I have read that cleaning or replacing the switch that adjusts the outside rear view mirror's will get rid of the erratic operation of these. Mine sometimes works and sometimes doesn't. How do I get the switch out of that panel? It doesn't look like the panel will pop out from the front.
View 2 RepliesI just bought an RX 330 recently and the mirror on the driver side is not working. Not even when I tried to do some minor adjustment to the mirror before I drive the car. I do not hear any motor running or any sound when I push on the mirror adjustment button (and yes, I did put the switch to the left). So does this mean the motor that controlling the mirror is out...or dead? Do I need to replace the motor or the whole mirror--the motor and frames as well? If I do need to replace this, does it considered as a "mechanical break down" since it's the motor that is failing?
View 14 RepliesTried to open the rear hatch with the key. No lights flashing. No beep.... Dead.
Tried to open it with the switch under the steering wheel. No lights flashing. No beep.... Dead.
I have an appointment at Lexus but this sounds like warranty stuff to me -- sudden death of rear hatch? Lexus informed me there is no manual way to open the trunk. Can I somehow manually open the trunk?
Awhile back I did get my battery replaced and I did reset my windows so they could be used from the driver side panel. As of now, I can roll down all of them from the driver side except for the passenger side rear (window diagonal from driver). The window does roll down from the door itself so the window isn't broken. The light on the driver window switch is lit green, not blinking. However, the light on the window switch on the passenger door is NOT lit and not blinking either. And yes, I did make sure the window lock was not on.
Could the switch, either passenger or driver door, be bad? Should the battery be disconnected and reconnected??
All work yesterday. This morning, windows can't be rolled down from all controls. Power lock works only from passenger side.
View 1 RepliesSo, I'm thinking of converting my RX330 power steering to be all electric, based on the RX 400h power steering system. I know the 400h operates the power steering on a 30V - 50V circuit but I need the wiring diagram of the 400h power steering circuit to know what additional components I'll need to do the conversion.
Question: Why am I doing this?
Answer: Save on fuel economy and power steering maintenance.
We own a 2004 rx330 and a odd thing occurs on warm days. That power liftgate will not open or close with the power buttons. It will open about 2 inches and close. When completely open, the power button will not close it. Works fine on mild weather days.
View 4 RepliesI have a 04 RX330 AWD and I noticed yesterday when I opened the rear door, it didn't stay open when it reached the top. As soon as the rear door reach the top position, it came back down and closed the door. First, I thought I pressed the button to close but when I tried a few more times, it was keep happening. What I need to do?
View 9 RepliesI have a 2006 RX 330 with 116,000 miles. I noticed that i had a leak and the power steering oil level was low. I went under the car and looks like the power steering hose is leaking. The dealer wants $352 for hose and $325 for labor. I called auto parts stores and they say its a dealer item only. Someone told me I could have a hose company rebuild it for a lot less.
View 5 RepliesI bought my 2012 RX 350 April 2012. I noticed that the rear mirror had like melting or warp look. Then the side door panel and in back -wing of car (spooler?) had some ripples lines. I went to dealer first they said they would order parts for mirror and side panel (this was fix awhile back sept). but the have to get factory inspector to come out and inspect car for the spooler part.
I dropped my car off because the manager says he needs to look car himself before determining anything. He told me he thinks I parked my car near high efficiency windows and had reflected and caused the melting or warp or ripple on my car.
I have a 2005 RX 330 with about 100k on it. The A/C does not keep the cabin cool. If you turn the fan up it will keep it cooler. I took it back to the dealer and they say there is nothing wrong with it. They did recharge it but it did nothing. You have to keep the fan turned up to just stay comfortable. I have had service loaners and I have to keep turning the temp up or it gets too cold.
View 14 RepliesI have a 2006 RX330 AWD. I took it to get inspected and was told I had a bad O2 Sensor.
Are they easy to replace? What should the average cost be? I was also looking for the part number. I was told that "Bank 2 Sensor 1" failed. I was looking for the part but I am not sure I found the correct part.
