Lexus IS 2014+ :: How To Get Fog Lights To Run Without Low Beams
Sep 30, 2015
Just out of curiousity, is there a way to get the fog lights to run without the low beams?
I would like to have them run when I have the running lights on instead of only with the low beams
(2015 is250 with full led headlights/fog lights)
View 3 Replies
Advertisement
For my 2013 with HID lights, I'm adding a light bar, and trying to find a good wire to tap into so I can wire in a relay to turn the light bar on with my high beams. As it's going to a relay, I originally thought to use a fuse tap, but the high beam fuse is always powered. Any other wire I can use in the cab?
I'm also looking for an in cab wire for the reverse lights I'm adding. I've been trying to make sense of the wiring diagrams online, but I am not having any success.
View 2 Replies
What steps are needed to modify a 2005 RX 330's fog lights to stay on with the high beams? I found the info on the web & did this modification to my 2010 Tundra but can not find any info pertaining to how to mod an RX.
View 2 Replies
2008 Camry Hybrid. Normal lights are dim. Auto on position results in no lights. A turn brings the lights on, but appears to be a "parking" position. High beams OK
The dealership has no clue - they wanted to sell new bulbs. They are barely bright enough to drive at night, certainly not 10% dimmer from age as they described.. (plus the auto on does not work ).
View 1 Replies
Recently got the car and after my first wash, there was alot of water inside the headlight then both my low beams went out. The next day, one of them came back on and i tested the other side with a new bulb but still no luck. What should i look in this situation? 2008 model
View 3 Replies
The puddle lights do not turn on at all on my 15 is 350 f sport. How do I get this function to work?
View 3 Replies
Didn't find anything on this, but I've noticed that on my GTI the Fog Lights stay on when the High Beams are turned on. Which I find unusual since no other car I've ever owned did this (Including my '12 TDI), and as far as I understood, in the US (At least here in NY), it was actually illegal to have them both on at the same time. ?
View 12 Replies
Any way to drive the car with only the DRL LED strips and fog lights on only? Kind of like BMW can run with the halo lights and fog lights. Is there any computer remapping I can do or any rewiring?
View 9 Replies
I'm currently looking for some fog lights. It seems that the iJDMToy lights are popular on here. The only thing I don't like about them is that they're either hooked up to the DRL or the headlights. Hooked it up to a button or switch? If not, are there any fog lights for a 2015 IS350 F-Sport that can be manually turned on/off?
View 2 Replies
Purchased a 2014 is350 f Sport and noticed the led daytime running lights don't match. One side is warmer and one side is cooler in color, could this be a issue with the whole headlight or a fuse? The license plate light too is yellow color on the same side.
View 12 Replies
I want my fog lights to turn on with my low beams when they are set to auto.
View 4 Replies
My garage is dark until I get in the car and push the button to open the garage door. I of course don't lock the car when it's in my own garage, so can the puddle lights be set to come on whether the car is locked or unlocked?
View 7 Replies
I drive a 2014 is250 F sport. My puddle lights don't turn on at all. It was to my understanding that the puddle lights are a standard feature of this car, yet it doesn't turn on.
View 4 Replies
I want to replace the interior reading lights but not sure how to do so. I've taken a flathead screwdriver and popped out the plastic cover and revealed three bulbs. Am I supposed to twist them or pull them straight out? Or am I doing this completely wrong and should i pop out a cover or something?
View 1 Replies
On a 2014 350, how hard is it to change out the puddle lights to LED's?
View 11 Replies
I have a 1984 BMW 733i and can't figure out why the Low Beam lights do not work when the light switch is on. The Low Beams work when the High Beams are on. I've replaced the Low Beam lights and checked the fuses.
View 1 Replies
I've ran into an issue with my high beams on my 07 Camry SE. All lights are working except high beams. When you switch to high beams the lows only stay on. The dash light comes on and shows high beam indicator, but no brights! Fuses look good, and so do both bulbs. Going to go buy a bulb later today just to try. Like I noted they both just suddenly stopped. I'm leaning towards dimmer switch on column now.
View 11 Replies
Yesterday, I went through my car doing a complete LED conversion. I got everything done. And then I replaced my high beams with Silverstar Ultras. I didn't touch my fog lights or my low beams (these will come next.) And then I went and got some wings with the boys, showing off my new LEDs and my bright high beams. We noticed that my fog lights turn off when my high beams were activated. A cool point I never knew about, but, it is extremely relevant in this story.
This morning I went to work, and noticed that my fog lights were not working. So after work, I came home and tried everything to get them working, check fuse in car, and tried every combination of light to activate them. Then I checked the fuse box under the hood, I hadn't actually ever looked in there before. When I did, I noted that the 10amp fuse, Fog R/R was missing... MISSING. I took the spare from the cover and put it in, and bam, fog lights work again.
View 2 Replies
Like on most Chevrolet's or other cars, when you unlock your car with the remote, your headlights come on for awhile. I've tried to 'unlock' this feature with a scanner but the only option I was able to change was the auto lock door function. Is there any way to activate this feature (if possible)? If its not possible with a scanner. I have a '09 Santa Fe Limited, w/ Auto Lights w/o DRL.
View 10 Replies
Any mod that will allow the fog lights to remain on when the high beams get turned on?
View 40 Replies
My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 Replies