Looking for a fix for the annoying squeaking noise often happening when depressing the brake pedal?
Dealer "bled" the brake actuator...did not work, said I need new actuators for 2.5k.... 2007 LS 460L ....
I just got a used low-milage 2013 LS460, and noticed that every time I tap the break pedal I hear a "clicking" sound coming from under the dash or hood. This seems to happen every time I touch or press on the brakes, at seemingly any speed. It sounds almost like an actuator of some kind... perhaps like the type which allows the transmission to shift out of park. Is this normal, or an indication of a an issue?
View 14 RepliesI have a 2010 Santa Fe w/ ~25,000km. Yesterday, I noticed that after depressing the brake pedal (while driving) i hear a wheezing noise and then a click right before i come to a complete stop. When i am stationary, and i depress the break pedal, i hear the clicking noise but no wheezing sound.
I just took it into service today and even drove around the lot with one of the service techs and he says its normal. That the clicking noise is coming from the shifter release. I don't believe i heard this sound when i bought it, nor any other time till yesterday. The sound is driving me crazy! This cant be normal .... can it?
Just noticed this the other day, when depressing my GF's 2011 Accent's brake pedal it made a low hissing sound, it would go away when you took your foot off the pedal, you would never hear this with the radio on, but it was enough to make me think it could be a concern.
Drove the car and it didn't affect the brake permormance, but the longer this goes, I can't imagine this being a good thing.
Car is 3 years old, and has 80-20 city/hwy driving under it.
96 Aerostar Cargo 6 cyln. Auto.
There is a noise coming from what sounds like the rear passenger side wheel. Also, when you put it in drive and release your foot from the brake the van stays still. You have to push the gas to get it moving, like the brake is holding it. If you are going very slow on a flat surface the van will eventually stop instead of idling forward.
I have removed the wheel, it does turn hard. Pulled the drum (was very hard to remove). Had to move adjuster to remove drum. Cleaned inside, inspected the brake shoes, put drum back on, etc. I am pretty sure that brake is causing resistance. How to resolve it?
I have a 2011 4 door and I drive it VERY LITTLE... I have a company truck so the car sits most of the time but when I get in it to drive on the weekends or whatever, sometimes when I hit the brakes it feels like they stick while depressing the pedal. Its nothing unsafe feeling just annoying and it forces me to kinda slam on the brakes. it seems to go away after I drive it a while, I have been attributing it to sitting so much but wanted to double check.
View 1 RepliesI have searched and heard a lot about the brake actuator problems... but the noise I get is not a clicking noise.
My brakes have a noise when i press the brake all the way down and release it quickly... but its much more of a quick "scrubbing" noise... .almost a "creaking"... is this the brake actuator? or something else? I just recently got new pads and rotors at NTB... and the sound seems to have come after the install. i took it back in and they said they had no clue. Also , they did bleed the brakes when they installed new pads and rotors...
The noise really only happens when the car is in gear lunging. In park it happens one in 10 times as opposed to every time in gear.
Major squeaking noise started end of last week. Could it be the brakes? but no sensor warning light came on! 36K Miles.....
Service at 30K showed brake pads to be okay. I did my own inspection and agreed. I took it to the dealer this morning (I've always had problems with them so I'm used to having to fight and try to get a good price) Dealer says I need Fron Brake Pads (to me they still look okay) and this is what's causing the problem. I'm going to replace them and advised them to drive the car after completion to check the front Drive Shaft since this seems to be a problem with this vehicle.
Concerns: Brake Light sensor did NOT come on. Squeaking noise = Could be Front Shaft.
I love my V8 Treg...one squeak that is troublesome...quickly releasing the brake pedal causes an annoying squeak... what I might do to resolve the issue?
View 1 RepliesI have a 2008 LS460. I have a clicking noise coming from the brake pedal area. It happens in the morning when the brakes are cold. I had the same problem when the car was new, and Lexus put in a new actuator. It was ok for about 6 months, and started clicking again. Maybe 3 or 4 soft clicks when I push lightly on the brake pedal. Every time I take it in to Lexus, they say it has the new actuator, and the noise is so soft that they act like they can't hear it. The car is so quiet otherwise, that to me the clicking is very annoying. I have called Lexus corporate, to no avail. Sounds to me that they have a problem they don't want to admit.
