Lexus RX 2004-09 :: HID Headlight Assembly Replacement?
Nov 13, 2015
My headlights suffered from the dreaded condensation problem. I brought them to Lexus after getting the warranty enhancement paperwork and had them replaced. Shortly after the passenger side wheel cover was ripped off after getting caught on some ice during a storm. It was very shortly after that that condensation begin appearing in my passenger side headlight.
At that point I was unaware that the wheel well cover had been ripped off. I brought it back to Lexus to have it looked at since I only had the headlight replaced a few weeks before. I was told it would be at a cost of $2,500 to replace with an additional $400 for the wheel well cover. Needless to say, I did not have the work done that day. While I was waiting them for them to finish the paperwork I bought the wheel well cover for $50 online but since then I've had difficulty locating the headlight.
I brought it to my mechanic and he was unable to find the headlight as well. I have a 2009 rx350 with HID AFS headlights. I have looked on ebay, Amazon and just through the internet to see what I could find but I'm finding only halogen headlights. Most of what I'm seeing on eBay are for non-adaptive lights that are damaged.
View 2 Replies
Advertisement
The drivers side headlight assembly on my 2008 Prius has moisture in it. I have 52,000 miles on the car, so I do not think it is covered under warranty. What / how can you replace the headlight assembly?
View 7 Replies
I'm trying to replace my dads 2007 Camry XLE japan built headlight assembly because his are insanely oxidized. Besides OEM's and CAPA's, what else are there? Any good aftermarket headlight assembly and achieve great results?
View 8 Replies
I am in need of replacing the passenger side Front Headlight assembly. I was wondering, how to assemble it outside of a repair shop. I was also looking to possibly get the part number so I can make sure I am purchasing the correct product for my 2012 VW Passat SE.
View 8 Replies
I have a 2001 Excursion and I need to replace my headlight assembly. What is the difficulty level of replacement? Any recommended assembly they would suggest that throws out some great light?
View 14 Replies
One of my headlight is burned out and I would like to replace. I don't want to go with OEM. Looking something better and brighter. 2008 GX....
View 1 Replies
Recently my 05 RX330 had the driver side low beam bulb go out. I took it to a few places and they said take it to the dealership as they have special tools to change it. Of course I took it there and they were ready to charge me an arm and a leg to get 1 little bulb replaced. My question is do you have recommendations as to what I should do to get this fixed and not have my wallet get destroyed?
View 8 Replies
Is it hard to remove the headlamp assembly. I am only asking because i am considering purchasing smoked/blackened headlamps and tailights on ebay.
View 14 Replies
So car not turning over after replacing (right side) headlight assembly. Was turning over prior. Replaced the battery, same result.
View 4 Replies
How to access the plugin for the 3rd brake light, cant seem to find it from the top, do I need to remove the headliner?
View 2 Replies
Just replaced my bulbs with the Garax 6000k and they look good but now my check engine light and VSC light is on. Problem started after changing bulbs? My pops said it should go away but we're not sure. Is there a way to reset it and get rid of the lights?
View 3 Replies
One of the small bulbs in the corner of the headlight assembly is burned out. does any one know how to replace it?
View 1 Replies
I finally purchased an RX30 for my wife. The Halogen headlight isn't all that bad, but I am used to drive with HID. Therefore, I am buying HID kits for my RX350 Headlight. Whenever it is shipped to me, I will take pictures of the progress.
1/ Link to buy HID kits, OEM is 55W (no need for extra Hardnes) and 6000k is common factory color.
This will come with everything needed to convert your light bulbs into HID white colors. For more Colors please check out the guide on the website.
I recommend this site, because I have used it, purchased it, and have had no problem with it so far.
2/ According to Manual Book
****Low Beam is H11****
Fog Lights is *****H11*****
****High Beam is H9*****
**** 55W *****
3/ The installation should be Relatively Easy
--Take off engine plastic cover on both side--
--Access the Light Bulb--
--Use the OEM Plugs into the Ballasts input of the HID KID--
--Mount the Ballasts at a convenience locations, I had great success with Plastic ties--
--There is a Plugs output from the Ballast, Plug it into the HID Bulbs--
*****If the lights don't turn on after installation, try to switch Polary, or turn the original plugs around
****** Halogen doesn't care about Polary, but HID Ballast does.
--Install the HID Bulbs the same as regular Halogen Bulb--
--Check the HID carefully, make sure that both will work--
First time Installer common trouble shoots.
1/ Only 1 light is working......Switching the bulbs, or Polary will solve your problem
2/ Lights common for a short time then turn off, until engine restart......You will need the Hardness Relay, which should not occur in our car. The factory hardness is good for 55W
3/ Bulb Visually contain Contaminants, or White particle inside.......HID Bulbs has Special Salt in it, which is required for a longer life in the Bulbs. This is the way the bulbs are.
View 13 Replies
I can't remove the retaining clip to replace the passenger's side low beam headlight bulb. I was able to, with some difficulty, replace the driver's side but space is tighter on the passenger side.
View 1 Replies
I can see where there is a 1/4 inch post that if turned will push the assembly out, but i can only get it to come out about 1 inch. Is there something else that has to be released ?
View 2 Replies
how to replace the front Highlight.
how to replace my head light, on the passenger side.
View 14 Replies
New owner of a 2000 Passat. The headlights are dingy on the inside and I would like to be able to clean them. How I can get to the inside of the headlight assembly? Can't stand the look of them like this!
View 13 Replies
I've removed 3 bolts ( Headlight assembly removal)and loosened the number cover to be gridlocked by something I cannot see or just a bit more friction than the amount of force I'm willing to give for fear of breaking something.
View 9 Replies
Just took my 2007 GX-470 with 133,000 miles in for an oil change and the tech told me that my rack assembly is leaking and needs to be replaced to the tune of a little over $1000.
Is this something fairly common? I haven't been able to find a whole lot of information on this forum pointing to problem with GXs..
View 2 Replies
Several weeks ago someone backed into my '97 RAV4 in a parking lot. Body shop charged around $900 for the repair (estimate indicates labor for both headlights, but doesn't look like they replaced them). This afternoon one of the low beam headlights burned out. I went to change both sides just to be safe. On both headlight assemblies, grasping the wire assemblies to the low beam bulbs, the headlight assembly on both the left and right side is loose within its housing. I've changed the bulbs in the past, this is something new. Take it back to the body shop? What happened????
View 7 Replies
A few weeks ago my 2010 Prius was involved in a minor front end collision. The car has since been repaired. Today I noticed that the passenger side headlight assembly (which was replaced) doesn't seem to fit quite right. There is a small gap between the assembly and the body panel at the most extreme point on the side of the car. Is this just a cosmetic issue, or could water seep in at the location and cause internal damage?
View 1 Replies
