What does it mean when the ac button blinks nonstop? I replaced the ac air filter behind the glove box which was filthy but ac still doesn't blow cold air.
View 1 RepliesAccording to the navigation manual (attached), the navigation screen should go to the home screen within 5 seconds. But my IS never goes to the home screen without pressing the home button, but it always shows the full screen map. I tried many different things including "Auto Screen Change" setting but nothing seems to work.
2015 IS250 AWD
Nebula Gray/Stratus Gray
My navigation screen shows vertical lines, climate and audio works fine , but when i hit navigation button , screen shows vertical lines
Like this pic : [URL] ....
In sunlight my Nav screen is unreadably dim. Is this normal? I just got this 2005 GX, my first, this month and have not had the chance to compare it to others.
View 3 RepliesJust picked up an '05 with the Nav/ML. Everything seems to work, but the navigation screen is painfully slow to update while driving. Sometimes I will be several blocks (1/4 - 1/2 mile) before it catches up with where I actually am. This doesn't seem normal, but figured I'd ask here... is this normal?
View 12 RepliesYesterday as I took off for work, I noticed no map on my nav screen. Below is the message I am getting. This is a 2004 and my guess is the nav has never been updated. I bought the GX 3.5 years ago as a CPO.
View 9 RepliesI was recently in a rear-end crash. The body-shop presumably disconnected the battery, fixed the rear door, and then re-connected the battery.
Now, however, the Navigation screen just flickers.
If I press Info, Audio, or Climate, the screen is just fine
If I press Menu, Dest or Display it flickers.
(Curiously, if I press Info, Audio, or Climate AND THEN press Display, the DISPLAY is fine)
Took it to the dealer, who said it was a coincidental to the body-shop repair.
Do I have to press a button on the ultimate lockpick every time I want to use the navigation while in motion? If I do have to press a button is there any module out there that will allow me to use the navigation while in motion without having to press a button?
View 9 RepliesRight now it doesn't chance background shade when at night time, it always stays white.
How to change so that it automatically changes to black when in night time ?
How to disable the "I AGREE" button that appears every time the car is started? I have seen other posts that refer to this issue on other non GX models, and take about putting the system in "simple mode" by pressing the SCAN button eight times, then the REPEAT or another button after that. I have tried this on my 2006 GX but with no luck. After I put the audio system into CD playing mode, I press the SCAN button repeatedly and quickly but all it does is scan the audio tracks.
The only other thing I know about my GX is that it is still on its original nav software, and is scheduled to receive the update which my Lexus dealer says is coming out in October. Not sure if this affects its ability to bypass the "I AGREE" screen, or if the software update will affect it either.
One of my taillights stopped functioning last night on my drive home. The "check lights" message came up on screen, accompanied by a loud warning chime. However, it wouldn't stop. It kept flashing "check lights" over and over, and kept repeating the chime every few seconds for my entire ride home.
This morning, everything seems to be OK. The taillight is still out, but it's not chiming repeatedly (at least for now). What caused my Phaeton to freak out like that?
Diagnosing different minor problems with my sc430. Tthe lastest one is that my navigation screen will not tilt back so the cover will go over it. It seems like its tilted forward all the way. The screen still works and all. But the tilt button does nothing and its too far out for me to get the wood grain cover to go over it. Is this a common issue? and whats the remedy?
View 10 RepliesCan you customize the Navigation Home Screen? Is it possible to do it on the 2015 Lexus LS 460 ?
I find it strange that my navigation home screen has the dealership name and logo on starting up the car so I figure that it could be set or change.
Is there a video or guide on how to do it? I want to put my family picture as the start up home screen.
At each car startup, after the navigation loads, it eventually settles on the map screen. Would prefer my personally adjusted home screen (the home button nearby the mouse) to just automatically appear on starting the vehicle. Is there a way to do this?
View 4 RepliesI purchased a CPO 2013 RX350 recently and just noticed that it has some scratches in the navigation screen (only seen in certain conditions when black and not under power). I am scared to try any compound on it.
View 4 RepliesIs it possible to turn off the display screen for the Nav system? I mean turn it completely off, so the screen is dark.
View 3 RepliesFor the past few days, every time i turn the car ON (with the headlights ON), the nav screen, clock and surrounding buttons illuminate as they should, but after ~3 seconds, the illumination for the surrounding buttons and clock shut off.
Also, the touch-screen functioning and surrounding buttons do not work at any time. The nav screen remains illuminated, however the touch-screen buttons and surrounding buttons do not work. If i turn the car off and restart, same thing; all lights illuminate for about 3 seconds then stop.
During the day with no lights on, the clock will illuminate for ~3 seconds, then shut off just like above. None of the surrounding buttons (climate, map, infom audio, display, etc) work at all.
What would cause this unusual condition? I feel like if a fuse were blown, it wouldn't work, period. But, the lights illuminate for a few seconds before shutting off.
The emergency flasher button works and illuminates always, and the passenger airbag lights do, likewise. I pulled the nav unit from the car and checked all cables, and they all appear in place.
I can communicate with the car via the voice commands, but that's it.
what might be causing these strange symptoms?
Yesterday I noticed my nav screen stopped responding but partially. It'll let me press buttons on left side but not right side. Unfortunately the "I agree" is on right side so I can't even get passed that screen. I don't use the nav but I'd rather have the map showing then "Caution...."
View 2 RepliesThe car is about a week old. Today, the NAV system (ML version), re-started a few times and then shut completely off. Re-starting the car does not work. Got a totally "off" screen and no sound. 2014 350?
Is there some way to reset it or turn it back on? I can't imagine that a brand new Lexus would have this sort of issue.
I took my SC430 to the Lexus dealership to get my passenger side air bag replaced due to the recall. I decided to have them work on my car by getting the oil changed, replacing a dead foglight bulb and checking on my navigation system.
I told my consultant that the nav will not work after I press the "agree" button on the screen and it just freezes. Later on, tells me that there's something wrong with the ECU chip and.
I got my car today and am a little annoyed. When the car is started the navigation turns on and displays my Dealerships Name and Picture. Is there any way to get this removed and do I have to go back to have them take this off?
View 12 Replies