I've noticed lately, that when I do some spirited driving, my rcf is making this weird raspy type ticking noise from around 2500 rpm to 4000 rpm. It definitely doesn't sound normal...
When I take my car in for body repair next week, I plan on having the dealership change the breaks according to the TSB issued and also checking out this noise.
Been driving my Sonata 2015 2.0t for about 14 months, now. Just turned 13.5k miles. I had first noticed this issue a few months into having the car, but didn't think anything of it. At the time, I wasn't spending much time in the upper end of the rev range. Today, I finally decided that it bugs me enough to investigate.
At WOT, starting around 5500 rpm and going until redline, there is a "raspy" sound coming from the motor that I think might be predetonation, but I'm not sure. It isn't very loud, which is why I originally ignored it, but it is easily noticeable inside the car. I've made some modifications in the past few weeks (Intake, OCC, and Exhaust) so I'm starting to have a bit more fun with the car and want to make sure I get this resolved before it becomes a bigger issue.
Out of curiosity, I looked inside the catch can and noticed a couple drops of fluid (lighter in color), which was surprising since I only installed it ~50 miles ago. Any by "a couple drops" I mean maybe 3mL of fluid. Not sure if that is significant in this case, but I figured it is worth mentioning.
I'm wondering if it could just be the altitude (Denver, CO) and the stock tune is off just a bit? I've been looking into the Lap3 Uncle Chip and HKS performance plugs, but am hesitant to go any further without better understanding what might be happening.
My front driver side wheel is making clicking, ticking noise whenever I turn right. I am not sure what it is. Other than the clicking and ticking noise when turning, the car itself is running fine.
View 6 RepliesMy VR6 is making a ticking sound when i accelerate, between 2800-3100, then it dies down a little and then gets loudest at about 3600-4000. The noise stops at exactly 4000rpms every time. Here is a sound clip of what the noise sounds like... you can hear it best in the last 15 seconds or so in the video. Maybe its the timing chains...
[URL] .....
I recently traded my 2012 GS 350 for a 2015 GX 460. It's more my type of vehicle, and I am loving it except for a noise under the dashboard that seems to be somewhere behind the instrument cluster.
The noise is more of a ticking sound, and if I had to guess, it seems to be a wiring harness in that mesh-type wrapping that's moving around. I hear mostly over bumps in the road, but it also shifts when I accelerate from a stop. Unfortunately, the area where I'm hearing this is inaccessible without removing the dash.
Below is a link to a dash cam video I shot with the noise.
Lexus GX 460 Dash Rattle - YouTube
On my drive home today around 2500-3000 rpm I am getting real bad lifter ticking noise. When I let of the gas it stops but as soon as I get back on it it will start ticking again. I just bought oil for an oil change Mobile 1
0W-40 I'm pretty sure plus a mobile 1 filter. Will this stop the ticking noise or do I need to adjust my lifters?
At idle it is tick tick tick...... normal? 50,000 miles...
View 4 RepliesOur gen 1 has developed a (currently minor) noise issue when braking. I'd like to sort it out before it becomes serious.
The brakes are still strong, and the regenerative system appears to be working. When the brakes are applied (even gently) there is a pulsing raspy sound, seems like it is coming from the front, driver's side. It is more rapid at higher speeds, and louder during rapid deceleration. I guess I'd call it 'grinding', although this is much less unpleasant than the classic 'grinding brakes' I've heard on other cars.
In any other car I would figure a warped rotor or worn out brake pad. But I had imagined that the regenerative system handled light braking, and conventional brakes took over beyond a certain threshold. Now I'm hoping they work in tandem, even on gentle braking and this is just a boring, simple pad issue.
My 1.8t motor is still ticking around 2500-3500rpm. I have changed the oil with 5w-40 mobil1 no even 75 miles on oil change, Brand new oil pump with tensioner and chain. oil pick up tube cleaned and good. new plugs about 75 miles on them as well. Always ran 93 octane (highest I can get at my gas station) Only thing left that I can think of is my cam tensioner is bad.
When I accelerate up to speed it starts ticking but as soon as I let off the throttle it will stop get back on the gas it starts again.
Stockish 2000 gti 1.8t 5 speed. short ram intake.
Is there a way to tell if the cam tensioner is bad? .
Having problems with a squeaking or ticking noise coming from the front windshield area on the passenger side? I took off the A-pillar and tweeter speaker cover, and the noise was still there. Pressing on the A-pillar did not work and it's not any of the cords or plastics in there rubbing. It almost sounds like it's behind the A-pillar. Pressing on the dash, windshield, headliner, etc. all have no effect on the noise.
I'm trying really hard to fix this myself because I'm worried about a tech tearing apart the dash trying to fix it. It might end up worse than it is now. I'm thinking this TSB will need to be done (which seems to apply to all Toyotas): [URL] ....
Next on my list to check is the passenger side mirror (make sure it's fastened securely) and also the black liner under the windshield wipers. I also have foam (like the kind you use when installing a window AC) which I may also try stuffing into the bottom of the front windshield (and maybe the top) to see if that works.
