Lexus LS 2007+ :: Which Ceramic Brake Pads Best For 460
Jan 16, 2016
getting Ceramic brake pads for lexus ls460.
what is the best brand and from which vender can i get it from.
Jan 16, 2016
Advertisement
Lexus RC 2015+ :: Ceramic Brake Pads With Stock Rotors?
I'm getting sick of having my rims getting dirty after one hour of driving because of all the brake dust that the OEM pads give off. I keep hearing from shops that ceramic brake pads are not only more quiet but will put out much less brake dust. On the other hand, Lexus is telling me that if I do that, I will forsure damage the rotors but I really feel like they just want me to keep the car stock which is why they're saying that.
Are ceramic brake pads a bad idea with stock rotors?
Corolla / Matrix 2009-13 :: How Good Is Ceramic Brake Pads
i have a 2010 Corolla XRS and was wondering the following:
-How good are ceramic brake pads?
-Do they last longer than normal OEM pads?....under normal driving.
I was considering buying a complete set of drilled rotors and ceramic pads for my car.
Honda - Accord :: 1992 - Advantages Of Ceramic Brake Pads?
A recent Car Talk column mentioned advantages to ceramic brake pads.
So, when I took my wife's '92 Accord EX in for routine service I asked about them.
Service knew nothing and referred me to Parts. The Parts guy said they don't use them, adding "They wear the rotors faster!"
Is this really a problem???
Lexus LS 2007+ :: Reset Brake Light After Pads Replacement
I just changed brake pads front and rear. My light was on indicating need for such. After changing i figured light would reset and turn off. Not the case. How do i reset the light? Was there something i needed to do to sensor when pads changed?
View 5 RepliesLexus SC430 :: 2007 - How To Change Rear Brake Pads
I am wanting to change my rear brake pads and . Looking for step by step instructions or photos.
View 1 RepliesCamry :: Centric Pads - Difference Between Posi Quiet And Premium Ceramic
posi quiet part # for 2007-11 camry front...105.12930 106.12930
ceramice part # 301.12930
I am getting these pads with centric/powerslot rotors. I just cant find the difference between these 2 pads.
Toyota - Rav4 :: 2007 - Ceramic Brake Grinding Due To Slight Rust Build-up?
In September 2012, I had all of my brake pads and my front rotors replaced. On at least two occasions since then, I have noticed grinding. I took the car back to be looked at in October and today and in both instances the mechanics couldn't find a thing wrong with the brakes. On Saturday, I was driving more than usual and they were grinding the majority of the time. I'm not sure why this problem comes and goes and whether it increases with use over the day. I find it easier to replicate when coming to a stop in the street rather than in the driveway at a low speed. Is there something I ought to have the mechanics test out? In each of these cases, they have test driven my car, but at the same time, I don't want to tell them "Try driving it for an hour".
I drive a 2007 Toyota RAV4 (about 56000 miles on it) and while I am aware of grinding due to slight rust build-up, that issue usually clears itself up after the first few brakes of the day (I believe that this is a common problem).
Lexus IS 2014+ :: Front Brake Pads Touching The Rotors / E-Brake Engaged And In Park
I noticed the front brake pads were touching the rotors when I was painting the brake calipers. I had my e-brake engaged and in park. I'm assuming the e-brake only brakes the rear wheels because the front rotors were still movable. Although the car still rides fine but I'm not sure if this is normal.
View 1 RepliesSanta Fe (CM - 2007-12) :: Squeaking On Passenger Side - Brake Pads?
My son was hearing a bit of a squeaking on the passenger side. So I decided after some time to pull the front wheel. (most important brake). Well the pad wasn't moving on the outer guides (serviced it as required and lubed to get it moving). But the lower guide pin wouldn't move in/out. Needed to drift it out and it was very well rusted end to end. I put new pads on early as year I am sure and all was fine. I cleaned the pin on my wire wheel grinder. That lower pin had a collar near then end. Turns out its rubber, I thought it was a metal spring collar. Oh well the wire wheel did a number on it. I don't know the significant of that piece nor whether the pin is in the right place since the top one is different. I do these one at a time so its almost impossible I swapped them in the number of times they've been out.
I never seen so much tightening on any vehicle of pads and pins rusting in as on this vehicle. One has to wonder why. My vehicle also seems to have or what sound like a gear slap upon engaging in reverse or forward from front and back which is most notable after sitting and first engaged. Not every time but this is built in 2007 and there is a TSB for some washers. Hyundai Canada does NOT use the same TSB number they have their own. I talked to a dealer about it but he never indicated it would be the cause only its a different number. I am not impressed in this AWD drive power train. It needs a lot of TLC and the slap I hear is typically due to power train engagement play/slack being excessive most likely due to wear somewhere.. Even my rear sound off not a howl but noisy running which doesn't change with road surfaces so its not the tires. Maybe the AWD bearing or unit going. No of this should even remotely close to needed anything for at least another 100-150k at least.
