I have a blind spot sensor option on ny is, but im curious about where it is located beside the mirror icon. I dont have those visible circle sensors on my rear bumper.
View 2 RepliesReally like the Blind Spot Monitor system in the car. The visual part of with the mirrors works great but the volume part in the car is too low especially with radio on. I'm told by Dealership Service that it cannot be adjusted. I find this hard to believe especially seeing this is an all electronic system. There's got to be a way to have a volume control or menu control on it????
View 1 RepliesI am curious; is it NOT suppose to beep when BSM has detected a car and you try to put blinker on? Mine just blinks the icon on the mirror, which is not nearly as noticeable as a audible sound. Also, what about the backup camera? Obviously, this car has sensors... but why don't the beep?
View 12 RepliesLooking for Blind Spot Monitoring System that can be installed on the GX.
View 8 RepliesWe're looking to buy a 2013 or 2014 RX350 and have a couple questions about equipment. Specifically, is blind spot monitoring standard equipment for either year 2013 or 2014 or is this an option?
If heated seats are listed as an option for an RX does this mean that "cooled" or Ventilated seats are automatically included for years 2013 or 2014? I ask because I've seen "heated" seats listed on Autotrader, but the controllers pictured include heated and cooled. Of the cars, we've looked at they only had both heated/cooled or nothing. We haven't seen heated only.
If the RX does NOT have heated seats, is the leather still perforated for 2013/2014 models or is it solid like previous years?
Is it possible to upgrade my 2010 rx450 mirrors to add automatic folding and blind spot warning? Want to keep the car but would love those features.
View 2 RepliesLately I've noticed the blind spot monitoring light in the mirrors is coming on randomly when I'm driving down the road with no cars around me.
When having my phone hooked via blue tooth and playing music the song will change over the speakers but the screen will still show the prior song I was listening to. Any thoughts?
I'm getting a little concerned that as this car ages all the sophisticated electronics might start failing.
Can't find the Blind Spot Monitoring system under settings. On page 139 of the Owner's Manual it says, "Make sure not to cancel the systems accidentally". And that's just what I've done. Now how do I get this back? And why would there be a way to "Cancel" a feature that can be turned ON/OFF?
View 1 RepliesI have a 2015 Avalon Limited. The BSM works fine during the day, but at night, if I raise the rear sunscreen to block headlights behind me, the driver's side BSM does not recognize cars in the blind spot. If the screen is lowered, everything is fine.
View 5 RepliesIn my 2010 Prius,My wife and I and another friend have noticed a blind spot behind the mirror on the windshield, such that I don't "see" drivers approaching from the right on a "4-way" intersection. I am a cautious driver, yet noticed several years ago that I occasionally started up across an intersection before the car on my right....I didn't SEE THEM.
This is because the mirror is mounted relatively low. I am only 6'1'' but my wife who is 5"10 also noticed this problem. In San Francisco, going down a hill, it is often hard to see a car approaching from the right. I am going to the dealer for something else and will ask that my mirror be remounted.
Having problem with the blind spot detector ( BSD ) been intermittent on and off at times. This is a Santa Fe Sport 2014, has been in the shop two times with the same issue and no results.
View 2 RepliesI just noticed this morning that both rear parking assist and BSD on my 2015 SFS Limited are not working. Other than the button near the shifter to turn off the audible alarm for parking, I don't recall any other buttons or settings that would turn both systems off. I won't have access to the user manual until later this evening. I did clean off the rear parking sensors but that didn't change anything. Am I missing something?? What's common? Perhaps a fuse?
View 12 RepliesI have a 2013 Avalon V6 Limited.
On 5 or 6 occasions, during the 8 weeks I have owned it, a yellow warning light has appeared, together with a message on the Multifunction Display stating: "Check Blind Spot Monitoring System." While this is displayed, the BSM does not work. Turning the ignition off and then on again resolved the problem immediately each time, with one exception, when I had to do it twice. Pushing the On-Off button for the BSM on the left side of the dash did not resolve the problem.
The left side (driver's mirror) indicates and beeps if a car is in the blind spot however, the right mirror works sometimes and then does not. Also, it will "alert" once in a while and sporadically.
First, where are the sensors? Could I unplug for five minutes and let them reset? Second, this almost sounds like a software glitch?
2014 2.4L Nav/tech package.
Need to enhance the rear view of the blind spot, if I install it on the existing outside rear view mirror..
View 14 RepliesWhere the oil pressure sensor is located on a 2013 F150 with the V8 is located?
View 3 RepliesWhat is the location of the Coolant Temperature Sensor? I search but I couldn't find a picture or diagram for our car.
View 2 RepliesI have an 04 gx with a check engine light on I had the code read at auto zone. That tells me o2 sensor bank 2 sensor 1. I have already changed the sensor they said it was and still have the code. What is the correct location of this sensor?
View 2 RepliesThe window sticker for my '07 Passat 3.6 says that the car has the tire pressure monitoring feature. I have yet to find it, and was not under the impression that I was getting that feature when I was buying car. Seeing it on the window sticker a few months after I got the car surprised me.
But so far I haven't found hide nor hair of it. If I had tire pressure monitoring... where would it be?
Where the vehicle speed sensor is located on the 2007 es350. Reomoved battery and air filter box but just can't find it.
View 1 RepliesI actually found headers for my 5sfe and I took them cleaned them up real well and put them on.
The problem I am having is that the o2 sensor space on the headers is for the threaded style sensor and the upstream that comes stock is the bolted on style although the downstream does have the threads.
Can I take the downstream o2 sensor and put it in the slot and since I have put on headers it takes out the cat will this make the car run like crap? also I have tried to take it down the street with just the headers and I had almost no power.
would this be caused by the downstream o2 sensor in the upstream spot and no exhaust other than the headers?