Lexus GS 2006-11 :: VSC And Check Engine Light Came On When Car Started
Apr 28, 2014
This and the check engine light came on when I started the car this morning. Its an 06 GS300 with just under 53K miles....
View 5 RepliesThis and the check engine light came on when I started the car this morning. Its an 06 GS300 with just under 53K miles....
View 5 RepliesI was driving home and all of a sudden my rpms are at 3.5 4k rpm wont shift to next gear. I put in in tiptronic mode and shift it to 8 it works fine. Then about 10 minutes later check vsc shows on dash traction control light is on check engine light is on and the light next to the check engine i think it is the abs light. I havent pulled the code yet.
View 1 RepliesA few days ago my "Check VSC" warning came on along with the check engine and traction lights being on. I left my car in a parking garage for a week when I was on vacation and the lights came on once I started the car after getting back from my trip.
I have had the "Check VSC" warning before and I fixed it by replacing my gas cap. My gas cap seems fine this time around so I got my codes scanned and the only one that came up was P0300. Having this issue with the 2007 Lexus GS 350? I still feel like it's my gas cap because I bought a cheap replacement last time around.
I just bought a 2006 Subaru forester with 130K miles. Recently, the check engine light came and at the same time the cruise control started flashing. I brought it to the mechanic who said I had a bad catalytic converter. The car seems to be running just fine and now a day later the engine light is off.
View 3 Replies2006 F150 Triton 5.4 Motor... It's been over a months journey with fixing this truck....
How it started: had an oil change, a while back, on long drive after, check engine light started flashing as I accelerated up hill so I pulled over and in a while it was ok, but couldn't get on the gas too much, or it would cause that flashy light thing.
So fast forward to now, after driving it with an intermittent miss for a while, was driving it to work and the miss became a shudder, and she stopped going over 30-40, and runs extremely rough.
Steady but loud idle.
Replaced all plugs with motocraft plugs and new coils all around. No change.
Finally hooked it up to a computer and got random misfires, now it's saying
P0174 bank 2 too lean,
But it's bank ONE that's the only side misfiring.
Here are the freeze frame details:
Frame 1 Mod $00
MIL Status Off
Troub Code P0174
Abslt TPS 24.3%
Eng speed 1665
Baro PRS 71 kpa
Calc Load 100%
[Code].....
2006 gs 300. Been driving car around and the 3 lights came on which are vsc, Trac and check engine light all at the same time. Replaced the 2 front O2 sensors but the light keeps coming on and off. When I drive the car the car hesitates to go over 25 mph.
View 14 RepliesVSC, Check engine light just came on my 2006 GS300. I only have 50k miles on it. I had this happen a few years back and it was the Gas cap o-ring. This time I changed the gas cap and reset the codes but no luck. After starting the car, with a minute the lights come back on. So checked the code and here is what I'm getting:
P0031
Heated Oxygen
Sensor Heater
Control Circuit Low
Bank 1 Sensor 1
Doing a search for the code yields this: [URL] .....
Changing the sensor vs. checking something else that might be the issue?
I have 2006 GS 300. Check Engine and VSC Light came on after car wasn't shifting properly. The codes are P0761 and P2714. Dealer claimed transmission fluid was low said they drain and refilled the fluid. Transmission does not have a leak, so I didn't understand why they claimed the fluid was low. Car ran fine for a day then issue came back. The codes refer to shift selenoids.
View 14 RepliesBought a 07 GS450h w/ 82k on it last week thursday. car was serviced at 1 dealer it's entire life and battery was changed before I took delivery. After 100 miles of driving check engine light came on and i read 10 codes.
The codes are:
P0300 multi cylinder misfire (6 times)
P0301 cylinder 1 misfire (2 times)
P0303 cylinder 3 misfire (2 times)
Am I just looking at a simple spark plug change or is there something in particular I should look for? Is it worth the effort of bringing it to the dealer to repair?
Just bought 2007 Gs 350 in Dec 2015 with 60k miles. The other day I filled up with gas and drove to work. On the way home check engine light started blinking, check VSC appeared on display screen and traction light came on, car ran rough, and wouldn't accelerate. Got home and searched the net.. So I removed gas cap... No change.. Then removed neg battery cable for 10 min. Fixed problem for about 10 min. Then it all happened again. Next morning took it to Lexus dealer. The rep called and said it gave misfire cylinder 3. They said they checked valve springs and they are good, exchanged coil pack with different cylinder and still misfire #3. He said has to be injector so they want to replace injector ....
View 8 RepliesI have 07 350 and my check engine light is on, i had it scanned and they told me that the code is BP0013 and bank 1 Cam position sensor is bad. What that code means and where is that sensor located???
