Lexus IS 2014+ :: Check Engine Light Came On Due To O2 Sensors
Dec 2, 2014
I was recently in an accident deemed not my fault, my 250 was in perfect condition otherwise. After the accident when I received my car from the shop, they gave it back to me with the check engine light on and told me it was my O2 sensors. I ran a scan on them and the Bank 1 has low voltage, Bank 2 has high. What could be a cause of both of them to have voltage problems? The mechanics refused to believe the accident had anything to do with it, which is complete BS. I got hit on my passenger side, 11K in damage.
View 1 Replies
Advertisement
My check engine light just came on around 7000miles on my 2014 IS350. Dealer says that I need a new O2 sensor. Just wanted to see if this is common and O2 sensor replaced within the 1st year?
View 7 Replies
So I've got 13,375 miles on my car and I was at an intersection and when I put the car into sport mode the check engine light came on and now it won't go off. My car isn't displaying any other messages or lights and the gas cap was definitely on all the way. What could trip it so early in the life cycle, had the last scheduled maintenance 3 months ago too???
View 14 Replies
So I was under the hood and was checking something out and unplugged the MAF sensor for a bit and put it back. Put everything back to the what it is, but now I have TRAC OFF on my display and Check Engine Light.
View 1 Replies
After only 1k miles after purchase my Check Engine light as come on. P0440 and one other (left the paper at work)
I haven't overfilled on Gas, the Gas Cap is completely on (2 clicks), and I haven't OVERLY pushed the car either haha.
The only update was replacing the STOCK filter with K&N Drop In Filter.
View 2 Replies
I have a 2001 Mazda Tribute with 141,000 miles. Recently, I've burned up both O2 sensors causing the check engine light to come on. My mechanic has replaced each and they've burned out again. The head gasket was replaced after that, to no avail. The check engine light continues to come on after being cleared in the computer. I have also noticed that on humid days, the car misfires on at least one cylinder., but any other time, it seems fine. What to check next? My mechanic is at a loss.
View 2 Replies
I have a 1997 ford f 150 with a 4.2 ltr v6 the check engine light came on so i took it to autozone and had the code pulled. They told me that the o2 sensor bank2 sensor 1 which is before the converter had a slow response so i checked the wiring and bought the o2 sensor. They told me bank 2 is the passenger side but well i changed the1st sensor on the passenger side and reset the code and drove the truck about 130 miles . and the light came back on. After reading a few posts. I think they told me wrong is the drivers side bank 2 or is the passenger side bank 2 ...
View 14 Replies
So today during my drive I looked down and noticed my check engine light come on! The car has 7k miles on it!! All I've done to it was the ARK cat back and k and n drop in filter. I'm guessing O2 sensor but it's crazy to think a car with 7k miles had a bad sensor. Noticed the car was running a little rough lately but noting too crazy.
View 14 Replies
I have recently had about $1620 worth of work done on my 2000 4Runner because the check engine light came on and the code was P0420.. My invoice says they replaced the exhaust pipe assembly. Now 2 weeks later the light is back on with the same code...are the 02 sensors part of the "exhaust pipe assembly" or are they now going to tell me I need a bunch (2-4) 02 sensors replaced.
View 3 Replies
I have a 1998 chevy 3500 2wd pickup with a 454 engine. The check engine light is on. I have had the codes read and they were for a MAF and MAP sensors. I have replaced both. The check engine light is still on saying that I have a bad MAF sensor. I replaced it again. The check engine light still is on. What else should I look at to fix this problem??
View 19 Replies
my 92 subaru check engine light has been on for months. I took it to my mostly-trusted mechanic. He hooked it up to the computer and the car did not give any codes. He reset the light, but it came right back on when started. I am wondering about the coolant temp sensor but I would expect that would give a code. Why won't a check engine light give a code?
