When I use Side view and backup camera , the screen shows SYSTEM NOT READY. After this issue, I go to service menu, I found check for HANDLE and DEST. Any solution for HANDLE and DEST check in service menu? Is there anyway to upgrade firmware of INTUITIVE PARKING ASSIST ECU?
During driving, some buttons are not working. Sometimes work and sometimes doesn't work!
I just noticed today that my backup camera now shows part of the rear bumper and perhaps some of the chrome. There's also a strange, small, somewhat circular thing in the upper right corner of the screen. With my Matador Red exterior, I'm sure I would have noticed it before today on the backup camera.
View 8 Replies2001 Mazda Protege 2.0L
In California, if my OBC11 reader shows, "Cat Not Ready" and all other systems are "Ready" will it pass the smog test for an enhanced area?
In other words, do all systems need to show, "Ready" or am I allowed one or two "Not Ready"?
I do not have CEL on.
Everything was working fine until I started messing with camera settings in the service menu today . Now when I shift into reverse, it says "system not ready". Will not let me parallel park or reverse park now. I tried to reset the settings but maybe I don't know how to "save" settings.
View 5 RepliesMy wife has a 2010 camry le, and I am interested in possibly getting a higher end backup camera that works with a rear view mirror (the car does not have a nav screen).
I hear some of these cameras are infrared as well? It would be cool if I could use a Toyota system (OEM). A mirror like this would be perfect:
I got the ivic system installed in my car today and I am pleased thus far with the little bit that I have played with it. The only problem that I have is my back up camera is not cutting on. Why?
View 2 RepliesI installed rvc couple of months ago. When I put in reverse, only shows straight yellow lines on screen. Is there any way to activate to lines turn with steering wheel (like cars with parking sensors)? I was wondering if there is Vag_com trick available for this option.
View 7 RepliesMy navigation system changed on my 2010 LS460. Suddenly I have dots showing the roads I have traveled along whether I am using the navigation system or not. Also, when I input an address and it gives me 3 options (Quick, Alternate etc) the 3 options are greyed out and it will only go to Quick.
View 4 RepliesI bought a 2011 F250 with nav and backup camera. the backup camera only shows in the rear view mirror and NOT in the nav screen. How to program it to show in the nav screen also?
View 7 RepliesI have a 2010 Gx460. The rear door has now become locked shut and will not unlock. When I hit the unlock button on the door all I get is flashers with a few beeps. What can I do?
View 1 RepliesWhere is the camera for the back-up screen located? Occasionally we have gotten splashed and when I put the car in reverse, it is very difficult to see because the splashes are obscuring the view. If I knew the location of the camera, I could try to clean it.
By the way, had my first opportunity to drive our 450h In the snow. The snow was coming down hard, it was night time, back roads in New England, taking our daughter back to boarding school. The roads were very dark, not yet plowed. I was so focused on seeing the road ahead that I didn't even notice how steady the car had been (no skidding or 'fish-tailing') until we got back to our hotel.
All of the backup camera systems I have seen (which are in Chevys) have superimposed guidelines on the camera view to align the vehicle into the proper spot between the parking lot markings. I road tested a 2014 RX350 with Nav system (with backup camera) the other day and it did not have these guidelines. It just showed a nice rear view picture but offered no assistance in aiming or aligning the vehicle when backing into the parking spot.
Is it just possible the guidelines were turned off in the Nav menu somehow? On the other brand cars, the guidelines actually curve as the steering wheel is turned -so you can use those line to perfectly back into a space. It would be a big oversight IMO if Lexus didn't build this guidance feature into their backup system.
My backup camera stopped turning on when I put the car in reverse. Why? I'm thinking it might be a fuse issue, but I can seem to figure out which fuse from the information in the manual.
View 9 RepliesI never noticed that the back up camera screen is purely black and white? or is there a setting somewhere to have the screen displayed in full color?
View 5 RepliesI got in my car this morning to drop my sister off to school and when I put the RX in reverse nothing happened for a second or two and then all of a sudden it jerked back. I continued to reverse off the driveway thinking what the heck just happened. When I put the car in drive the reverse camera stayed on as I drove off.
When I noticed this, I pulled over to the side and put the RX back in park and turned it off. I then turned it back on and the area on the dash that shows what gear your in, never turned on. My sister was getting late so I dropped her off and came home.
I turned the car off and waited 30 seconds before turning it back on. This time the reverse camera didn't engage in reverse and the small screen that displays what gear your in, displayed no image. Then a few seconds after that, the check engine light came on and so did the symbol of a car and squiggly lines under it. My RX350 is a 2010, and has just under 85k.
Went to the market, and my 2010 Prius II with 56K miles won't start.
Display works with the "Hybrid System Warning" message, but nothing else works.
I just got back from being gone awhile to find that my rear view camera has stopped working. I get a message that says "rear view camera system is currently unavailable" when I put the car in reverse.
The camera does come out like it should so I'm guessing it's something to do with wiring maybe a short or something. I have a 2014 RCD-510 with the camera input...
The 2010 Prius in our garage would not start today. I tried jump starting it with the 12 volt in our van, but the light on our smart jumper cables would not light up on the Prius side even when I switched them around. I followed the manual's five minutes revving and such, but the ready light does not come on in the Prius. There is enough power for the inside lights to come on, but they are dimmed. I'm thinking we left the lights on in the back seat dome area based on what my daughter told me. The car has not been driven for about 65 hours.
View 14 RepliesI have a 2011 regular cab XL, and I just installed a Kenwood DDX770 that has a backup camera connection. I am installing an aftermarket camera. I would like to use the wire from the stereo and connect it to the steering column wire for reverse, but can't seem to locate it. I read other places that it is a black wire with a pink stripe, but I can't find that color under the dash.
View 3 RepliesSo I use my car as a "work truck" and part of my duties involves stopping at a number of houses(8-12) for 5-15 min at a time and then driving 2-6 miles to the next house.
View 11 RepliesI am still getting used to my new Prius, just have a little over 700 miles on it. I recently noticed something very strange with the car - if I am in "Ready" with ICE off, and I put it in drive and release the brakes, but do not press the accelerator, the car will slowly move forward, just like a regular auto transmission. After about 1 second the speed will reach about 2 mph and I can feel a very small rumble in the cabin and a very light vibration on the steering wheel. It sounds like a very low frequency bass, and it lasts for less than a second.
It goes away and the car continues to accelerate up to about 5mph (the accelerator is still not pressed). This sound is almost unnoticeable, and it does not happen if I release the brake and immediately press the accelerator, it only happens while creeping forward very slowly. I was able to make this sound/vibration last longer by "riding" the breaks and keeping the speed around 1-2 mph, it is very faint and I have really listen to it. To me I believe it is caused by some resonance/harmonics in MG2 turning at extremely low RPM, at least it "feels" somewhat "electric"...