View 9 RepliesA mechanic recently replaced the pads of the front brakes. After the service, the break makes squeaking noise when I release the break pedal. According to the mechanic, it is normal, and I better ignore the noise. Is it true?
View 1 RepliesHappens when I quickly let off gas pedal and engine spools down. Just curious, hopefully no big deal but though I would ask. No maintenance lights on either.
View 6 RepliesI have Corolla 1.6 dual VVTi (year - 2009.), manual transmission, 1ZR engine, for about a year, ~50000miles on clock. About a month ago from a engine part it began to produce sound that can be heard on the accompanying recordings.
For these sounds is characteristic that:
- can be heard only while driving and depressing a gas pedal, its not heard when Im changing rmps while the car is stationary..
-only when engine is warm
-from about 1900rpm to 3000rpm.
-Toyota service is not useful, they fail to locate the source of the sound.
I submit sound recordings that I made by placing a microphone in the motor department.
[URL] ......
2007 SWB all stock. My break squeaks when backing up, specially backing down slope on a drive way. I also notice my right rear tire have tire wears which might be related to vibration at certain speed (like 76-80).....
Should I check the breaks? Alignment? control arms? Maybe time to search DYI on breaks and see if I can do it or not.
Every time when lightly depressing the brake pedal there is a single click sound.
It doesn't not happen when releasing the pedal just when depressing it. It happens in all circumstances (i.e. with the car off, car on, stopped, moving, etc).
I thought it corresponded to the tail lights or the start button light because it happens right around when those lights turn on, but I was able to make it click without having either of those lights come on by depressing the pedal super slow.
I can't tell if its inside the car near the pedal or under the hood near the firewall... But it's right around that area. It seems louder at times then other times...usually quieter when car is moving (probably just drowned out by road noise)
It's a 07 prius with 65k miles. I realized that it is making this squeaking noise while going over bumps "ONLY" when the brakes are applied.
I have 2 toyota dealerships checked. 1st dealer said no noise and 2nd dealer also said no noise... then, i requested to drive with the mechanic and he somehow heard the noise while I am in the car.
I posted a youtube video w/ iphone video if you feel like hearing the noise...
Bought my 2013 GX460 in Dec, 2012...approaching 3000 miles now. Everything is great, however, I have been hearing braking squeaking noise consistently under these conditions:
1) Low speed braking, such as approaching traffic light.
2) Low speed braking in cold morning (40 degree).
3) Low rolling speed, driving in parking garage
No noise under high speed braking.
Is this normal? I googled a little, saying that such noise is the result of high performance brake they put on the GX460.
I have taken it to the dealership and they claim they can't hear anything and I'll have to wait for it to get worse. The noise emanates from the front left wheel well area. It is only heard at low speeds (under 20-25mph) on areas of semi-rough or undulating pavement. It sounds like a loose shock or something....
I've seen on other boards that there have been problems with other Lexus vehicles and the struts, upper and lower insulators, mounts and bump stops.
Requiring that the brake pedal be depressed in order to start the engine can be a nuisance, say if the driver is out of the vehicle and the passenger wants to start the engine to run the A/C, etc.
There is a workaround though. Press the engine start switch once to go into ACC mode, then press and hold it for 15 seconds and the engine will start without the brake pedal having to be pressed.
Replaced my rotors and pads and I still do not like the braking feel as I apply constant pressure to the pedal. No matter what I do, I cannot apply even or consistent pressure to pedal and get the car to slow down smoothly or in a linear way. It feels like some power assist component applies varying force to the calipers no mater how slowly or quickly I try to slow the car down. It just isn't smooth like other cars I own. The brake pads grab fine, no warped rotor issues. Does your car brake smoothly from 40 MPH to 0? Is there some power assist unit that may be going out?
View 2 RepliesI got the attached warning today on my 2010 LS600. The pedal felt a little soft after the warning. It kept popping off and on, dinging every 30-40 seconds.
I checked the brake fluid, it was full. Car has 36k
I had it towed in to Lexus and they couldn't get the warning to come back up.