Is there a simple, inexpensive, right now fix to stop the rubbing on the rear tires? I'm running 265/30/22 tires and get tire scraping on dips and some turns with a half tank of gas and two small passengers.
View 14 RepliesI recently got a set of staggered IS 350 wheels, and while I realize it's not ideal , my father wants to know if they will fit his 2012 ES350 ? The front tires I'm having put on are 225 / 45 / 18, but the tears are still good and are 255 / 40 / 18. Will the 255 fit in the back without rubbing issues.
So, I just went ahead and put the wheel on. The stats are 18x8.5, +45 offset, and 255/40/18.
Initially the tire rubbed while driving, the wheel was able to rotate, but not without the rotating rub noise against the strut. So then I put on a 5mm spacer I had and it was perfect.
I have been having issues with the tires rubbing even on a slight dip on the freeway specially when running at about 70 mph . I have a 20x9 front offset 32 tires 245/35/20 and 20x10 rear offset 35 tires 275/30/20. I also installed tanabe nf210 springs. Is it bec of the offset? What can I do to get rid of it?
View 14 RepliesMy 2006 AWD RX330 rotors were starting to get warped so I changed them out along with new pads. I put new rotors in the front and new pads all around. Everything went smoothly other than getting the bottom rear slider pins to go back in easily.
Well it's been a week now and I noticed that if I press on the brakes at low speeds say 20-30 mph with a decent amount of pressure nothing too crazy there is a rubbing/pulsing noise right before i stop completely. It doesn't happen right when I apply the brake but right before the stop. It kind of sounds like the ABS is kicking in but i don't feel it in the pedal like you do for ABS or I don't hear the electrical noise you hear from ABS.
I have a 2007 ES350, twice now when turning a corner from a stop my tires or back end has stuttered.
View 1 RepliesThe rear left side is rubbing over bumps with 2 adults in the back...
Specs are as follows :
Rays VR G25
19x8.5 ET45
19x9.5 ET42
Goodyear AS2 Front - 225/35/19, Rear - 265/30/19
Lowered on HKS Max IV GT
Really want to keep the lowered look and in fact I want to lower the rear 5mm more. Thinking of changing to 255 in place of the 265 for the rear.
So my lovely wife tells me that something sounds sounds like it is rubbing from underneath the hood of my Lexus. So I take it to the dealership and they tell me it's the the the tensioner for the timing belt needs to be replaced. So I have them replace it and In the process they tell me that it sounds like there is something wrong with the fuel pump but they were able to quiet down though I don't understand how. Anyway after I pick the car up it sounds exactly the same as it did when I left it, personally I don't feel like I should pay for labor on this repair but besides that I don't understand what this issue could be. It sounds like something is rubbing while the car is running.. Lexus 2002 ES300 ..
View 8 RepliesIn the attached image, I circled an area in red. When going over bumps, I hear a soft but annoying rubbing noise.
Any clue how to fix this?
*image is taken from the drive side rear seat.*
I'm having some rubbing issues on the rear driver side after installing 19" vossens. I'm lowered on S-techs. The bump stops were cut per instructions. I'm wondering if I replace the cut bump stops with new ones, could this minimize the rubbing by limiting the suspension travel?
I'm only rubbing on dips and when the car is weighed down. My other option would be replace the teins with RSR down's along with new bump stops.
I have got 22 inch rims and whenever someone sits in the back, it's always rubbing. What can I do to prevent that. Someone recommended me spacers.
View 14 RepliesI had this problem before on my 2009 RX350 and took it to the dealer - they were stumped at first but eventually figured out it was the spare tire making noise every time I made a turn into a driveway or went over a little hill/bump.
They did something to adjust it or tighten it and the jack etc. and it went away. Now the sound is back, big time. How to adjust the spare to get rid of this. Also if there's a hack to pad or insulate the spare that would be great.
I also found another thread on a similar thing but it's talking about struts, shocks and trailing arms on 3rd generations. [URL] ....
I have an '04 V6 and everytime I turn the wheel to turn at low speed I get a sound and felling like the tires are skipping or scrubbing the ground. I have no weird wear or shakes and it tracks straight. What would cause this??
View 7 RepliesWhen I look into the brakes on the two rear tires, I see a good bit of rust on the discs. Should I be concerned?
View 2 RepliesI just discovered a bubble on the sidewall in on of my wife's front tires. I am pretty sure I will need to replace it with a new one. However, the other three tires have about 15k miles on it. Should I replace the other front tire and have two new tires in the front or maybe the back instead of just one? Do most people in my situation replace just the bad tire or both?
View 3 RepliesI have vossen cv3 with Kumho ecsta 245/30/22 front and 295/25/22 rear they are only 6 months old and the front tire inner sidewalks are cracking.
