Lexus GS 2006-11 :: Check 4WD Message When Turn Ignition ON Engine OFF?
Jul 22, 2014
I've noticed that the car has started to give me all the dummy messages, particlarly "CHECK 4WD" when I turn the ignition on without the engine running. If I then hold the brake pedal and start the engine, the message remains. If I turn the ignition off, and then start normally with the brake pedal depressed and start the engine it goes all normally and "CHECK OK" and I never get any errors when driving. I also noticed when this happens the AFS light is flashing as well - well, basically every warning on the dash is lit.
So, what's up with that ... I know it's normal for all the dash lights to light when the ignition is on and engine is off but I never noticed CHECK 4WD in this state previously. I haven't really noticed if it happens every time but it seems to happen quite a bit when I just turn the ignition back on to do something like close the moonroof if I forgot it. It's also odd that it doesn't clear when starting the car without first turning ignition off after that.
I assume that nothing is actually broken because it all behaves normally when starting the car regularly and the car does not complain at all when driving around.
View 1 Replies
Advertisement
I just got a new-to-me 2007 4.0L Explorer . When I turn the ignition to the on position, I get a message that says "Check charging system"...
Once I start the engine it goes away. Is this normal?
My battery reads 12.6 with the engine off and 13.8 with it on.
View 2 Replies
I have a 2006 GS300. Changed out the battery today, and immediately after the AC quit working. Pushing the climate control button reveals the message "Check the connection of the air conditioner".
View 3 Replies
I have a BMW 740I that has over 200,000 miles on the clock, I have noticed in the past couple of day that the check engine light when I turn on the ignition that it flashes then becomes still, what the problem could be, and if it is safe to drive?
View 9 Replies
I bought a 2005 Camry 4cyl yesterday and realized today that the check engine light was not coming on when turning the ignition on. I put my dtc tool on the car and got these codes. Getting P0300 ,P0303, p0304 & p0012 . Not sure where to start looking.
View 4 Replies
I have an Elantra (gas) with 23'000 miles and occasionally when I turn the ignition off it will diesel . I use 87 octane in the car . Changed the spark plugs 3 weeks ago , although it did it prior to that .
View 1 Replies
A few days ago my "Check VSC" warning came on along with the check engine and traction lights being on. I left my car in a parking garage for a week when I was on vacation and the lights came on once I started the car after getting back from my trip.
I have had the "Check VSC" warning before and I fixed it by replacing my gas cap. My gas cap seems fine this time around so I got my codes scanned and the only one that came up was P0300. Having this issue with the 2007 Lexus GS 350? I still feel like it's my gas cap because I bought a cheap replacement last time around.
View 8 Replies
Today the CEL on my 2010 HB with 30,000km came on and the car ran rough like it had a bad spark plug. I went straight home and luckily had a set on hand and replaced them. Car now runs like before but the CEL is still on.
View 8 Replies
I was driving home and all of a sudden my rpms are at 3.5 4k rpm wont shift to next gear. I put in in tiptronic mode and shift it to 8 it works fine. Then about 10 minutes later check vsc shows on dash traction control light is on check engine light is on and the light next to the check engine i think it is the abs light. I havent pulled the code yet.
View 1 Replies
So after installing my JoeZ axle back for about 5k miles I noticed there was an issue. The check engine light was going on but turning off randomly. I finally decided to take the car to the dealer for them to check out. So what the dealer said is that the JoeZ exhaust "direct bolt-on bolts" restricted flexibility and caused leaks in the front cats. He said that the stock exhaust screws had the springs on it to allow flexibility when hitting dips/potholes. With that said, He recommended switching the front two gaskets and using the stock "spring screws."
I was wondering, encountered this problem with the bolts that came with the JoeZ axle back? I bought the JoeZ off a user here and it came with bolts, which i assumed came with the exhaust when it was purchased new. Not even sure if the bolts he gave me was correct, or if i just made the mistake of not using stock bolts.
View 9 Replies
I have a 2003 GX with DVD & NAV. The DVD gives me a message on the rear screen that says "Disk Check" and then never plays the disk. I tried multiple disks and am pretty sure the DVD unit is toast. Looking forward to replace the DVD unit in the center console?
View 2 Replies
Today I received a “CHECK AWD SYSTEM” warning message. Car seems to be driving okay.
View 7 Replies
My 3is blind spot monitor and cross traffic alert doesn't seem to work anymore. I've tried playing around with the BSM button under the steering wheel.... i get nothing except a message on the dash saying "check BSM system" . Whats going on and how to fix it?
View 5 Replies
This and the check engine light came on when I started the car this morning. Its an 06 GS300 with just under 53K miles....
View 5 Replies
My 2002 F150 Screw has been giving me issues when trying to start it for the last month. Sometimes it will start sometimes it won't. When I turn the ignition on the gauges all seem normal, the theft light turns solid then goes out, but engine will turn over but not start. Sometimes it will start if I leave the ignition on for 20 seconds then pull the key and try again. (this doesn't always work). I have disconnected the battery for about 2 minutes this usually works but not always.
Sometimes it will start first time with no issues. Once the the engine fires it runs fine. Another symptom is when I shut the engine off, pull the key and open the door, the chime telling me that the key is still in the ignition sounds. (but the key is in my hand)
I put a new battery in yesterday to rule that out and because the old one seemed to be getting weak. (starting issues didn't go away). I don't want to put 300+ into a fuel pump without being sure that's the problem.
View 1 Replies
We have a 2004 2.4L 4 cyl Santa Fe. Turn ignition key get a click and engine will not turn over. Push key in harder and engine may start fine. If it is the key ignition switch or something else. is there somewhere I can look to see how to remove the ignition switch?
View 4 Replies
What is the problem and fix when you have a check air conditioner msg scroll across the GPS screen?
View 1 Replies
I have a 2003 GX470 with 174,000 miles. It continues to be a great vehicle.
Recently my air conditioning system only blows warm air in both the front and rear. When I start the vehicle, the Navigation screen flashes the message "Check Air Conditioner", then the A/C button on the Climate screen flashes.
I have searched the forums and read every post regarding this issue, and it seems that one possible fix is the "magnetic clutch relay", but the link to Sewel Lexus lists this part as belonging to the ES330, and NOT the GX470. There is NO such part listed for the GX470 on that website.
One other post suggested that the author pull the AC error codes, but I don't know how to do that on the GX470.
View 9 Replies
After installing new battery, I have no functioning air conditioning or heating system. When I select the climate button I get a message (check connection to air condition). What is going on?
View 2 Replies
1. I think my battery is getting weak.... when i cranked it, it didnt sound strong and the original battery eye says to add distilled water. I am thinking about getting a replacement battery at Costco.
2. so right after it started, the message of "Check Brake System" shows up. Tried to restart but no go. Drove about 15 miles and all seems fine but message is still there.
* is it OK to replace with a Costco brand battery (they have a great returns policy) and is there anything i need to do before or after replacement?
* could the Check Brake System be due to the weak battery? How can I reset it?
* Anything else that can cause this error message?
View 3 Replies
Check engine code (P0302). I have a 2007 GS 350 with 116k miles that was driving perfect until this week. My check engine light was initially blinking but is now on solid along with the check VSC light. My question is: of the 6 cylinders (3 on the left and 3 on the right when facing the engine) which one is cylinder 2?
View 7 Replies
