Lexus GX 2010+ :: Car Stalls On Quick Reverse And Shifted Back To Drive
Sep 29, 2015
At the airport made a wrong entrance and notice it so fast, therefore, did a quick reverse and shifted back to drive, but the car died on me. It took me a little while to see what is happening and start the engine again, but the cars behind me were not real cooperative.
View 1 Replies
Advertisement
First time Lexus and RX350 owner. Not familiar with the new type of shift gear. When I shifted the gear from Park to Reverse straight down instead of moving to the right first, the vehicle would jerk and make a thud sound. Not sure if this would have damaged anything. After I have get used to moving the gear to the right first before shifting down, I would still sometimes have this jerk/thud. But if I do the whole shift movement (shift the right first) real quick then the chance of getting the jerk/thud is much less. Is it a manufacture defect or just I am not doing it properly?
View 5 Replies
When I drive over quick choppy bumps in pavement I get a rattle in the rear of the suspension, but only when the bump is on one side. When the bump is long and activates both rear wheels, like a speed bump or a large road crack I don't get the rattle.
The sound seems to be worse on the right side and I can't really figure it out. Anything specific I should look out for?
View 14 Replies
So when I got my car a couple months ago there was this problem where the backup camera wouldn't come on every now and then when I shifted into reverse so I decided to get it fixed under warranty. the dealership said the problem had to do with the whole infotainment system or something so they gave me a whole new center console and navigation screen for some reason but after I got my car back a couple days ago it was working fine up until today where the back up camera won't even come on at all anymore. I've driven the car about 5 different times today and the backup camera never came on once.
View 3 Replies
I am not the sharpest tool in the box. I was driving my 1979 f250 with a full load of fire wood going about 45mph when I shifted it from drive to reverse (I thought I was in 1st) the truck mad a loud whining sound then refused to go on. Now when I shift it in gear it feels like it wants to move and if I revved up high it will rock back and forth. A friend jacked up the rear end with the wheels off the ground the tiers spun in all gears including park and I was told they could stop the wheels by hand with the car in drive. He then took the cover off the rear end and found it to be low on fluid but no signs of damage. What I broke?
View 9 Replies
One of our trucks, 2004 F350 Powerstroke, my company truck, recently the last snow even we had, my tow haul mode would pop on and off almost evertime I shifted from drive to reverse while plowing. I didn't want it on, it just kept poping on and off. Thought maybe the button was stuck, but it moved like normal. My other thought was there is a loose connection in the shifter or column causing it to go on and off.
View 6 Replies
I have had my 2010 Prius since August 2009, and have never experienced this til now.
I had pulled into my driveway and was talking on the phone using my factory-installed bluetooth speakerphone. When I power the Prius off while doing this, the call is in limbo for like 30 seconds before my phone's internal speaker picks it back up, so I put the car in Park and sat there talking.
I talked for about 10 minutes. Suddenly, the car started creeping forward and I hit the brake pedal. The car had shifted from Park to Drive.
No harm was done, but from now on I'm going to engage the emergency brake too.
View 4 Replies
Any way to adjust how much the outside mirrors tilt down when the car is shifted into reverse? I have looked in the Owners Manual and I can't find anything that addresses this. I feel like there must be some adjustment since sometimes the mirrors tilt a lot and sometimes they tilt just a little.
I have tried shifting the car into reverse and letting the mirrors tilt and then adjusting the mirrors with the adjustment controls to the preferred tilt angle, but they didn't retain the memory and went back to the previous tilt settings.
View 4 Replies
I have a 2015 Lexus rx 350 it is not all wheel drive. When I put the transmission in drive or reverse I have what I would call a double engagement. It feels like it is going into gear twice. It does not slip it shifts smooth.
View 1 Replies
My backup camera stopped turning on when I put the car in reverse. Why? I'm thinking it might be a fuse issue, but I can seem to figure out which fuse from the information in the manual.
View 9 Replies
This morning when I shifted to drive mode, the door locks remained unlocked. When I parked the car and tried to lock by touching the door handle, it didn't lock. Then I tried using the hand remote and it didn't. Finally, I had to manually lock each door. 2010 ES350....
