Engine ticking not there when its cold but when it warms up, it gets louder.
I took a 3 hour drive to Memphis, TN and when I got there, the ticking was gone. it sounded like it brand new with 0 miles. I opened up the hood to see maybe it just quieted down but no, it was gone. if you put your ear to the engine cover you can hear the direct injection but faintly.
check the video - Ticking 08 gs350 awd - YouTube
Came off the highway just now and there's a tapping sound coming from the engine. It's louder than the ticking these engines make so believe me it's nothing I've heard before. No codes, no overheating and doesn't seem to be anything else wrong. I am due for an oil change soon and I'm wondering if that could be it?
The engine wasn't cold obviously. I did shut off the car and then back on and it still did it. Just want to make sure my engine isn't going to explode anytime soon!
Have a 2006 Sonata GLS with a 2.4 mileage has rolled over 207k .... I started hearing a slight ticking noise from the top of my engine and it has slowly gotten louder, now it can be heard inside the vehicle and more so when revving the engine...it also has 2 stored codes P0011 and P0456, I'm not too concerned with the evap code at the moment, I have decided to replace the oil control valve and clean or replace the lash adjusters...here is my problem, I have mechanic experience but only on Honda, all the youtube videos I have found for valve lash adjustment or replacement are for Mitsubishi and chevy engines, so I am not sure what the adjusters actually look like on this engine and if I can even do them without removing the timing chain.
View 14 RepliesAlright so my car is up to 112k miles, other than oil change, a battery,tires, and a new ignition (tumblers fell apart somehow) its had zero maintenance really done to it. Which I know, this means its long over due for things like spark plugs, timing belt, and other mic. stuff. Its almost all highway miles, and really has no problems. I haven't put much into it because it hardly gets driven in the summer since I ride my motorcycle. The only issue is that Indiana has had a lot of rain this year so ive been driving it more.
The Problem- for months now its made a light ticking sound on start-up for about 30 seconds, and it fades away. If I rev the engine the sound gets faster, but still takes time to go away. As of Recently, the sound has gotten louder for about the first 10 seconds, and I'm worried it may become a serious issue and leave me stranded because I drive about an hour one way to work every day. So before I start throwing parts at it, where should I start?
Timing belt?
Valve Adjustment? (not sure how to do this but I'm sure there is a guide)
Plugs?
No I'm not running a FRAM Filter, its a Mobile 1, with full synthetic oil changed about every 6-7k miles. I plan to do the belt and spark plugs as soon as I get some consistent time off, but that may not be until it gets cold again.
Year of vehicle: 2007
Make of vehicle: Mazda
Model of vehicle: 3i Touring
Mileage/Kilometers: 80,000+ Miles
My Mazda 3i has been acting up a bit lately, where the engine has been getting louder (particularly in 4th gear, though it's a pretty quiet car so I might not be able to tell in lower gears). This morning, there also was a faint ticking, 1/second or so that went away once the car warmed up.
Recent work that has been done to it: Brakes replaced, Oil changed, fluids topped off.
My '07 I4 has 92K on it, I have only owned it for 450 miles of that. It has a bit of a rough idle sitting at a light, but fine otherwise, it did stall on me once at startup. I put some Seafoam in the fuel tank and ran that entire tank, I now have regular gasoline in it. The rough idle isn't any better but I have another issue.
The day after putting in the Seafoam, on a cold startup (36 degrees), I had a lot of valve/lifter/injector/VVT ticking, not sure which. It was worse that one time and it lasted for the first 4 miles of driving and only ticked when I was under load, not at idle.
As time has progressed I have no serious ticking, but it does make a louder ticking/rattling/clacking, whatever you want to call it, until it warms up, about 4 miles.
I heard reference to VVT issues or VVT gears, I'm used to my '06 Tacoma V6 and I know nothing about this issue.
Having shifting issues with their 350? I have a 2014, AWD F-sport and ever since I got it about 4k miles ago, it's been sluggish to up-shift until the engine warms up. It commonly takes me 2 or 3 flicks of the paddle (or stick) to upshift into any gear and this is during very easy acceleration too (I would never romp on it until the engine is fully warmed up).
I would at least understand if it was on downshifts as maybe a way to protect the engine from revving too high when it's cold but it's actually doing the opposite by temporarily preventing me from lowering the revs. I've also always had a car with a manual transmission so I don't know if this is typical for shiftable automatics or not but it seems weird to me.
In my 2007 Sonata, I hit a poorly placed high manhole cover in a dip in the road, in the dark, going 30MPH, whacked it good before I could adjust...
I then pulled the car over, it seemed to go dead, then the car did crank back up, the engine sounded much louder, like a loud rev/hum, not quiet like usual.
I next drove a mile to a c-store, transmission seemed OK, no leaks, did see a check engine light briefly, but it disappeared. Car cranked OK, headed home, same sound right at cranking and at moderate speed.
Finally, I jacked the car up on the front left, from research appears that the plastic engine shields got smacked good along the front and near the right tire and bent back quite a bit on the left side. There seems to be no other structural damage that my untrained eye could see, just one indention you'll see in a couple of the photos that I think is part of the car design at that spot.
Again, no leaks, no smoke, no caution lights of any kind now.
Photos are attached...
My Hyundai's engine now sounds like a Mustang! Hoping it's just the engine noise from these plastic covers now being bent/destroyed in some spots, exposing the engine and the typical noise you'd hear without them...
I bought a new 2014 Elantra last Monday. Around 100 miles (Wednesday) I noticed it was making a ticking noise when accelerating. The sound gets louder at higher RPMs and goes away when I get off of the accelerator. You can't hear it over the radio but it's embarrassing when my passengers do. It almost sounds like a puff of air escaping or something, similar to a go-kart engine lol.