Camry :: 2007 SE - Knocking Sound After Changing Front Brake Pads
Scion TC for Camry SE 2007.
I changed the front brake pads and resurfaced the rotors. After putting everything back together, I took the car to test drive it. The stopping power is fine and there is no squeaking or robbing sounds. However, when I apply the brakes at lower speeds moving forward there is knocking sounds the comes with the tire rotations. What is the reason for this sound?
This is my second time changing the pads and rotors, with the first with no issues. I put grease between the shams and the pads, and I sprayed the rotors with brake cleaner before the installation.
Lexus IS 2014+ :: Brake Pads - Brakes Have Been Squeaking
So my brakes have been squeaking for the past week. Brought it in to the dealership. They said i need new front brake pads. I only have 22k miles on my 3is and that seems like a really look mileage for the breaks to be worn off. I dont track ny car and i pretty much drive slow. How long are your brake pads lasting? Is this normal for the 3is pads to wear off this fast?
View 14 RepliesLexus GS 2006-11 :: GS350 Brake Pads Had No Shims?
I recently replaced my pads and rotors and when I pulled everything out there were no shims? is that ok run without shims? my rotors were warped bad and I'm wondering if that was part of the cause? my pads had plenty off life left but I changed them anyways? Doing the rear to since I still feel a light wobble when on real smooth pavement...
View 5 RepliesLexus GX 2010+ :: 2012 - When To Change Brake Pads
How can you tell if it is time to change brake pads without taking off the wheels on the 2012 GX460 Premium?
View 14 RepliesPrius (Gen 2) :: 2007 All Lights Continue To Stay On While Driving After Changing Brake Pads
So, I changed the front brake pads on my 2007 Prius blindly, and in doing so I bled the lines (I also had the key in my pocket!). Now, the ABS light, VSC light and (!) light all are on and continue to stay on while driving. Is this something as simple as resetting the codes? Is the vehicle safe to drive to a repair shop to set strait?
View 2 RepliesFord 6.0L Power Stroke Diesel :: 2007 F250 - Rear Brake Pads Don't Fit
I bought new pads for my truck and the fronts went on with no problem at all, but when I got to the rear the tabs/ears on the pads are about 1/8 inch wider than the notch they are supposed to fit in. I bought part number BR-1067, which is supposed to fit but obviously doesn't. What part number should I have bought? My truck is a 2007 F250 Super Crew Lariat FX4.
View 9 RepliesLexus GS 2006-11 :: Brake Pads Rattling When Hit Brakes Slowly
My brake pads been rattling around whenever i hit the brake slowly. I think its the front one. My car is 160k miles and still using the original brake hardware kit. Will the new one fix this annoying rattle? I just cant see how a new piece of metal will stop the pads to move around.
View 5 RepliesLexus IS 2014+ :: Changing Brake Pads Without Unbolting The Caliper?
What is the proper procedure in changing the brake pads without unbolting the caliper?
View 7 RepliesLexus GS 2006-11 :: New Brake Pads Click And Squeal When Shifting Car Forward Or Backward
I bought Akebono cermaic pads for my GS 350 AWD which I thought were high quality good fitment pads as they even advertise them on tirerack. Now I am not really impressed. After about a month every time I pull out of my garage in the morning they click and squeal (squeak).
The scenario: After I come home from work at night I pull into my driveway and park in the garage. The pads are already seated in the forward position from driveing forward and parking. Then in the morning I go and back up in reverse to pull out, I tap the brakes to stop and shift into drive to pull forward; at the moment I depress the break pedal the two front rotors simultaneously click and sometimes squeal. Sometimes when I get in my car at the transit center in front of everyone this happens.
Is there a shim kit or something I can add to the brake pads to sit in between the pads and rotors to get them to stop moving. I know that there not moving a lot but whatever play they have is causing me brake pad buyers remorse.
I went with these Akebono ceramic because they dust much less then stock semi-metallic pads. Becuase I had them on my Audi and they didnt dust nearly as much as the stock set. But once and while they too would click in this situation but nearly as much as now in my Lex.
Lexus GS 2006-11 :: Loud Screeching Noise - Brake Pads Replacement On 2008 AWD
I'm having issues with very loud screeching noises on my 08 awd. Sounds like a garbage truck. Lexus said its $625 to replace brake pads and rotors to stop the noise. I'm not really a fan of DIY so is that a fair price for the parts and labor or should I bring it somewhere else?
View 14 RepliesLexus LS 2007+ :: Brakes Shudder After Changing Pads And Machining Rotors
2008 LS600hl with 31K miles, been having low speed brakes shudder for quite sometime even after changing pads and machining rotors. This weekend thought about putting grease on the pins holding the pads, this did the trick, shudder is gone!
View 9 Replies