I was also told that the front inner and outer Tie Rod needs replaced along with both rear wheel bearings. I found the parts for the tie rod but not sure about the rear wheel bearings. Wondering if i need to get just the wheel bearing or if i need the wheel bearing and hub assembly also.
It seems like my wife's 2006 RX330 does not get as cold as it used to. At times, it will even blow warm and humid air, even though it is set to max cold, although this is intermittent, which to me, creates a harder problem to diagnose.
For example, if I put the AC on Auto, at 70 degrees, it never gets cold enough for the fan to drop below the Medium fan setting. To me 70, is not that cold, and it should be able to reach this temperature, and then slow the fan down to just maintain the temperature. I can even put the system on Max AC, and it the fan blows at the High setting, but it never gets really cold.
Something weird started happening post my oil change yesterday. AC is working only at LO temp and it blows hot air even at 65. AC light stays on but it starts blowing hot air at any other setting then LO..
View 3 RepliesHow to reset/re-program my original key. It all started when the plastic casing of the key broke off and tried to use the original spare key wallet type with transponder and key dont go all the way in the ignition and key get stuck in one position but manage to get it out. Tried to put the broken one with the transponder close to it and will not start. Luckily i still have another original key that works. I have change the battery of the broken one and fabricated new housing made of brass and have tried the remote and it doesnt work too.
View 12 RepliesMy 2005 RX330 has run fine for all 45000 miles to date. One exception is that there is a high pitched hum that becomes noticeable once the car reaches 30 mph and continues to increase pitch until about 45mph. The hum seems to disappear when going faster than 45. If you cruise on a quiet street at 30mph the hum will stay steady if you maintain speed. The hum will increase if you accelerate.
But... if you take your foot off the gas pedal the hum instantly stops. Put your foot back on the pedal and it instantly starts. You can almost "play a song" by taking your foot off and on the pedal. Lexus service clearly heard the sound during a test drive, but could not figure it out.
Hard to fix? Only happens when going under 5 mph either in slow traffic or slowing down to park in parking spot or just stopping the car. Doesn't happen at high speeds. It's like I'm driving on snow or ice or wet pavement but there is dry pavement. Brake pads and rotors were cleaned with no success. Guessing that a sensor is dirty or broken or such.
View 4 RepliesI have a 2004 RX330 that all of a sudden had the SRS warning light come on as well as the passenger airbag OFF light being constantly lit up even when someone is sitting in the passenger seat. I put the SRS system in diagnostics mode with a jumper clip to determine I am receiving a DTC of 23. Documentation I have found for this online states for Lexus it is a occupancy classification system issue which I know means it's something on the passenger side.
This seems like it would be related to the occupant seat sensor itself which I am first of all wondering if it is bypassed like the BMW guys have done on their cars when this issue happens.
Secondly, I'm wondering with this specific code of 23 could it be anything other than the seat/weight sensor? My passenger seat belt has tons of slack and doesn't retract as it should so I'm thinking maybe pre-tensioner sensor but not sure because it also seems to stick when trying to unbuckle it as well which leads me to believe it could be the fastener sensor.
I feel very unsafe having any passengers in the vehicle right now and the car is well beyond its warranty of course so bringing it in to the dealer is really a last resort option for me since I know at minimum they'll charge $1000 for SRS wiring issues based on what I've read.
How to change the bulb on the rx330 fog lights. It doesn't say it in the manual.
View 14 RepliesHow to remove power mirror switch 1998 f150, and where to buy if can't be cleaned up to work?
View 1 RepliesInstalled Kenwood DDX7701HD unit and I have lost right side speakers. Used Metra Axxess TYTO-1 harness along with ASWC-1. Also had bad battery cell and replaced battery. I get plenty of sound from drivers area but when I adjust balance to right there is no sound at all there. At this point my ASWC-1 cycles through but isn't recognizing radio. That issue can wait unless it is part of this issue.
View 4 Replies