Anyways, I took it to the dealer Thursday and they drove it and said the noise was normal during the engines break-in period and if it persists after 15k to bring it back and they would see if there was something that needed tightening.
I recently started noticing that my engine sounds louder and rougher than usual. I have a 2014 GX with about 25K on it. I get about 800-900rpm on idle and about 1800-1900 when cruising 70-75 mph.
Engine sounding louder all of a sudden. No "check engine" sign pops up. I also took the car to the dealer and mechanic rode with me on surface streets and of course , everything looked normal to him.
I did a search and wasn't sure if this problem was talked about. I noticed some threads discussing "squeaks" but the noise I'm hearing can best be described as a clunking or ticking kind of sound.
I notice that when there's stress on the seat (e.g. going over speed bumps, making turns, especially when there's an incline/decline), I hear a clunking or ticking sound. I'm not 100% sure it's the seat (thought it might be the suspension) but the more I think about it, the more I'm thinking it's the seat.
As per this thread, it looks like it may be TSB NV001-06 MAY 06 Interior - Front Seat Squeaking Noise.
Just wondering what I'm describing sounds like the same problem addressed with this TSB. I found this link for instructions on how to fix it: [URL] ....
How to clarify step 5A and 5B for me? Which part are you supposed to cut off? The text says to cut off the seat locator pins to 2mm but the diagram is pointing at some metal piece that is attached to the seat locator pin. Or am I reading this wrong? I've never done anything like this before so I'm a bit apprehensive and want to get as much information as possible before I attempt to do something like take out my seat!
I am running into issues with my 3GS recently I am hearing loud ticking noise coming from the left side on the front of my car and from what most of people have told me is it might be my Axle or my wheel bearing so was wondering what the part number was for both of them and what is the best place to order these two parts from.
View 12 RepliesThis started just today. I have a strange ticking noise coming from right behind my gauge cluster. The frequency of the ticking is tied directly to my speed. It begins when I drive off and slows to a stop when I stop (almost like a "baseball card in a bicycle spoke" sound, but just not as loud). What this might be? Could it have something to do with the speedometer? Odometer?
View 1 RepliesI constantly hear 'tick, tick, tick' sound from the engine at start. Once the engine gets heat up, the sound disappears. I live in canada so it is still kinda cold in the morning. I didn't have this problem in the summer. the problem started in december when it gets really cold in canada. so i thought it might be an engine oil problem. I called the dealer to ask what kind of engine oil they use for my azera, ans they said they just use a regular engine oil with viscosity of 10w-20. However when I check the manual, viscosity of 5w-30 is recommended. I know engine oil with viscosity of 5w-30 is thinner than the one with 10-20w and therefore easy for the engine to get heat up and better protection at start in the winter. What viscosity engine oil do you use for you azera? Will using synthetic engine oil useful??
View 17 RepliesThis is after a few minutes of the car warming up.. I'm concerned do to the fact that I've only owned the car for two weeks .
[URL] ...
Is this normal? I've heard this is normal for all Toyotas/Lexus? I just picked up my 2013 a week ago and didn't notice it?
View 7 RepliesI posted in this thread originally: [URL] .....
But today I had my wife drive the car and take some slow left turns while I listened so I could get a better idea about what the sound was and where it was coming from. From inside the garage and in the car, it sounded like it was coming from the rear but I now know it's coming from the front passenger wheel and it is not a "grinding" sound at all, it's more of a tick-tick-tick/click-click-click sound.
Applying brakes doesn't change the frequency or quality of the sound, but speed does. The faster the wheel turns, the frequencly of the ticking increases. It doesn't appear to tick/click only once per revolution, it clicks a number of times throughout the rotation and at some points during the rotation it clicks more often than others. Like, tick.... tick... tickticktick...tick...
When going straight there is no noise, turning right, it sometimes might click once or something but it doesn't really happen turning the other way. I've looked at the dust shield around and even tried bending it back a little bit in case it was making contact when I thought it was more of a grind but nothing looks out of place and nothing has been done to the wheel recently other than putting new rims on a couple of months ago.
Wheel bearing? I thought a bad wheel bearing would make noise no matter what direction you're going and pretty much constantly. CV? I thought CV ticking usually only happens at full lock but it ticks even on not so severe turning. Fender liner doesn't appear to be touching the tire, and the car isn't dropped and is AWD so there's plenty of clearance.
So, is this a trip to the dealer? I'm only under powertrain... not sure if something is up if it would be covered. I think wheel bearings are, but not sure about other suspension parts that might cause this.
2006 Sonata 2.4. A couple weeks back I posted about how my engine is making a slight ticking noise. It makes the noise consistently. I recorded a video of the noise. What it could be. Here's the video: [URL] ....
View 14 RepliesMy engine has been making a ticking sound when it starts and when i hit the gas the ticking sounds stays there but go faster depending on my rpms and before it would go away after the engine got warm but now its here to stay. What it could it i feel like sound is hitting against the acceleration cable.
View 14 RepliesI have a 2006 hyundai sonata 3.3L V6. Only happens on a cold start. I'll start the car and it won't tick while at idle. But as I drive away ill hear it for maybe about 2 mins only maybe in first gear until the car slightly warms up and then it's gone completely.
View 30 Repliesas the title says, my 2010 accent is at 81,000KM and i hear a ticking sound? is it the timing belt? when driving i dont hear any ticking but once stopped or idling i hear ticking and it never stops til i accelerate.
If it is timing belt, does this mean time for replacement? or what could it be?