Lexus RX 2010-15 :: How To Change License Plate Bulbs To LEDs
Jul 16, 2014
I wanted to change my license plate bulbs to LED's. Can't figure out how to get to them. The book says have the dealer replace these bulbs if burnt out. I Always like to try to do things myself.
View 7 Replies
Advertisement
How do I change my license plate bulbs in a 2010 ES350? I bought some 194 JDM Astar LEDs. I took off liner and changed backup bulbs but can't figure out how to change license plate bulbs.
View 4 Replies
How to change license plate bulbs? The little clear covers dont seem to pop off ........
View 3 Replies
How to change the license plate light bulb for lexus rx 350 2010.
View 4 Replies
I'm trying to change my license plate bulbs to LED but cant figure out how get to the bulb. I've already removed the carpeted cover but cant seem to figure out how to get the bulb out..... 2007 ES350....
View 3 Replies
I tried doing a search on how to replace the License plate LED bulbs...
Looking for pictures or instructions on how to replace them...
View 2 Replies
How do I change my license plate bulbs? I can't seem to get the plastic covers to pop off without worrying about breaking something. Even reading about people saying the puddle lights were hard to change, i did mines in 10 minutes in the dark with a small flashlight lol.
This was a lot easier old my old g37/350z ....
View 3 Replies
I ordered an LED interior package from Deautokey and they also came with license plate LEDs. The interior looks great, the license plates looked great except for one thing, the right side was slightly yellower than the left. So I contacted Deautokey and they sent me two new ones:
These are identical to the original LEDs except in the old ones the squares are arranged in a diamond pattern but I don't think that matters.
Tonight, I was replacing the right side LED hoping that replacing one is all I had to do to match colors but in order to see better I kept the plate lights on. Well when I went to pull out the housing I forgot that they were still on and pulled it out anyways, there may have been a noise when that happened but I forgot.
I put the new one in, turned the plate lights back on and found that it was dim, I rotated it and same look. I tried the second replacement, equally dim, so I thought "okay, I'll just give up and put the old ones in." Did that and they are now these ones became dim!
What happened!? Did pulling it out while it was still on (only did it that first time BTW) mess something up? Did the new ones being in there mess something up? There is no warning light or message in my instrument cluster.
View 24 Replies
Combo of interior and internal LED bulbs. What particular bulb type to get for my MAP lights and license plate lights.
This was suggested by V-Leds for my license plate... [URL] ..... What do you think?
They did not suggest any for the MAP light, I'm thinking these are the ones... [URL] ......
View 2 Replies
Any LED I can throw in the footwells / license plate area that won't throw a code? I'm using the ones from superbrightleds.
They worked everywhere except the license plate and the footwells. Everytime I get in my car I have to see (check license plate lights!) and a bulb out icon.
View 10 Replies
So I took my GTI in for my 10k service and to have them fix the wastegate rattle and the subframe shifting. They fixed the wastegate by installing the clip but didn't have the shims in stock for the subframe so I need to go back anyway, but I'd really like to fix my license plate lights before then.
Is there a possibility the tech could have accidentally unplugged a cable for the lights when he was rotating the tires or messing with the wastegate, etc? Maybe a blown fuse? I'm running LEDs and I already tried putting the incandescent bulbs back in but they don't work either.
View 5 Replies
I have an intermittent error that comes on most of the time I have my headlights on, but sometimes goes off and comes back while I am driving. It shows me the bulb out light, and says on the screen "Number plate Check license plate lighting!" I have never touched the oem factory bulbs on the license plates, and if i get out and look at the plate, both lights are on over the plate.
The only change I have made was about a year ago, I installed an LED bulb in the trunk, and ran a second OEM trunk light in the left side and installed an LED bulb in that too, tee'd off the factory trunk light housing. But like I said, that was 1 year and 30,000 miles ago, and my bulb our error for the license plate has only just started, so I doubt they are related.
View 3 Replies
I am trying to swap out my stock license plate bulbs on a 2012 Prius.
After getting to the bulb socket holding thing, I have read that you're supposed to turn it 1/4 counterclockwise and pull but mine is stuck and won't turn either way.
View 7 Replies
After going through the car wash several times now in my 2010 RX 350, my front license plate has been bent in all different directions. Car wash guys say it's due to not having a full plate holder, where as 4 screws secure the plate vs. only the top 2 as we have. Any plate holder from another vehicle that I might adapt to overcome this?
View 14 Replies
I have a 2010 RX450h and live in Minnesota where it is hard to hand wash my car. The darn car washes tend to catch the front of my license plate frame and bend it and the license. I have tried several different plate frames and none worked. Minnesota plates are now the thin, non-stamped plates so they are very flimsy.
I even tried putting a plastic plate behind the license to make it more rigid but that failed too.
View 1 Replies
Replacing license plate bulb on a 3rd gen rx? I tried taking off the interior lining on the rear hatch but no luck. There's access covers for taillight & reverse, but none for license plate light. I also tried "popping" out the plate light cover right above the license plate... don't think they are designed to be popped out.
View 3 Replies
how the chrome trim above the rear license plate is removed?
View 4 Replies
One of my light bulbs for the rear license plate light is out.
what kind of light bulb I need to get?
View 8 Replies
My Pathfinder has the license palate in the middle/center of the hatchback door, with one light on the left and one on the right. I cannot figure out how to change the bulbs and my manual is no dice; it shows the process for a different location of the plate on the door, maybe a different version of my year model.
View 6 Replies
For a few weeks now I noticed my stock license plate bulbs started to act strange. My left one is about half burned out, and the right one started to flicker and burned out entirely.
So.. Easy fix right? I bought 4-smd led lights to replace the burnt out ones and as soon as I installed them they worked perfectly! But about twenty minutes later .. The right one burned out. And the left one is dim.
Is there something wrong with the wire? what can I do?
View 6 Replies
I'm in the process of replacing license plate bulbs. I broke the old housing for one of the bulbs so I bought new LED lights on eBay and they came with the housing. The problem is, I can't get the cover to stay clipped in to the tailgate. How to get the lights to stay in? What am I doing wrong?
View 7 Replies