Lexus LX 2008+ :: Clunking Noise When Switch Back To H4 From L4
Mar 1, 2015
I recently got a 2015 LX 570 brand new. It now has 112 miles. It was snowing heavily yesterday so I decided to try the L4 switch.
However, I forget to change the gear to N when I tried to switched back from L4 to H4, it was in D mode; The car still switched back to H4 but with a clunking noise. It bothered me a lot because I don't want to damage a new car like this. I won't do that in the future but do you guys think the car is seriously damaged today? It shows no sign of damage though.
View 12 Replies
Advertisement
Last week while my wife was pulling out the cart . I heard a grinding noise coming from the back wheels. i figured it was time for new brakes, I changed the front last year so rears were pending.
I changed rotors and pads, they were like 20 per left. also looked like the e brake was touching the rotors. I adjusted that a little.
So the noise is still there and its worse. I have no clue what could be making the noise. brake dust shield maybe.. shocks .. Its worse when i turn right...
I have done brakes on every car i have owned and it was pretty easy for lx. What could be causing the noise.
View 3 Replies
I just got my led switch back lights in for my 08 camry. But I have run into a problem I have installed all four led signal lights (switch backs in the front and led ambers in the back) and the led flash relay for my car. What is happening is that the led will turn on for a couple of seconds and then the fuse for the signal lights burns out both the one under the dash and the one under the hood.
View 3 Replies
Yesterday I had the rear rotors turned and installed some akebono brake pads. I drove it around and it sounded fine. Today my wife drove it to school and called me telling me whenever she came to a stop she would hear clunking noise in the back of the car. I drove it and its true.
I took off the tires again and all 4 bolts are tight on each side. I didn't know the torque specs so I tightened them enough yesterday. I applied the proper synthetic grease on the slide pins, the back of the pads and where the pads touch the caliper bracket.
View 3 Replies
Tried to open the rear hatch with the key. No lights flashing. No beep.... Dead.
Tried to open it with the switch under the steering wheel. No lights flashing. No beep.... Dead.
I have an appointment at Lexus but this sounds like warranty stuff to me -- sudden death of rear hatch? Lexus informed me there is no manual way to open the trunk. Can I somehow manually open the trunk?
View 13 Replies
I had some work done on a door at a body shop, battery died, when I got car back all the switches on the master control were flashing, and the right rear door that was taken off and worked on,but all windows worked, now the swiches dont flash but the master control wont work with rear passenger door. I read you have to program all window switched again, I tried that in the online description here but its not working?
View 1 Replies
I have a 2007 GS 350 and i bought the weather tech window visors for my car with matching floor liners. Both look great on the car but I am having problems with the window visors. Since installing them (following the directions letting them sit for a week or so without opening the windows) I still don't have the automatic feature back to roll up in one click of the switch. once it hits the top of the window the safety feature kicks in and the window rolls back down. if i hold the window switch all the way it will close. I am trying to get back that one click and automatically closes. my friend has the same visors on his is 250 and his still works fine.
View 4 Replies
When my truck is parked, I go to the rear tire and shake it back and forth and hear a slight clunking noise from either the tire or rear end. Its like the axle is making the noise?
2000 7.3 Power Strke Super Crew 4x4
View 6 Replies
I've got a clunk in the front end....replaced all the ball joints......checked the sway bar......checked the tie rods......can't find anything wrong...... Shocks go bad and clunk???
View 14 Replies
I've read alot of info about the 4WD system on the F150's, and I'm having trouble diagnosing what might be going on with mine.
When I put my truck in 4HI (or 4LO), I get a popping sound that seems to come from the front middle/front drivers side when going at speeds around 20-25 and over. I don't experience any loss in traction (that I can tell) or power, but the popping is very loud and noticeable (passengers can hear it clearly).
My problem is a little different than most, as their issues with popping seem to happen when they are not in 4WD, where mine is only when in 4WD. I replaced the IWE solenoid today (wanted to anyway to get the updated casing/shroud) and the problem stayed. I also disconnected the vacuum lines at the solenoid and drove - no noise. I then kicked in 4WD on the switch, and the noise started, which leads me to think it is not vacuum related.
I am kind of lost as to what may be going on. I would think something where teeth broke, etc. would make noise all the time in 4WD, not intermittently or at certain speeds. The noise sounds almost like popcorn popping. I went up the same hill about a dozen times today, and it happened maybe 5-6 times. I don't hear it often (if at all) with speeds below 20 MPH. I can switch in and out of 2WD, 4HI, and 4LO all day with no issues, as well.
The only modifications to the front end have been a 2.5 inch leveling kit, and the only other issues I notice in the front end is a shaking when on the highway, that seems to go away after a while of driving at the same speed. I recently had a front end alignment, and the only thing the tech mentioned was that I will need ball joints in the next 6-8 months (but he said they weren't bad).
