Lexus GX 2010+ :: Multi-information Display Blank In Gauge Cluster
Dec 23, 2014
I have very recently purchased a 2011 GX. Everything seems to be in working order, aside from the "multi-information display" in the gauge cluster. While the electronics options screen functions as described in the manual, pressing the menu button results in a blank screen instead of switching to the customization and/or driver information screens.
View 3 Replies
Advertisement
My wife on her way home from work called me to say that the MID screen was blank - not working. I asked if she could drive the car, she could, but the energy monitor screen that she has on usually was not coming on. Her concern while driving was that she could not tell how fast she was going.
Fortunately, just a week ago I had installed Scangauge II in her car and had her convert one of existing gauge to MPH. This is a new 2012 Prius IV that is about 2 months old. I'm pretty sure that MID can't be turned off.
View 19 Replies
Recently, i just bought an multi-information display panel (with touch screen support) to integrate into my RX330 which is a non touch screen NAV display panel.
The 2nd hand multi-information display panel is from a 2004 RX330 and what are the socket behind the display panel meant for.
what is the 4 socket connectors as indicated in the red circle in the image should be connected to?
View 1 Replies
It distracts me too much and I can't seem to get better than 45 mpg no matter how I drive (regular mode mostly highway). Any way to turn it off permanently?
View 11 Replies
I noticed just recently my 15 IS350 F- Sport doesn't have elapsed time in the multi information display. Instead it has 2 different average fuel economy spots under Driver info 1.
I remember seeing it on a 14 IS base, is this something different 15 or F-sport? Is there a setting to get it back?
View 2 Replies
Every day I stop at my mailbox to get the mail. I get out of the car with the FOB in my pocket and leave the car running. When I close the door the car beeps three times to let me know it's still on. This is exactly how my 2010 Prius operated. However, when I get back in the car the multi-information display always changes from the hybrid system indicator screen to the energy monitor screen. I always have the HSI on as default. This isn't a huge deal but it's kind of annoying. Is there a setting somewhere that I can change that I've missed?
View 6 Replies
In my 2007 Prius my multi information display didn't come on when I started it up.
View 4 Replies
I had the basic Entune radio but recently upgraded to the Entune Audio Plus with navigation after talking with a tech at the dealership. I unfortunately don't have the audio tab at all, how to add it to my display. No one at the dealership knows how and they referred me to Toyota Corporate about my situation. Any button sequence that can add or delete tabs on the display?
View 9 Replies
what does that icon or symbol on the left side the temperature on the the multi information display? I only noticed it yesterday when the temperature was around 2'C.I'm not sure if it is a malfunction since I can not see it on the manual.
View 4 Replies
Recently brought a 2015 camry SE and wouldn't you know it, someone pulls out in front of me on the highway within a week of buying it. After getting the car back from the auto body shop, I've noticed that my multi information display has a blank screen. Didn't notice that before the accident. The first 3 screens I can set up as I want, the 4th screen is tire pressure and the 5th screen is blank. I've tried to find out what the 5th screen should be but I haven't been able to find an answer.
View 2 Replies
Not the usual. I stopped on my way home to get gas tonight when the gauge was showing one pip. Naturally it wasn't low, but I'm used to that.
The odd thing is that after I got in the car and turned it back on the gauge stayed at one pip and the fuel display on the multi-function display didn't reset.
View 2 Replies
Every time I go to the traffic information map it's a blank yellow screen, my weather map works just fine.
View 3 Replies
The instrument cluster screen in my 2004 phaeton suddenly stopped displaying anything today, I've tried removing and replacing fuses but still nothing, not even the backlight for the display is on, everything else is working fine its just the display. I need the car for a 600mi trip in 2 days.
View 3 Replies
Started my 2013 RX this afternoon and it indicates these two alarms on the instrument cluster, Engine Check Light & Track Off. Found out that my gas cap was not tightened (let my son fill the tank when he borrowed it the night before). Hooked up my OBD II scanner to clear and it shows two codes P0441 & P0445. They reset but my scanner says they are permanent. What does that mean? Will stay as an error until the ECU says otherwise?
View 13 Replies
I came across a post where someone said it was possible to add a gauge/setting to the blank "gauge display" screen. I've searched and searched but can't find the post. Ho to add to the gauge display blank screen.
View 14 Replies
When I have my daytime running lights on, all is fine. When I switch to anything else on the stalk, including my night time head lights, it goes off, along with some temperature control background illumination. Only the shift icon stays on the MID. When I switch back to daytime running lights, everything goes back on.
View 6 Replies
Went to a meeting one evening last week with my 2010 Prius, everything working well. After the meeting we drove away and noticed that most of the dash display was "dark". Driving home and feeling a little gloom as I wondered what it might cost to fix the display problem.
I noticed the poster announcing the meeting we attended was laying on the dash and was pushed up to the display screen. I pulled the poster back an inch and the display came back on !! Pushed it forward and when it got within 1/2 inch of the display, it would blank out ??
It appears the dash display is some sort of bottom projection system to the display screen. Pushing anything up to the display screen blocks that bottom projection and blanks the screen.
View 3 Replies
While traveling speedometer and fuel level indicated blanked out. No other problems--I could see our speed by using GPS.
Toyota service said a circuit board was burned out. I searched and found numerous such problems with 04 up to 09 and eventually (in 2012) Toyota initiated an extended warranty to cover replacement of the board.
View 19 Replies
I got in my 2010 Highlander and started it and the small display screen that shows gas milage, air temps, time, temperature. etc. just went white. It appears to have light behind it but will not display anything.
View 3 Replies
I just got a 2009 570 with rear entertainment, It opens and closes on command when prompted from the front screen and when i use the remote control, it also tilts at various angles but that's all I get from it. it is completely blank. No display whatsoever just tilts, opens and closes. I have a DVD loaded in front. Its a Mark Levinson system the DVD plays fine on the dash screen when I put the parking brakes on but the rear screen remains blank I would call it dead if not for the fact that it opens and closes.
View 1 Replies
Little background, I have a 2005 Prius that i've had since 55K that now has 114K on it. I have never had to replace the battery so it could possibly be that but this morning I received the red exclamation and this weird D symbol.
View 5 Replies