out to look at it and fix it. I am somewhat apprehensive about them taking the dash out and putting it back for a cosmetic item.
Honda Accord 2005 ... Just bought a new used car. All seems ok, but I have two problems.
(1) when not moving, i have slop in the steering and I can hear metal on metal contact when I turn the steering wheel. I pulled the tire and with basically no force I can move the rotor back and forth by hand. what it is and how to fix it?
(2) when braking, it appears that the front left pad sticks. Pads are not excessively worn down. Can't figure out how to get to the caliper pins ( thought they might be sticking).
Could the two be related?
Super excited still just picked up a 13 cpo fsport awd, obsidian and cabernet. Playing with the set up and seeing some of the posts on here a couple questions I had.
#1. There's a DIY thread for changing the puddle light. I couldn't find in the settings how to turn those lights on. When I lock the doors or unlock, they don't turn on.
#2. In the phone settings, there's an option to show contact pictures for the caller ID. I tried a couple calls, but the picture doesn't show on the dash screen, but does on my phone.
I commute 180 miles a day, 6 days a week. I noticed metal on metal grinding noise(more noticeable) at high speed above 75mph especially on asphalt road. I'm sure noise is there at low speed but not enough to notice. My car has 50,000 miles. Tires? Electric motor?
View 7 RepliesMy Elantra's HVAC fan has always been a quiet thing, even on 3.....we won't mention level 4 and the fact it sounds like a 747 at takeoff.
I kid you not, the very evening I hit 60,000 miles and the general warranty expired, the blower motor started making noise like it was throwing a bearing and definitely sounded like some light metal-on-metal rubbing. After I became irritated at this, the noise went away and didn't come back until just a few weeks ago. I could make it stop by smacking on the bottom of the fan assembly a few times but I want a more permanent solution.
Tonight I dropped the blower out which was stupid easy except for the fact you're upside down in the dark with your head in a hole. But three screws and an electrical connector later, I dropped the assembly to find no serviceable components. I mentioned this to friend of mine who's into Volvos suggested spraying some lithium grease on the hub of the blower and letting it run long enough to quiet it down. I'll do this over the next few days and report back but part of me thinks a new blower may be in my future.
At 75K my passenger side rear brakes were making metal on metal sound. I was really surprised as I have always learned that the front brakes take 80% of load and they always go out before the backs. So I took the wheel off and sure enough the pads were metal on metal. Changed everything out. (new rotors). I then went over to the driver side rear brake. Looks brand new. The pistons were barely out. I figured this caliper is bad. (I haven't change yet)
When I drive I can hear a very faint metal on metal sound when I brake. VERY FAINT. So with 75K miles on I figure the front brakes are due. Today I took the wheels off and inspected them. Tons of pad left on both of them. If I didn't know better I would say a brake job had been done very recently. (I've owned the car new so I know they have not had a brake job) However after reading many articles on this site I found a thread where one user said he was changing his front brakes for the first time with 110K on them and the pads still had 10K left in them. So the fact that my front pads are still pristine at 75K may not be a big deal (or not as big as I thought. Also I am not hard on brakes.)
However I'm not sure what is going on. Why would the passenger rear brake be metal on metal at 75K and the three other pads are like new. Is the passenger rear the only one working (or working much harder than the others) meaning the other three are bad? Or is the rear passenger bad and the other three are good? I have a working knowledge of cars but I am by no means a mechanic.
I have a 2011 Prius with about 32K miles on it. I've been hearing light metal on metal grinding noise for a few days now. So I decided to take it to a stealership and they told me my ceramic pads and brake rotors both need to be replaced for all 4 wheels. I thought Prius brakes don't need to be replaced for 100K miles.
View 7 RepliesI own a 2010 Toyota Prius that recently developed a metal-on-metal whining scraping sound when moving. It does not make sound when the vehicle is stationary, and it's intermittent - which makes me discount the rock-in-disc-rotor idea (not eliminate it, mind you). It's quite loud when it occurs, able to hear it over the stereo. Luckily I was near work at the time, so I went there - but the shop can't even look at it until Monday evening - so I am a bit panicked.
View 8 RepliesI have encountered a strange noise from my car. The sound is similar to a metal rotating sound. It may be coming from the front right wheel.
I cannot hear it on the freeway. I would say that I can hear it quite frequently at slower speeds. Sometimes It would go away momentarily.
I tried turning the wheel left to right to see if that had an effect at slower/higher speeds, doesn't seem related, could be wrong. Currently I am thinking it could be my wheel bearing...
I have a 2012 Elantra with 21000 miles on it. It runs well but in the last month or so it has started to make a strange noise when first accelerating. I would describe the noise as touching a fork to a metal fan...kind a "zzziiiinnnkkkk" sound, I guess. It only happens when the car has been sitting for a while and only on the first acceleration, usually in first, second, and third gear after which it immediately goes away and doesn't happen again until the next time we drive it. It seems like it would be related to the transmission except the sound is too tinny for it to be the gears. It sounds more like sheet metal making that sound. I took it to the dealer but they said they couldn't make it make the sound, which is crazy because it does it EVERY time we drive it.
View 14 Replies