Lexus LS 2007+ :: 2008 LS460 Won't Start - Warning Lights On
Dec 14, 2014
2008 LS460...
This is what happened... After not driving the car for 3 cold days, the battery seemed dead...so i jump started the car with another car...and the car started, but started showing a bunch of warning lights... It says, check vsc, brake malfunction, check brakes, check abs...
So i ignored all the warning lights and decided to drive the car on the highway for 30 minutes to fully recharge the battery... After driving for 30 minutes with all the warning lights on, i parked the car and turned it off. Then i tried to restart it again after 5 minutes...and it won't start...
Could it be that it didnt charge the battery because of all the warning lights were on? Is the battery bad? I jumped started car again...but it didn't reset, still got all warning lights... Now turned the car off...and it's dead again...
View 14 Replies
Advertisement
A little over a week ago I had my battery go low and set off several brake warning lights on the dashboard. I have a very trusted mechanic and had him look it over. There were no issues whatsoever with the braking system and the lights simply occurred due to a drop in battery voltage. My question would be how to clear the lights. I have seen various people use something called a techstream and was wondering if this would be viable in my situation. If so what is the most updated version of the tech stream as well as a possible tutorial. Below for reference is a picture of the lights that were set off on the dashboard(circled). The dash isn't mine just one that I found but the four lights in question are the same.
View 7 Replies
Battery died and car (LS 460) was jumped started. Every warning light is on how do I turn them off. Car was running perfectly until battery was drained.
View 3 Replies
I have 2008 LS 460 and replace engine oil warning light comes on every 3,000 miles. I plan on changing oil every 5,000 miles. How can I change warning to coincide? What are thoughts on changing every 7,500 if no pulling or hills? I am using synthetic Royal Purple. Is it worth the cost?
View 1 Replies
After doing a Total Brake job on My 08 LS 460 plus Rotors. I got a warning message that my Parking Brake was inaccessible and to see the Dealer . I went back and changed all the Parking Brake Hardware to solve the Problem and I am still getting the same Warming Message.
View 14 Replies
2008 ls 460 won't start when I press brake and start engine button. Car battery is strong. Tried two different keys. Start engine button has green light and when push all dash lights come but engine does nothing. Tried holding Lexus emblem on key next to button and pressing unlock button on key several times. Nothing?
View 4 Replies
What is the procedure for resetting the Oil Maintenance Required Warning Light on the 2007 Lexus LS-460? The vehicle has keyless ignition.
View 14 Replies
My parking assist warning system has suddenly stopped working. (2007 LS460) I'm thinking I may have disabled it while pushing some other buttons or doing something else. I changed the distance to farthest but that didn't work. It was working perfectly last week. I did disable the auto down tilt on the steering wheel. Could this have also disable the parking assist?
View 10 Replies
I have a 2007 LS 460 with active cruise and lane keep assist (LKA). All works fine during daylight hours but if I drive at night I get the yellow Fault Triangle together with pcs warning and instruction to have system checked by the dealer. The dealer says that there are no fault codes showing on the diagnostic system.
View 6 Replies
Where is the fog light relay located in the car? I have checked the fuse and the bulb everything is fine but it wont turn on.
1. Fog light fuse still good (even try to switch to new fuse) the fog light wont turn on at all.
2. Check the connection wire everything is in intact.
3. High beam still working fine using the stalk but fog light still not working. Yes, we can only use fog or high beam, but the issue is low beam and fog not even working.
4. Before the Fog light problem, the driver side fog light is blown. So I replace it with the new bulb. Everything is OEM part there are no aftermarket part or HID .
5. This happen about a week after the driver side bulb blown then all sudden the fog just not working at all.
View 3 Replies
I recently purchased a 2013 LS460 and I'm alhaving issues with my lights turning off.
When on Auto.. Lights turn off after pressing the Lock 2x.
When on On position or parking lights position and I press the lock button twice, it will not turn off. I mean it will stay on for a while.
Check the delay headlight setting in the menu options and it's set at 30 seconds.
Took my car back to Lexus and told them my issue I was having...and they still couldn't figure it out.
View 14 Replies
Car does not detect the keys even after changing the batteries of the keys. what could be wrong?
View 2 Replies
I have an 08 LS460 with 50k miles on it. Most of it city miles. I'm an average driver and not too hard on my brakes. How long should they last?
View 10 Replies
My 08 LS 460 use to have the a/c come on automatically every time. But now, I have to set it manually after each stop or engine turn off. Is it a fuse, sensor or ??
View 2 Replies
I have a 2008 LS460 with 79K miles. Everything on the car is great, except this vibration at idle while in drive. For example, when I stopped at a red light I feel this vibration through the steering wheel, in the driver seat and the passenger side. Now, when I put it in reverse, neutral or on park (foot still on or off the brake and vehicle stopped) the vibration goes away.
View 14 Replies
Car battery was dead, got a new battery from Walmart and replaced.
After that, from time to time, the engine would not start when pushing the start button, sometimes it takes 2 or 3 tries to get the engine to start. This has never happened before.
What is the reason for it, could it be that the walmart battery is not as powerful as the previous LEXUS battery? or something else?
By the way the car is due for an engine oil change with the warning light on. I use Mobile 1 fully synthetic 0w20 and the light went on every 5000 miles.
View 4 Replies
How to remove the side mirrors to access the puddle lights underneath. I ordered some white HID Led replacement bulbs but not sure how to remove the side mirror.
View 14 Replies
Dealer told me needed new control arms as the bearings are wearing out. Was quoted a little over $3k. Doesn't really bother me bc it only makes a clicking noise when I apply brakes hard but concerned about safety issue. Surprised a car like this would need new control arms with only 70k miles on it.
View 14 Replies
I have some FAINT clicking noise at the rear of the 08 LS460 and I'm thinking it's rear bearing going out..but not sure...what exactly does bearing failure sounds like? I hear this SOFT clicking noise from (more likely) the right rear. The noise is very faint and I have to roll down the window to actually hear it.
If I move through the neighborhood at about 15-20 mph, I hear this clicking faint clicking sounds..and if I speed up a little, the clicking noise increases (in frequency, not loudness). When I go faster like on freeway or normal road, I can't hear it anymore. Probably clicking too fast or not as loud at that speed. With windows up, I can't hear it at all.
Is this has to do with rear bearing going out on me or possibly something else? Any recommendation where I can start looking at? Is it brake pads? The car is 35K miles but since it's 08, unfortunately it's out of basic warranty (time). Is this covered under powertrain?
View 3 Replies
Radio controls no longer function. Only the volume and the seek buttons work. Have to use controls on the steering wheel to make any changes.
View 2 Replies
I went to go pump gas and this happened. Had to tow it back home. Battery is a few months old. I also tried putting a fully charged jump box to it with no results.
Gonna hook a scanner to it later to see if there is any code. (Shouldn't be any if it's the starter...correct???)
I hooked up a scanner to the car and found:
P0335 ( Crankshaft position sensor)
P0340 P0345 P0365 P0390 Camshaft position sensor
I guess its safe to eliminate the starter. Do all the sensors need replacing or do you think one particular sensor is causing all the other sensors to go off as well.
View 13 Replies