My wife has a 2008 RX350. I don't recall this vehicle having a single warning chime whenever you install/remove the key from the ignition. I can't find anything in the manual or on google. Is this normal or does it indicate a problem?
View 1 RepliesI bought this second hand 2008 Prius some few months ago. I can't start my 2008 Prius without inserting the key into the slot. I want to start the car with the key in my body, how do i do it? I have changed the fob battery, the key is doing every other thing, but i must insert it into the slot before i can the start the car
View 19 RepliesI was trying to change my disk from 12.1 to 13.1 in my 2008 GS 350 AWD. so I ejected the disk via the screen, took it out and put the new one in. Started making a continuous clicking sound and then took the disk half-way out then in then totally out. Ok, maybe a bad disk so I tried to put 12.1 back in and same thing happened. Ok now I tired the original disk that came with the car. Same thing. Very odd. It worked fine up until the second I took it off.
View 14 RepliesWhen the car is off and door is open the warning chime is going off nonstop. I just got it back from mechanic and I don't ever remember it being this bad but can't for the life of me remember what I did to disable it before.
View 2 RepliesI just bought a ceritifed pre-owned 2010 RX 450h. I love it, but a couple of questions as I get to know the car.
1) The rain sensor seems to not work. I set the wipers to what on another car would be "intermittent" but the wipers never come on. Am I missing something, am I a dummy? Or should I just get the dealer to replace the sensor?
2) Any way to turn off the seatbelt warning chime?
Everytime I open the door to get out of my 08 LS460 the warning bell rings incessantly.
The only thing I can think of is that I'm usually in a parking garage and the lights are on due to the auto-feature on the lights. But, I think sometimes it rings even though the lights aren't on.
Sometimes you open the door but don't jump right out of the car. Is there anyway to disable this ringing bell?
I have a 14 IS 350. How do I set the lane departure to beep or chime when I'm getting ready to get in another lane and a car is in that lane? I know it beeps when I am reversing and a car is passing.
View 2 RepliesI stored my Camry over the winter, and it didn't do this before being stored.
Whenever I drive the car, park, remove the key, then open the door, it makes a single "ding" sound then stops. This has happened every time that I can remember.
Is this a warning sound for something? The tires are all filled, the bulbs are all fine... Very confused. The headlights have been in the "Auto" and "DRL Off" positions with no change in the chime, I think.
Whats going on with my 2002 SC430. Every time someone (valet) puts the key in the door to unlock it, the car completely shuts down. The remote won't work. The only way to get it going again is to have the door popped open. This sets off the alarm but once the key is in the ignition and started, it's all good. What is going on and how to correct this?
View 10 Replies2008 RX350 with 52k mile .... It's getting cold even in Atlanta. So I thought the warning light was perfectly normal..
Checked the tire pressure and was around 31psi, so pumped to 35 ish after running 10 min or so thinking it should be good enough. After driving back home, the lights are still on.
I double checked tire pressures and they are between 35 and 35.5 psi still. So I reset the warning light, and it the light won't go away. I think the owner's manual said, if it blinks for one min and stays on, then there's a problem in the sensor.
When I start, it blinks once, then stays on.
If I reset it, it blinks three times and stays on.
What I should do next? I did replace tires about a year ago at the local tire shop, but I don't think it was their fault, as I think the warning light worked fine last winter.
How do I disable the chime (2008 F150) that sounds when the key is in the ignition and the door is open? I'd like to keep the chime that sounds when the lights are left on and the door is open. Is it possible to accomplish both objectives?
And, on the off chance that someone from Ford ever looks at these forums: It would sure be nice if you designed the audible warnings with either a timer in the circuit (so it would sound for a few seconds and then stop); or, provide a cancel button for the chime (as is common in commercial and military aircraft).
Recently the key chime will not stop when I remove the ignition key. It doesn't do it all the time but is getting more frequent. Usually I can reinsert the key and remove it once or twice and it will stop . How to remedy this issue? Is there something inside the ignition that can be repaired or am I looking at replacing the entire thing?
View 14 RepliesI guess not ALL of the time, but pretty often when I turn off my truck and remove the key from the ignition, I get the "key is in the ignition" chime, and I'm not allowed to lock my truck.
View 2 Repliesi need to know if i can remove the light bulb for the flat tire light, it has gotten colder here in Phoenix, AZ and i dont need the damn bulb on. can i remove the bulb and call it good?.
View 6 RepliesAbout 6 weeks ago my 2004 4.6 scab had a glitch in that when you got going the seat belt warning chimes came on, to clear it stop at the next junction turn off re start and away you go. Now today its moved a step further on, the airbag not working light flashes and then stops on, but no seat belt chimes?
View 2 Replies2004 New Body F150 5.4L
Removed all cops, plugs, intake manifold and driver side head to repair bad valve. Removed Left side cat pipes as well. Had to disconnect most of upper engine harness and had to remove cpm and battery.
Repaired all mechanical issues and reconnected all electrical connectors and now when I turn the key to start the red security light on dash is still blinking steadily and I get no crank no start situation and it blows #34 PCM fuse which is injector/fuel fuse as soon as hit start.
Here are some things I have done trying to trouble shoot.
Battery shows 13.65 V
Unplugged FPDM back on rear frame rail and disconnected far left harness (looking from front) from PCM (should be engine harness), both the smaller plug that plugs into another harness and the main plug to the PCM.
Now when I turn on the key the security light goes out, the dash display says engine fail safe mode and the motor will turn over when I turn the key. This is still with the #34 fuse blown.
If I plug the engine harness back into the PCM, same no click no start.
If I leave engine harness unplugged from PCM and plug FPDM back in and turn key now it goes back to no crank no start and the security light blinks rapidly.
Only way I can get anything to turn over is far left harness disconnected, both plugs and the fdpm disconnected. Display says Engine Fail Safe Mode, and the security light goes out when I turn the key to start. I'm at a standstill as to what to do. The truck started fine prior to me taking it down for service.
I have an 07 King Ranch. I need to remove the rubber step off the rear bumper to paint it. Due to a typical Ford paint job it is rusting already. Can I just pull up on it ? If so should I wait for a warm day to prevent breaking the clips?
View 3 RepliesI need to replace my drivers seat because of a broken seat mount.
I found a used seat on eBay but there is a rip in the seat cushion. If I bought the seat, can if just swap the seat cushion with my old seat? If so, how difficult would that be to do?
I believe my GX470, 03 model, use to unlock the drivers door automatically when I removed the key from the ignition. Now that the battery has been replaced the doors no longer unlock when removing the key. Is there a way to reprogram this?
View 3 RepliesMy drivers edition gti is 2 weeks old. In 2 occasions, when I put the car in drive, I got that warning chime and some message flash on my dash. It happens so fast that by the time I look to see what it is, it disappears. No warning message stays on, and all fluids are ok. Any clue what's going on before I take it to the dealer? Not sure if there will be a fault code.
View 4 RepliesAny way to disable this annoying chime?
View 3 Replies