View 9 RepliesI have a 2006 lexus gs300 rwd and my check engine light came on the code P0021 and the check VSC light is on as well and a knocking noise i checked my engine level and seems to be fine but thats just because im always adding oil since its burning a quart every 500 miles which is a lot so whats going on here? Also my idle seems to drop when at a light any one know about recalls on these cars?
View 4 RepliesDriving down the road today and all of a sudden the car loses power, starts vibrating and the Check VSC and Check Engine lights came on. I pulled off the highway and got the car stopped and engine shut off. I let it sit for about 5 minutes and started it up and all warning lights went off and I was able to drive the car home with no adverse effects. Seems to be running normal now. Searched the archives and saw numerous posts about a loose gas cap, but this was something far more serious.
View 13 RepliesWhile I am driving the car it will start to die and skip. Happens randomly. Today I was driving up a small hill and it went quits on me started lurching with check engine light coming on and off. The car will turn over and start, but only for a few seconds before dying again.
Seems to happen when the car is running for a while. Also the ABS light flashes on then off randomly while driving sometimes although It hasn't been an issue. Will be checking tomorrow to see if it starts.
Was trying to change my reverse light on my 12 camry. I wanted to make sure the bulbs were working before I put everything back together. I put on the emergency brake put the car in the on position and put the car in reverse. Went to check the bulbs and nothing. Put the old bulbs in, nothing. Started the ignition and noticed that the the check engine light was on and also the P, R, N or D was not showing in the display. Let the car sit for a while and still the the same thing. What happened. All other lights work fine.
View 1 RepliesLets start at the beginning. About two weeks ago my girlfriend got a check engine light and the car started missing( 98 Passat 1.8T, 5 speed). Checked obvious things like fuel delivery-good. Pulled coil packs and had no spark on #2 cyl. Investigated more and found one of the pins on the ign. control module was shorted. Felt pretty sure that was the problem since everything else checked out. Ordered a Huco installed it and that fixed the problem except the car seemed slow reprogramming to the new part. I disconnected the battery to clear the memory and that seemed to do the trick.
About 2 weeks later my GF is coming home and fortunately it died in front of the apartment. Checked everything again. Getting fuel, no wires shorted on ign. or fuel harness plus they all get power just no signal when checking with an LED tester. Ign. module was good also. Checked speed sensor for resistance per the book it was good. Tried a new Camshaft Pos. Sensor hoping that was the problem, no luck. I believe it must be the computer. I'm trying to get one from a salvage yard. I don't know if the old computer can be reprogrammed or not. Also was wondering if the dealer(where I really do not want to go) can test the computer somehow and tell me if it is bad or not(don't know if I would trust them anyway), just wanted to include that option.
My mother in-law has a 94 Chrysler LHS, 3.5 V6, auto, 66k. Yesterday she was driving home and said the check engine light was on. I went to check it out and the light was not on. The light come on when the key is turned on but goes out when it is started. This is not an OBD-2 car it has a little blue plug and i do not have a code reader for it. Took it to auto zone and they do not have a code reader for this car. Auto Zone and Pep Boys both told me that if the light is off there will not be a code. Further checking on the internet I found out you can get a two digit code by turning the key on and off and count the flashing check engine light. It worked I got code 12 and 51. 51 means lean O2 sensor. If this is true that why does the CEL not stay on. How can I test the O2 sensors?
View 2 RepliesI was driving home on the highway, and my 2006 Elantra did the following things in this exact order:
-Heater started to blow out ice cold air
-Temperature gauge rose, dropped down, and then rose right back up to the red area and stayed
-As I was slowing down to pull over, my tachometer dropped to 0rpm
-My "Check Engine" and "Battery" lights came on
-The car completely died and came to a rolling stop on the shoulder
I am trying to find answers as to what has happened to my car.
I've got a problem with a 2000 Impreza 2.5RS 5spd. It started with the check engine light coming on. A trip to Auto zone revealed that the O2 sensor was the problem. But on the way home, the light came on again and started flashing. All the while the car started acting like it had a misfire. It idles really rough and the exhaust smells like it's running really rich. I've replaced the plugs and wires, and all corners of the ignition coil check out properly as well. Can the O2 sensor cause a misfire in one or more of the cylinders? Or is something else that I should be interrogating as the cause?
View 5 RepliesI have a 1996 chevy caprice wit a 4.3 v-8 one day i was driving and the car started acting funny and the check engine lite started blinking i had the codes read and 0p300 came up saying multiple misfire so I changed the plug wires they all connect in the front around the harmonic balancer well that didn't work its still saying multi misfire so I took a spark plug wire off of the electric dis block and no change in motor now I don't know what to do...
View 5 RepliesMy check engine light started blinking on my 2000 grandam se last night and it was missing bad and now it wont start what is it.
View 13 Replies