Lexus IS 2014+ :: What Sensors Are In The Front Bumper
Feb 5, 2016
What sensors are in the front bumper? I slid out on black ice into a snow bank and it crushed in the bottom grille and as I'm clearing out the snow I noticed a sensor dangling with a broken harness that I was wondering what it was for. I have a nonFsport bumper with LED fog lights and both fog lights are operational.
Drivers side close to the fog lights
View 5 Replies
Advertisement
So I've seen a lot of people on here wrapping the mid section of the front bumper black to give it a more aggressive look.
For those that have done this, will I need to cut a hole for the sensors or will the sensors still work with the wrap covering them?
View 9 Replies
So my gf parked at the mall and when she pulled out the front bumper got stuck on the parking divider and came off on the left side. One of the fastening holes appears to be torn and it appears the bumper just needs to be put back in place.
View 8 Replies
I was recently in an accident deemed not my fault, my 250 was in perfect condition otherwise. After the accident when I received my car from the shop, they gave it back to me with the check engine light on and told me it was my O2 sensors. I ran a scan on them and the Bank 1 has low voltage, Bank 2 has high. What could be a cause of both of them to have voltage problems? The mechanics refused to believe the accident had anything to do with it, which is complete BS. I got hit on my passenger side, 11K in damage.
View 1 Replies
How to remove the chrome trim around the fog lights and the chrome bars beside them I have a 2014 SE
View 2 Replies
So when I was washing my car for the first time I noticed that the bumper was damaged. It can be fixed or does the bumper need to be replaced?
View 14 Replies
DIY on removing the bumper on the 3IS-F sport
I just received my fog lights from IJDMtoy, but i have no clue how to remove the bumper!
View 2 Replies
My rig is a 2013 5.0 extended cab. Seems to me that there is some "wasted space" at the front end between the bumper/grille and the radiator. I'm thinking that some sheet metal/expanded metal work or maybe some fiberglass formed to fit that the space could make a neat storage area for stuff like jumper cables, an emergency road side kit and other stuff.
View 4 Replies
Do you need to take off the bumper?
View 2 Replies
How is it possible that the 350 F-Sport can track cars that are possibly coming at you while you're backing up, but it can't alert you to when you're getting close to a wall or other car that is stationary (aka parking senors).. Although I did back into a space yesterday and got no beeps as the car got closer to the other cars in the camera.
Another thing is having radar assist cruise control and no front parking assist... what's up with this craziness? The systems are actually installed in the car, but not able to beep at you?!
View 14 Replies
I got a 2014 F250 SD w/ 6.7 diesel. Since if owned the truck the front bumper has slowly started to sag at both driver and passenger side. Dealer says there is no adjustments for it.
View 14 Replies
Do a 2014 f350 front bumper will fit on a 2001 f350? Wanting to know if the bolt holes and body lines will match up? I put a 2014 rear bumper on and it bolted right up.
View 8 Replies
Remove rear bumper on IS? Wanting to install a rear diffuser myself but don't know where to start in removing the bumper.
View 5 Replies
Have trouble with the drivers side not seating in the bumper pocket? Mine pops out on one corner weekly. I'm not sure if it would come out completely.
View 14 Replies
I'm having the bumper cover replaced on my 350 (stupid mistake on a number of fronts it's starting to look like...) and the indy shop that I chose in my town to do the job (Lexus dealer is 100 miles away and this shop was recommended by the guys that take care of all the Lambos/Ferraris/Porsches etc) told me that they had to drill the holes in the bumper cover to retro fit the sensors. Is this correct?
View 2 Replies
How to remove the rear bumper, I have to drill some holes to install some back up sensors. I rather not but I don't know if anything is behind there.
View 1 Replies
My Excursion had a mangled rear bumper when I bought it recently. I just bought a salvage one to replace it. I had it installed today. I want to salvage the backup sensors in the old bumper along with the license plate lights. How do these come out? They seem locked in there to me.
View 3 Replies
I'd really like to add these to The Beast, but don't want to drill through chrome. My bumper has some plastic running along the top (see pic). Just looking for info for the same bumper mounted the sensors there with success.
View 9 Replies
The front bumper on my L is a bit loose. It looks like there's suppose to be a clip there that may have broke off. What this part is? I'm assuming I have to take the entire bumper off to fix it?
View 7 Replies
I was hoping there were instructions on how to remove the 2010 RX350 front bumper cover somewhere? We had a little fender-bender, and I was planning on trying to replace some of the items myself. I'm handy, but always prefer instructions over trial/error!
View 6 Replies
I bought the car from dealer, there are now FOUR! holes on the front bumper. I don't understand why they couldn't just use the existing holes to put the license plate holder. Now I'm stuck with these holes and I'm looking for a cheap alternative to fill them. I like the clean look of the front end without the plates and don't want to spend a fortune at a body shop, but I also don't want 4 dots either. What I can do/use?
View 3 Replies