If all else fails, the car is going to the dealer I guess. The Camry is such a quiet car that the noise is really irritating in an otherwise quiet interior. Other than this noise, the car is great! Just a little bummed because my 2005 has zero rattles or noises and my gf's old 2009 also had no rattles or noises. The 2015 refresh is nice, though we're still on the fence about the front grille. My relative is waiting for the 2016's to be released later this year and then he will be buying one for his patrol car. The 2015 isn't a full redesign but it looks different enough that he wants to wait for the next MY to come out. He's dreading leaving behind his 5MT Civic but it needs to be replaced. He hasn't had an auto, ever, come to think of it..
It sounds exactly like this, and is at its worse when accelerating: [URL] ....
I bought my car CPO but the svc records show the VSR recall was done just a few months before I bought it. I brought it in one time for the noise and they said it is normal, just a high pressure fuel pump noise.
View 14 RepliesWith the motor running and the air conditioning on, there is a intermittent ticking noise that comes and goes. It may be the compressor coming on and going off.
View 6 RepliesIs this normal? I've heard this is normal for all Toyotas/Lexus? I just picked up my 2013 a week ago and didn't notice it?
View 7 RepliesLexus 2013 GS350 AWD. Recently picked up this gs and upon driving. I have two concerns, one is the ticking noise in park or reverse. Secondly is the noise in the cabin by the drivers side front window.
View 7 RepliesI have a ticking noise that sounds like it is coming from my glove box when the A/C or Heater is on. I think its the servo motor but not sure. I think it just started. How difficult this would be to fix?
View 8 RepliesToday was the first time I was in my RX without the radio since I bought it. I have a 2011 RX CPO with 65000kms on the odometer.
When the vehicle is idling there is a tick-tick noise coming from the engine area that does not go away. I initially thought this noise was due to it being 0 Degree C but the noise continued for the duration of my 45 minute drive. Later in the day the noise was consistent was did not silence.
Experienced a noise that is evident when the side window is down which seems to coming from underneath the car. It is difficult to describe but it is a ticking / light metallic sound. Possibly coming from the exhaust system area. It is particularly annoying at a drive through window where the sound reflects off the building.
View 7 RepliesWhile searching on line for information about the LS460's engine ticking noise, I came across a fascinating engineering paper. It explains the source of the noise in all GDI engines and proposes two solutions. One is not feasible as it would require some further development of the engine but the other solution may be practical for the DIY enthusiast. The question would be what type of material to use which would withstand the conditions under the hood?
Hopefully you can open the PDF attachment I have included : isma2010_0514.pdf
It will take a few seconds to open the file depending on your download speed.....
I did a search and wasn't sure if this problem was talked about. I noticed some threads discussing "squeaks" but the noise I'm hearing can best be described as a clunking or ticking kind of sound.
I notice that when there's stress on the seat (e.g. going over speed bumps, making turns, especially when there's an incline/decline), I hear a clunking or ticking sound. I'm not 100% sure it's the seat (thought it might be the suspension) but the more I think about it, the more I'm thinking it's the seat.
As per this thread, it looks like it may be TSB NV001-06 MAY 06 Interior - Front Seat Squeaking Noise.
Just wondering what I'm describing sounds like the same problem addressed with this TSB. I found this link for instructions on how to fix it: [URL] ....
How to clarify step 5A and 5B for me? Which part are you supposed to cut off? The text says to cut off the seat locator pins to 2mm but the diagram is pointing at some metal piece that is attached to the seat locator pin. Or am I reading this wrong? I've never done anything like this before so I'm a bit apprehensive and want to get as much information as possible before I attempt to do something like take out my seat!
I am running into issues with my 3GS recently I am hearing loud ticking noise coming from the left side on the front of my car and from what most of people have told me is it might be my Axle or my wheel bearing so was wondering what the part number was for both of them and what is the best place to order these two parts from.
View 12 RepliesES350 Transmission - I have the following issue that has happened to me twice now.
When it's cold outside (around -10C or below), I start the car and let it run for about 1 minute. I pull out of the parking lot and drive down the street for a very short distance and stop at the intersection and wait to turn left. This only happens when I wait for a minute or more. I go to turn left and the car feels like it has no power and stays in 1st gear all the way up to 4000 rpm and then shifts. After this the car is totally fine and it shifts at the normal 1500 rpm or so going about 15km/hr. When I'm sitting at the intersection waiting to turn, the car is idling at about 1200 rpm or so while the car is warming up.
I've tried many times to recreate the issue but I couldn't do it because I never let the car sit and idle. If it's constantly moving with stop and go it's fine.
I called the Lexus dealer to ask about this and they told me the first thing to do is change the transmission fluid because it could be low or dirty. The car is 6 1/2 years old (July 2006) with 58,000km on it. They said the transmission fluid should be changed at the 6 year interval. They also asked me if I had the car in the shift manual mode (which I didn't) because it seemed to exhibit this behaviour.