View 8 Replies
I have a 2010 RX and I've recently noticed every time I shift from Drive to Reverse and vice versa there's a squeaking noise coming from the shift stick. What this could be and if there's an easy solution?
I'm not due for service or an oil change for another 5,000 miles so I'm hoping it's not something I need to address immediately. Do you think it would be safe to wait until then?
View 1 Replies
I recently leased a 2013 RX 350 and started hearing a weird loud noise almost in the first week itself. It seems to happen whenever I shift the gears from Reverse to Drive. The loud noise comes from the back of the car and anyone sitting in the car (speakers turned off) can hear/feel it. It seems to be worse in the morning (or when the engine is cold).
I took it to the lexus service center and the person told me something about differential pressure, which I really didn't understand:-). However, he said nothing can be done and its not a safety issue and sent me back home without any fix. I have driven many cars in my life so far and never ever came across something like this. Is it something normal at all?
View 14 Replies
I have a 2006 Chevy cobalt and am currently stranded with my husband. Last night as we were about to head home from visiting family 3hrs away, we got off at an exit and as we were stopping about to go again because the light turned green, the car stalled. We had to start it a bunch of times just to get it to the nearest gas station about an eighth of a mile down the road. The message on the dashboard said "engine power reduced". We looked up that message online and a few posts said to disconnect the battery. We did that a few times but when we went to go, it kept doing what it did before, stalling. We were almost to the road and decided we weren't going to make it so we put it in reverse and it drove just fine back to a parking spot. Why it would stall idling and in drive but not in reverse? We are baffled and currently waiting on a tow.
View 3 Replies
I recently bought my grandfather's old F-150, its a 1983 model with the 351w and the 7200VV carb. I replaced the distributor cap & rotor, plugs, wires, and fluids. The truck idles just fine in park/neutral, but when I shift it into reverse or drive, it stalls out. There is a valve of some kind attached to the carburetor, and it opens and closes rapidly as the truck dies (in time with its sputtering) so I think it may be the cause of the problem. I have not been able to find much info on that carburetor, but I think that valve is a fuel temperature system that meters the amount of fuel going to the carb depending on is temp. Can I replace that part without having to replace the whole carburetor?
View 10 Replies
Lately, I've noticed that my car starts fine in cold weather. But, once I put the car into drive or reverse, it stalls. Also, once I start the car let my foot on gas for few min, and then put into drive or reverse, it drives fine.
View 4 Replies
This is a 1991 Volvo 240 Automatic Station Wagon. The Check Engine Light has been on for at least 6 months, the timing belt was replaced 3 months ago , the battery is a month old, the oil was just changed, gas tank just filled and the odometer stopped at 259,000 miles before I bought it so it has well over 300,000. Yesterday morning it took a minute to start, which happens on occasion, but backed out and drove about a mile and stalled at a stop light. It finally started, after 6 false starts, and I turned around to go back home. It then stalled again but reversed just fine, so I got it turned around and drove in reverse the rest of the way home. It drove fine after a few hours but did the same thing today.
View 13 Replies
My 2003 escape stalls from park to reverse and drive,not all the time but when warmed up. IAC motor replaced and still stalls.
View 7 Replies
I recently bought my '05 Elantra from a small dealership and I'm starting to see a problem with it. If I shift into reverse and then go back into drive, the car doesn't go forward at all. I have to mess with the gear shift a bit to get the car moving. I'm pretty sure it's a bad linkage. The dealership I bought it from said it desperately needed motor mounts when they got it so they replaced 2 of them. I'm sure the problems are related. I can't find any information on replacing it myself though.
View 1 Replies
Start the car, turn to steering wheel 30 degree to the left and quicky turn the steering to the right, i can hear some knocking sound from steering wheel or steering column, when I drive on bumpy roads, i can hear the rattle sound from steering wheel or column.
View 2 Replies
2002 LS V8 162K Miles. Its been sitting in the garage for 10 days. ...went on vacation. Started her up and let it idle down. Shifted to reverse and transmission shift error displayed. Went back to P. Waited a minute. Shifted again and she was hard jumping into the gears. The error went away. Drove it around and it seems to shift fine. Opinions?
View 4 Replies