Lexus LS 2007+ :: LS460 - Whining Noise Coming From Right Front Wheel Assembly
Jun 24, 2010
Recently purchased a LS-460(CPO). The vehicle has 36,000 miles logged. I've had a few issues in the first few months:
1) Whining noise coming from the right front wheel assembly..front rt bearing worn.
2) Replaced homelink system..would not program.
3) Glove box had to be replaced due to not closing properly(adjustment not possible)
4) Plastic coating on all 4 locking lugnuts was chipping and rusting. I'm not trying to be a troll here..however, just not what I expected from Lexus. I really enjoy driving the vehicle..I'm just not sure I want to own it outside of a warranty.
View 14 Replies
Advertisement
My LS 460 has a pulsing wheel/front end noise that seems to increase as the speed increases from 5 mph to about 30mph and then fades out. I brought it in for service and they test drove it twice with 1 and then 2 service techs. They could hear the noise and said to me that they think it is cupping on the tires. The tires are in great condition inside to outside.Tires have only 14000 K. I switched the back to the front. The same dut-dut-dut-dut sound increases as the speed increases to about 30mph.
I believe that the noise is something more serious. I noticed that when the suspension compresses over a high point in the road at say 20mph the sound will stop during the time the car is comming of the high point in the road. Could this be a bearing/suspention- or something with the breaking motor because I also have been using the break hold feature for several months and not sure if that could cause harm. Also I do hear more grind or grumbling when turning the wheel to the left at low speed then when turning to the right.
View 7 Replies
MY Ls460 2010 AWD is making annoying ticking noise since I bought it 2 months ago ( 76k milage ) , it seems that the sound is mainly coming under the hood on right front fender side .
View 6 Replies
Just purchased a 2010 ls with 20,000 miles on it. Brakes make a popping noise when coming to a stop. Not all the time, seem to get worse as brakes get hot. Have had to dealer twice they have resurfaced rotor, bled system put new pads. Still have noise my service manager opened a trouble in the lexus system and called Atlanta. They said this is characteristic of this car. I drove a couple of other ls cars and did not hear the noise. Not sure where this is going to end up. I saw where the brake actuators where changed on the 07,08 and 09.
View 14 Replies
I have a 2009 460 awd with adjustable suspension and when making a right turn the front left side makes a noise. I have had the dealer look at it 5 times or more but each time I am told that there are no problems. Now that the weather is getting colder it is becoming more pronounced.
View 7 Replies
I just bought a 2006 (mk2) Santa Fe 2.2 CDX manual.Overall I'm pleased with the car but I have noticed over the past week of ownership a whining noise coming from under the floor area towards the front (I think). The noise only occurs around the 20mph mark ( no other speed) and is there whether I'm in gear or just coasting.The car has done 43000 (so not high mileage) has a full service history and only one owner prior to me. It does have a tow bar (which I wanted) just I case this may be relevant.
View 4 Replies
Today my car came back from service, now when I reverse park I get this display where when you move the steering wheel you can choose the spot you park in. Before I was just happy reverse parking my car myself and get a different display showing me the back view with with green and red lines I think where the car is moving towards etc. I can't figure out how to disable this steering wheel park assist.
View 1 Replies
I used to have a GS300 and just recently traded in for an 07 CPO LS460 SWB, Mercury Metallic with light gray interior. Love the car, big difference in quality of material and build. Anyways, I noticed that the hood and front fenders get really hot to touch after driving. It seems to be hotter than all my other cars. The coolant gauge in the instrument panel stays in the middle and does not show over heating. The hood stays hot and takes quite a while to cool to ambient temperature. Is it attributed to the engine compartment covered both top and bottom (for aerodynamic reason), which may delay air flow and cooling?
Recently Car and Driver had an article regarding brake overheating in Nissan 370Z Nismo, under harsh repeated braking. The brake fluid would boil and loose vacuum. After analysis, the suspicion was that in the zeal to improve aerodynamics, the engineers did not design adequate brake cooling. I'm wondering if Lexus engineers, in pursuit of aerodynamics, may have compromised the cooling and airflow through the engine bay. Like I said, there are no indications of the engine overheating, just the hood getting pretty hot after even a short drive. Most likely, I'm just paranoid and my OCD is kicking in.
View 11 Replies
Sometimes when driving I hear a light squeaking sound coming from the front wheel area. When i drive slow, it is a slow squeak, and when I go fast, the squeaking speeds up. I am thinking about spraying some wd-40 or silicone lubricant behind the wheel to lubricate the area to see if it solves my problem. I will be sure not to get any near the brake area but my question is, does spray wd-40 under the chassis or around the control arm area to stop those annoying squeaking sounds?
View 6 Replies
I've just won a 2009 LS460L with 60k, at an auction, with very minimal damage to the front. Ill need to replace bumper cover, grill, hood and lights. I am pretty stoked about it.
The LS460 looks sort of unbalanced with the sides and the rear, and a higher front end. I've searched and search but I am looking for a picture, only added a front lip to sort of balance it out. I dont want a full kit, just not my thing. Just the front.
As for grill. While getting front end painted, I plan on doing similar style, a user here did. This is plastidip but of course ill be painting it. I also noticed on here, someone else had their bumper painted but had them paint his grill as well, but he painted the chrome grill housing. I like that chrome accent and plan on keeping it.
