Lexus GS 2006-11 :: 2008 - Nav Screen Stuck On Insert
Sep 25, 2015
I Just bought my 08 GS 350 and the navigation worked fine except my road didn't show up. Not knowing much about navigation screens I assumed I could figure out how to update it by just going though some screens.....!!! I went through all the gps screens and got to a screen that said update gps or something like that..... but anyway I pushed it like a idiot and now its stuck on insert map dvd!!! I am like what?? Nothing came out though. Now I cant get the navigation to start back! Whats going on..where would a dvd come out at? How did I have navigation if no disc was in??
View 14 Replies
Advertisement
Alternator on my 2006 GX failed, caused battery to discharge and vehicle stopped. Alternator was replaced, battery (was new) is testing fine. All electronics and indicator lights normal except Nav system. Display reads insert proper disc. I have ejected and reloaded disc multiple times, no change. Disc is OEM, one release back.
View 14 Replies
2008 GS460 ... When accelerating from a stop sign/stop light it get's stuck in 1st gear for about 10 - 15 seconds before it shift to second gear. I notice this as the engine rev's high and is not shifting. Shifter is in Automatic and not manual mode. Happened at least 4 times in the past 2 weeks. Dealership is unable to replicate the issue and transmission checks out fine. Guess I have to wait until transmission get's stuck in gear before I can bring it back in.
View 14 Replies
Twice this happened today. When I inserted the ignition key, strange noise occurred under the dash. It sounds like some actuators or motors are being activated. When I turned on ignition, there was nothing, like the battery was dead. I had to wait until all these noises stopped, about 1 minutes, before I could start the car. After the car is started, I noticed that the avg mpg and the time on the trip computer had been reset. This almost sounds like the onboard computer was being rebooted. The terminals on the battery were checked to be very tight.
View 4 Replies
Too bright for me at night. A friend even told me " Stevie Wonder will see the map clearly". Is there a way to dim the brightness of the Nav screen?
View 4 Replies
How to disarm the auto steering wheel function on a 2004 rx330. I would like to stop the wheel from retracting every time I insert and remove the key. The manual says to contact the dealer.
View 9 Replies
I was playing around with the navigation system of my 06 RX400H because I read about the motion override online; however I was being stupid and chose the wrong option under the "load" menu, so the navigation system kept telling me "insert correct disk. ". Hoping that I could find a simple "reset" option there, I was playing with the diagnostic mode quite a bit. One setting allow you to select the navigation unit start up logo between Toyota, Lexus, and None. There is another interesting option called "car setting" don't know what it does.
Seemed like it let you toggle between a numerous of settings, I remember one being 9001X4WD or something. I didn't know what the setting does and accidentally changed the vehicle setting for my navigation unit. After confirming the edit, I realized that the mapping for all the buttons on my panel completed changed! First of all the map button (which wasn't working at the time because I had the wrong load option) became the "Audio" button that is similar to the audio button on my other car, 06 IS350, it showed me all my audio presets and I could choose using the touch the screen (normally this feature is disabled for RX400H).
I realized I might have screwed up the setting and wanted to change back to the original vehicle setting. I couldn't find much information online, so I figure I probably hit that set button by mistake 2 or 3 times, so I reverted the car code back to what it was 3 selections ago, and bam! My panel buttons are messed up even further! Now I don't even have access to the "info" button any more! I can still get access to the first level diagnostic mode using the "display setting" (display key is mapped to the info button now) then left upper corner + left lower corner method, however I can't change the vehicle code in this mode.
I took the car to a local dealer, and the service tech was like "what the heck did you do" and he said he don't know how to fix this except to replace the whole navigation ECU which would cost thousands of bucks. I asked him it would be as simple as getting access to the onboard ECU memory and rewrite it and he said the data format is Toyota proprietary and the dealer doesn't know how to fix it.
Of course I wasn't satisfied with the answer I got, I took the car home. Following some good information on forums and navigation ECU replace instructions on AllData, I was able to remove the navigation ECU from the car, then took it apart, disconnected the power daughter board, pushed the black reset button(?), and then put everything back together. I have seem people saying this method working and not working, but for me it did work. When I restarted the vehicle, the "loading data do not turn off" screen came on, and after the system booted, GPS navigation is working as usual now. On e interesting observation, before the GPS unit has established a connection with the satellites (took about 2-3 minutes to do so), the default location for the vehicle in the system is somewhere in Washington D.C.
Now I have undone my "load version" mistake. However, without the "info" button being mapped to the dashboard, I don't even have access to the menu where you can change the "car code", so even if I know the correct code now, I wouldn't be able to enter it. also it seems that I was able to reset the ECU when I took it apart, I am suspecting that the setting for "car code" isn't store in the ECU but it is stored somewhere instead.