View 5 Replies
In the 2008 ES350 owner manual, there is a picture of an AFS OFF switch (to turn off the Adaptive Front Lighting system) which is located at the knee dash area above your right knee (on the right side of the steering column). However, the switch is not there when I look for it in my car which has the AFS w/ HID lamp option.
View 14 Replies
I have a 2006 F150 FX4 and after having the 4x4 go out and replaced the front right IWE have fixed the 4x4 but still hearing a clunking noise.
The clunking noise started after the 4x4 went out and was really bad for awhile and then went away and has now come back really bad. It sounds like its coming from the front driver's side wheel area and clunks as fast as the wheel turns.(faster = more clunks).
I'm very new to mechanic stuff but enjoy learning and fixing things myself.
View 1 Replies
So my truck is making a kind of a clunk noise in the trans area does it between 30-50mph does it more often when cruise control is on but still does it from time to time when it's off. What it could be?
View 1 Replies
I installed my hks ssm yesterday,it sounded great except for a clunking noise every time i pass by an uneven road...i found out that the hks pipe was hitting "the round thing next to the shocks" ... that's why the oem muffler had a little round stopper.. I tried to wrap it with a little exhaust wrap thinking it would fix it but it did'nt, just wondering if there's a DIY or something for this problem.
View 11 Replies
I have a 2008 Chevy Malibu. Lately when the engine is cold I will get to the end of the street and when I apply the brakes the car will make a clunking noise and a couple of times it has actually died and I have to restart the car. I only experience this the first thing in the morning, after that the car seems fine. I cannot tell if it is the brakes causing the problem or the transmission.
View 5 Replies
I have a 2004 2WD supercab. And am hearing a 'clunking' sound when I turn almost full-lock. Below is a summary of what I have experienced so far:
- My truck used to be lowered 2" (below stock) at the front since new. Last month I lifted it (front and rear) and it now sits 2" above stock on new rancho shocks.
- I installed a camber kit and had the front aligned (toe and camber) after the above suspension work.
- The truck drove beautifully for two weeks until one day a 'clunking' sound was heard from the front-left every time I turned left. The alignment also changed as I had to now hold the steering very slightly to the left to drive straight.
- The alignment shop re-did the toe tracking (the camber did not change) and the truck drove great for about a day. Now I can hear the same clunking sound when I turn right and the tracking is again screwed up meaning I need to hold the steering very slightly to the right to drive straight.
What parts are playing up and what may need replacing?
View 2 Replies
So a few months ago I started hearing some clunking under the vehicle so I got under there and sure enough the control arm bushings were shot. Took it in to Lexus for service and had them look while at it to confirm that is indeed the issue. After replacing all 8 of the front end control arms and 2 of the ball joints the clunking is still there. Seems to only do it while turning. Regardless whether giving it gas or braking.
What it might be? Its fairly loud and definitely coming from the front suspension (I can feel it through the steering). The control arms are brand new. The ball joints are brand new. Just checked the tie rods and they're are in good shape. What else should I check for?
View 2 Replies
My outback has 57k miles on it and already needs the front struts and rack replaced (diagnosed today at the Subaru dealership). The car has been making a whining noise in the engine and has been clunking when making turns for the past week. I have also noticed it hasn't been taking bumps as smoothly. They told me that both ends of the rack are leaking and both front struts are leaking. My husband did admit to hitting the curb on the driver side front tire pretty hard while making a u-turn about a month ago, but all other driving is pretty standard. Yes, we drive on dirt roads in the mountains a few times a year for hiking, but don't drive in a manner that I consider wrong. Did the u-turn incident cause this? (hard to believe that would affect both sides of the rack and struts).
View 2 Replies
I am having a hard time locating a mechanical knock coming from my truck. This is not an engine knock but rather a clunking noise when I come to a slightly abrupt stop and sometimes when I take off or am steering. I have recently replaced my upper and lower ball joints and all the u-joints as well. My truck has a 6" Fabtech Coil over lift and a 3" body lift. The truck is also rather squeaky when going over speed bumps.
View 8 Replies
I have noticed since I got the car( 6 months ago), when ever I have passengers in the back seats i hear a clunking noise coming from the right rear suspension area.
( I don't know if this is from the suspension or not and I only notice this noise when there are passengers in the back). The clunking noise is really annoying.
View 3 Replies
I have a 2008 LS460 17,000 miles. I hear what I would describe as a clunking sound and feeling when coming to a complete stop. The noise and feeling is similar to worn suspension bushings. I took the car into my local dealer. After inspection they advised me there is a problem with my car because they heard the noise and feeling like I described. They also stated there is "no fix yet" per a service bulletin for the described problem. They also stated they don't know when a fix will be available.
It appears to be getting worse and my advisor stated he has another customer that's been waiting some time now for a fix. I'd really like to know the service bulletin so I can follow through with the repair by simply asking "Are the parts available for service bulletin 1234 yet? Perhaps others are also struggling with the same symptoms and yet to find a fix.
View 9 Replies