[URL] ....
[URL] ....
View 4 Replies
My LS460 recently developed a rattle from the front drivers side. It's triggered more by rumbles/vibrations from an uneven surface rather than speed bumps or large pot holes.
It sounds a bit like a washer vibrating on a metal tray (for what that's worth)!
Interestingly though it gets a LOT worse when the car is in 'Comfort' suspension mode, and is nowhere near as bad in 'Sports' mode. So it seems that having the suspension higher gives this thing more room to rattle.
I noticed in the service history that the front passenger air strut was replaced 30k ago, so I'm worrying that there is a large bill on the horizon.
View 14 Replies
how to replace the front Highlight.
how to replace my head light, on the passenger side.
View 14 Replies
I'm getting "popping" noises when braking from my front, drivers side suspension. Past knowledge tells me it's probably an upper control arm / Tie Rod/Swaybar link problem. Everything is nice and tight in there.
Also getting a violent "thumping" noise/feeling constantly when driving from the same side.
I just dropped it off at the dealer, and they are probably going to come back saying the upper control arm needs to be replaced (we will see).
View 11 Replies
This a 3.3L engine although the noise has nothing to do with the engine but front left near tire assembly, what can it be?
View 6 Replies
I've had some awful noise coming from the front drivers side of my car. Determining the likly cause to be the wheel bearing, I decided to tackle replacing the hub assembly as a lovely weekend project. Things were going along ok - Removed brake caliper, removed the axle nut (that wasn't fun), removed the rotor (rather persistently stuck on, but it gave in the end), and then came removing the hub assembly itself. Had a rented hub puller, put it on, started tightening it down and tapping on the hub as I went. It was getting pretty tight on there (was starting to worry about the safety of the cv shaft), and then as I tapped on the hub one last time, the hub and hub puller popped off the car... I was elated, until I realized rather than pulling the entire hub assembly out, it had actually separated the inner track of the bearing from the outer track, leaving the wheel bearing and flange behind inside the steering knuckle.
So, here I sit, with half my hub assembly on the ground and the other half still in the car. How to get the rest of the hub assembly out, now that there is nothing to really pull on? I've tapped around on it for a couple hours, and soaked it in enough penetrating oil to make the car flamable, but no give. I've even tried putting the hub bolts back in through the back and tapping on them with a hammer to no avail (probably going to have to replace the bolts now, but one problem at a time).
View 19 Replies
The last couple of days I've noticed a metal clinking noise coming from the right front wheel area when I go over bumps. The best way I can describe it is what it sounds like when there's a loose washer and nut on a bolt. A metal on metal sort of thing. Tonight I was able to replicate the sound I heard by pounding on the tire and got it on video and posted it below. Watch in HD to hear the sound I'm referencing clearly.
[URL] .....
A couple of things to consider:
1. Just had spacers installed a few days ago
2. Also diagnosed the "clicking brake while turning slowly" issue. Thread about it here: [URL] .... Wondering if this has anything to do with the noise.
I have an appointment with Lexus tomorrow morning to have the brake clicking fixed under the TSB and several other issues addressed. Mostly rattles...
View 2 Replies
I've got a 2008 santa fe limited 3.3 awd with about 170000 km on it. Lately when I brake I've been hearing a clicking noise coming from what sounds like the driver side front wheel area.
Had it in to my mechanic who checked the brakes and said that pads/calipers/rotors were all fine. They replaced the passenger side front bearing on the lower control arm a few weeks ago and said there is no play or noise coming from any other suspension components.
Where to look next? My mechanic isn't sure what it is so I was going to take it to the dealer and see if they can fix it. Also had new tires installed about a month ago
View 7 Replies
I went to go pump gas and this happened. Had to tow it back home. Battery is a few months old. I also tried putting a fully charged jump box to it with no results.
Gonna hook a scanner to it later to see if there is any code. (Shouldn't be any if it's the starter...correct???)
I hooked up a scanner to the car and found:
P0335 ( Crankshaft position sensor)
P0340 P0345 P0365 P0390 Camshaft position sensor
I guess its safe to eliminate the starter. Do all the sensors need replacing or do you think one particular sensor is causing all the other sensors to go off as well.
View 13 Replies
When I start up my LS460, i hear some rattling noise comming from the engine..sounds like rocks/sand? im not sure but it only happens when i start up the car..after that..the car is completely quiet and drives perfectly fine...
View 14 Replies
Just came from dealer because of a rattling noise coming from the front end. They said it was caliper piston. They also said its common just that some is not as loud others. They are trying to fix it.
View 1 Replies
I have had this intermittent clicking noise from the front left wheels. It sounds almost like a rock wedged in the tread but its not. I checked and the tire is clean. I inspected as much as I can see but see nothing abnormal. Any clue what the deal is?
I stared having the noise right after having the front left tire replaced and it seems to happen when the brakes are hot. I don't hear it in the morning or if I let the car cool down and drive it an hour or two later. My brakes are original rotors at 74K miles and the pads are probably in the 45K range . Not sure what the deal is but it drives me crazy when I can hear with the windows down ( I live in AZ its still in the 70s). I had an issue like this with my GS350 but cant remember what fixed it or what the issue was .
View 14 Replies