View 3 Replies
I have a 2014 es300h with 7400 miles. Recently the check engine light came on and the dealer diagnosed an oil control valve and something to do with camshaft timing. They also said something about removing valve covers to clean? Is this a potential sludge issue? They kept he car and gave me a loaner. They also opened a TSA with Lexus. My question is this: is this not incredibly unusual to have this issue with a new car? It almost makes me want to get rid of it before something else happens.
View 7 Replies
I've had the JoeZ axle back installed for about two months now. I noticed that the engine light came on initially when installing but it went away on its own. I got into an accident and after the repairs were done on my car the light was gone.
It soon came back on but i expected it was because my oil change was due
Got the oil change done and the light was off. Couple days ago the light came back on.
I called the Lexus Dealer and they told me that it might be due to the Gas cap not tight enough. Gave it a few twist but light still remained on.
For the past month, I also recently noticed a mildew smell coming from the vents when i start the car but goes away. Does the mildew smell + Check engine light mean that something is wrong with the exhaust?
View 2 Replies
So after installing my JoeZ axle back for about 5k miles I noticed there was an issue. The check engine light was going on but turning off randomly. I finally decided to take the car to the dealer for them to check out. So what the dealer said is that the JoeZ exhaust "direct bolt-on bolts" restricted flexibility and caused leaks in the front cats. He said that the stock exhaust screws had the springs on it to allow flexibility when hitting dips/potholes. With that said, He recommended switching the front two gaskets and using the stock "spring screws."
I was wondering, encountered this problem with the bolts that came with the JoeZ axle back? I bought the JoeZ off a user here and it came with bolts, which i assumed came with the exhaust when it was purchased new. Not even sure if the bolts he gave me was correct, or if i just made the mistake of not using stock bolts.
View 9 Replies
Just had my lexus dealership do the ELF recall. While it was in there I had them check to see why my check vsc light comes on randomly which sets off the check engine light.
They came back and told me that my water pump is leaking, what are the future problems of a leaking water pump?
They said the check vsc light is coming on, in their words is "found center y pipe, gaskets leaking at front pipe, may still need to replace converter pipe." So what does that mean and what do I need to do?
View 14 Replies
I was driving home and all of a sudden my rpms are at 3.5 4k rpm wont shift to next gear. I put in in tiptronic mode and shift it to 8 it works fine. Then about 10 minutes later check vsc shows on dash traction control light is on check engine light is on and the light next to the check engine i think it is the abs light. I havent pulled the code yet.
View 1 Replies
What sensors are in the front bumper? I slid out on black ice into a snow bank and it crushed in the bottom grille and as I'm clearing out the snow I noticed a sensor dangling with a broken harness that I was wondering what it was for. I have a nonFsport bumper with LED fog lights and both fog lights are operational.
Drivers side close to the fog lights
View 5 Replies
I have an' 03 Camry with 46K miles and last week the check engine came on. Turns it was the Arem Sensor, whatever that is, that caused the light to come on and needed to be replacement. So my question is, is that a common problem with Gen5 Toyota Camry's?
View 5 Replies
A few days ago my "Check VSC" warning came on along with the check engine and traction lights being on. I left my car in a parking garage for a week when I was on vacation and the lights came on once I started the car after getting back from my trip.
I have had the "Check VSC" warning before and I fixed it by replacing my gas cap. My gas cap seems fine this time around so I got my codes scanned and the only one that came up was P0300. Having this issue with the 2007 Lexus GS 350? I still feel like it's my gas cap because I bought a cheap replacement last time around.
View 8 Replies
My Lexus was working fine till yesterday, but today when I started (button press) it, it started giving me a Check VSC error and Check engine light along with Slip Indicator started showing up
Took it to Autozone for the codes and got
P0015
P0304
C1201
B2799
View 7 Replies
I got my alignment done at a very reputable tire shop today. But now after the alignment my ABS and Traction control light are on and it says check ABS on the lcd cluster. I was told i need to drive around and it should go away. Driven about 10 miles so far and its still there. How many miles until the light goes away...
View 2 Replies
