Lexus LS 2007+ :: Bumper Removal To Access Headlights?
Jun 5, 2010
I know this may be kinda tacky to some but i keep seeing these audi's driving around and the headlights with the LED DRL's always catch my eye. I ordered a set of led DRL and i want to install them either inside the headlight housing or around the rim of the housing if i cant get the font plastic off. How to remove the bumper cover so i can access the bolts that holds the headlights in.
Headlight assembly without damaging the plastic lens . I've seen some other guys toss a toyota matrix assembly in the oven at 350 for 3 minutes to soften the adhesive and then pry apart the front lens off the housing. Would this work with the ls460 or would it damage some of the internals. I have hid and the movable projectors (afs i think its called)....
View 11 Replies
Advertisement
Taking off? Possibly for a diffuser install or any other reason. The reason I ask is because (now that I am not upgrading to an RCF) we are going to attempt an LFA style exhaust on my current RC F-Sport. We will be starting off using an RCF rear bumper due to there being more room in the area where the stock diffuser usually is.
View 7 Replies
DIY on removing the bumper on the 3IS-F sport
I just received my fog lights from IJDMtoy, but i have no clue how to remove the bumper!
View 2 Replies
I'm trying to access my rear subwoofer in my 07 LS 460 with Mark Levinson. It seems to be blown or ripped somewhere as it makes a loud noise when it hits. Will the top grill just pop off? Or do I gotta do a full removal? If so, how do I get to it.
View 14 Replies
I have Lexus Ls460 (2008), I have paint the driver door, so they removed the door handled and reinstall it after they finished, the problem now, the keyless access from the driver door not working, I can't enter unless I push the unlock button in the remote, all other doors working fine, and can be open without pressing the unlock button. So is their any way to re-program the driver keyless door? or it could be something wrong with the handle installation?
View 4 Replies
Starting to build up some confidence to do my auto dim mirror install myself. How do you remove the A pillar on the driver's side? Is it difficult to do?
Also, in the manual, it says there's a fuse box under the driver side instruments... how do you get to that? Looks like there's a cover to remove?
View 3 Replies
The front bumper on my L is a bit loose. It looks like there's suppose to be a clip there that may have broke off. What this part is? I'm assuming I have to take the entire bumper off to fix it?
View 7 Replies
How do I remove the passenger side rear door panel to gain access to the bottom of the window to jam it in the closed position, 2004 Jeep GC. Window regulator cable broke, window slid down, I pushed the window up & shimmed it with a door stop to keep it up. Replacing the regulator & cable is very expensive & I don't care if the window works or not. I removed a screw from behind the inside door handle & from the grip cup (used to close the door) & pulled the top of the panel about 2 inches away from the door. It appears that something beside the snap-in clips is preventing the rest of the panel from popping off.
View 2 Replies
My front bumper has its paint peeling off very fast, I could get whole bumper painted but is there anything that I can do at home ...
Attaching pictures ...
View 8 Replies
Replacing bumper cover, is there anything I would need to replace underneath it or is it just a simple swap out?
View 4 Replies
How to remove front bumper?
View 1 Replies
I'm having trouble removing the front bumper. Does it remove like the GTI or is it different? I don't have the confidence to pull harder without knowing.
View 2 Replies
I had a low impact accident with my 2010 LS460 where the body shop replaced the bumper cover, collision cushion behind the bumper and a new grill. Below are the picture from their finished work, however I know my car should look better than this. What could be wrong/missing to cause the grill and bumper to not align correctly with my car?
View 7 Replies
I just noticed today that my backup camera now shows part of the rear bumper and perhaps some of the chrome. There's also a strange, small, somewhat circular thing in the upper right corner of the screen. With my Matador Red exterior, I'm sure I would have noticed it before today on the backup camera.
View 8 Replies
I was cleaning the underside of my trunk area and noticed the bolts to the back bumper underneath were spinning freely. Not being mechanically inclined, I thought they needed to be tightened. They didn't tighten. Well that got me checking other panels and low and behold I found a few loose ones.
So, is this a DIY project, or one I should take to the dealership? Since it's out of warranty, I'm fine with paying if need be to get everything tight on the outside of the car. But if it's not too difficult, I'd be willing to try.
If it's a DIY, then what are the steps? I looked around the internet but haven't seen anything.
View 5 Replies
how to remove it.My wife backed into my truck and put a dent in the corner of it so I am hoping i can pop it out.
View 4 Replies
I need to remove the front bumper cover of my Mk6 GTI. I think I know how to do it.
View 1 Replies
How do you take off a front bumper cover on a b5.5 wagon? cant find anything on the internet, I am trying to replace headlight lamps. pictures would be great too.
View 5 Replies
Looking for info on removing the rear bumper cover of a 2012 Passat?
View 2 Replies
I will be installing a Euro-type of hitch to my car and for that the rear bumper needs to be removed.
View 8 Replies
So I am in the process of removing my front silver grill to paint it and was wondering do I need to drop the whole bumper to get it off??
View 16 Replies