View 14 RepliesI recently went to Northside Lexus for the two TSB on hesitation. The service lady sent me a print out telling me all the dealer fixes that I need to do. This print out told me that I need new tires.
I went at the one on 1960 in Houston. The service manager looked up my records and found out that I purchased a new set of Michelin Pilot MXM4s in Jan. 2010. I have 12,000 miles on these tires and they are all at 3/32s. He told me that they did not have any warranty. Then we both agreed that this is not right for MXM4s. Bought a new set of Michelin Pilot Sport AS Plus to replace the previous set. He gave me 1/2 off the price of a new set.
We could see that all four tires were wearing on the inside. Discount tire guys told me that Lexus sets the alignment on the LS to wear on the inside. They said Lexus does this on all their sports sedans. Did I have bad tires or did I have a bad alignment?
I recently changed my shocks which lowered the front by half an inch. I have 19*8.5(et 30) wheels with 235/35 at the front. Since then my tires are rubbing the fenders whenever I hit a bump. I'm thinking of rolling up the front fenders.
View 13 RepliesI bought a 2010 lexus ls460l awd with about 80,00 miles on it and also bought a warranty for 3 year/ 36,000 miles. After having the car for a couple of days i noticed things that I didn't like as well as figured weren't normal, alot of it had to do with noises, the dealer told me they didn't cover noises, and i asked if those noises meant something was wrong then what?? It was mostly squeaks and rattles that I didn't expect to hear in a car of this caliber, going over uneven road there's a constant squeak coming from the front, if its a bump its an extremely hard thump in the rear, and the idle.....is BY FAR the loudest I've ever heard in any car that I've been in.
When I turned the wheel all the way in either direction and pressed the gas, it made a rubbing noise with a harsh vibration, brakes squeak horribly about 2 days out of the week for about an hour then it goes away. When i took it in they said everything was fine except a part on the rear struts and said they needed some special oil for the vibrating rubbing issue. Picked up the car and noticed the vibrating issue was resolved but during the drive home noticed everything else stayed the same.
I recently purchased a 2009 es in good condition, the tires were quite old and loud and the car pulled to one side. I purchased some primacy's and they are great, however the pulling/poor alignment was still there, I then took it back to the dealership and they rotated the tires which actually worked with the pulling but then there was a slight vibration from about 100-130, by 140 it's gone, but i seldom drive that fast.... I then had the tires re-balanced and the alignment done again, the vibration perhaps lessened but i can still feel it...
View 7 RepliesI live in an area where we don't really get any snow, very rare. But when it does, everything shuts down because our city doesn't have the proper equipment (salt, plow trucks, etc.)no one here owns snow tires, and we're all inexperienced. It snowed today around the same time as the drive back home and it took forever because it was rush hour at 5:00 pm (Fairly populated city, around 440,000 people).
Needless to say almost everyone was going super slow, 20-25 mph. Couple of people in SUVs were going fairly fast, but generally everyone was being safe. I saw a couple of accidents but nothing too crazy. I had never driven in the snow before in my LS460L. WOW. that was a stressful and long drive back. What normally takes me 30 minutes to get home took me close to 2 hours. While everyone was going very slow, I went EVEN SLOWER because of how nervous I was.
I felt like I never accelerated too fast or aggressively, and I did slow controlled braking (did not slam my brakes abruptly or anything). Yet every other time where I had to come to a complete stop, the rear part of my car would lose control and slide/slip to one side or another. Again, I felt like I was driving cautiously slow (between 10-20 mph) and did nice and slow controlled brakes. But I seemed to be the only one on the road slipping and sliding when at a stop.
The conditions were pretty snowy, but by no means was it crazy (maybe an inch or two of snow). Something that would be laughable to those who are used to real snow . That was a really scary and long drive. I am glad to be home. and I don't plan on driving my car out in the snow anytime soon.
My 2007 ES350 had a problem with the TPMS where it would flash for the first minute and then stay solid. After checking all 5 tire pressures and resetting the system by using the button under the drivers side dash, I determined that it was probably a bad sensor. Seeing as how they are 7 years old, this seemed reasonable. (I also checked to make sure the passenger side button for the second set of tires was not pushed).
I just had new tires installed at Costco, and brought 5 new sensors for them to install. They supposedly did whatever sensor registration magic is required, but I am still having the same issue. The light blinks for the first minute then goes solid.
What is interesting is that when I try to reset using the button, the light flashes slower (about 1 per second) 3 times, then goes faster (about every half second or so) for the rest of the minute. Is this some code that the system is trying to display?
Also, is there any trick to getting this system re-initialized that I can pass on to the Costco techs when I take it back up there?