View 14 Replies
So my screen has been acting up for a while now...not too sure why. I have an '08 350 without navigation. From time to time, the screen will automatically go off regardless of what's being viewed. I took a look and fooled around with some settings (the auto transition from climate to trip or whatever you call it) even tried pushing the screen off button in hopes it would reset or clear the problem. It's just annoying because I have to constantly re-awake the screen only to have it happen again moments later...
View 10 Replies
I just bought a 2010 LX and tonight I discovered that I may be able to play a digit copy DVD. So, the kids jumped in the car and inserted one of their movies(not Blu Ray) and we can only hear it. All we see in the video box is a blue screen.
View 5 Replies
I have a 2016 LX570 with 5,000 miles on the odometer. This morning the navigation screen is blank and the radio does not work. Took the truck to the dealer, they said Lexus is aware of the problem but does not have a solution. They will call me back when Lexus figures out what is wrong. No offer to give me a loner with a functional navigation unit.
View 3 Replies
On my 2007 GS350 I have an annoying (or) normal problem where the Nav screen has to warm up a little, like an old tube radio, to full brightness when I start up the car on a colder morning. It takes about 15 to 20 seconds. My Lexus dealer first said it was normal but eventually gave up and replaced it. It still seems to be about the same.
View 8 Replies
Listening to a CD, everything working fine, i change to FM radio, shortly later press the "disc" button, but my screen reads, " no disc" even though there are 6 cds inside. If i press the eject or load button nothing happens.
View 3 Replies
How to disable the "I AGREE" button that appears every time the car is started? I have seen other posts that refer to this issue on other non GX models, and take about putting the system in "simple mode" by pressing the SCAN button eight times, then the REPEAT or another button after that. I have tried this on my 2006 GX but with no luck. After I put the audio system into CD playing mode, I press the SCAN button repeatedly and quickly but all it does is scan the audio tracks.
The only other thing I know about my GX is that it is still on its original nav software, and is scheduled to receive the update which my Lexus dealer says is coming out in October. Not sure if this affects its ability to bypass the "I AGREE" screen, or if the software update will affect it either.
View 6 Replies
OK..so I had the dreaded "Digitizer stopped responding" issue with my Nav screen. I took it apart to repair and now, screen is all white...also the digitizer cracked.
I used to be an electronic tech for many years and fixed many PCBs in the past, but somehow a small transformer on the PCB that drives the LCD panel broke. It is un-repairable as it is surface mounted and I wouldn't even know where to get the part. Also, I was chipping away the glass to get at the traces under the edge of the digitizer and the glass cracked.
Anyway; here is my question. Does the driver PCB, LCD panel and Digitizer are the same on the Nav and Non Nav units? All I need to repair the screen are those three parts. I have seen the non-Nav units much cheaper than the Nav units. Even if I can get a used one, at least I can get the screen to work again in my wife's car.
View 14 Replies
For the past few days, every time i turn the car ON (with the headlights ON), the nav screen, clock and surrounding buttons illuminate as they should, but after ~3 seconds, the illumination for the surrounding buttons and clock shut off.
Also, the touch-screen functioning and surrounding buttons do not work at any time. The nav screen remains illuminated, however the touch-screen buttons and surrounding buttons do not work. If i turn the car off and restart, same thing; all lights illuminate for about 3 seconds then stop.
During the day with no lights on, the clock will illuminate for ~3 seconds, then shut off just like above. None of the surrounding buttons (climate, map, infom audio, display, etc) work at all.
What would cause this unusual condition? I feel like if a fuse were blown, it wouldn't work, period. But, the lights illuminate for a few seconds before shutting off.
The emergency flasher button works and illuminates always, and the passenger airbag lights do, likewise. I pulled the nav unit from the car and checked all cables, and they all appear in place.
I can communicate with the car via the voice commands, but that's it.
what might be causing these strange symptoms?
View 8 Replies
Its about 100 times worse and more annoying in person...this is after felting areas around the navi screen and around the windshield area. Are yours this bad? [URL] .....
View 8 Replies
Is it easy to replace the retractable rear window shade? My wife stuck something in the back and when it moved up, it tore the screen.
View 14 Replies
My GS350 is a spare car that sits for weeks at a time and recently the battery fully discharged. After charging the battery and getting it running, when I go to the climate control on the touchscreen, I don't get any climate controls. I get the error "Please check air conditioner connection". Any quick way for me to reset or rectify this or do I need to go to the dealer? This error is a result of a dead battery?
View 1 Replies
My info screen will display all info but the clock will reset over and over and the. Buttons will not respond?
Here is a video of what it's doing : [URL] ....
View 2 Replies
I have an issue with my 06 GS430.
This all started this morning when I first started the car. The clock does not display, all of the buttons to the left, right, and bottom DO NOT work (this is NOT good because I cannot control the climate, turn on a/c, heater, NOTHING) navigation touchscreen works (but again navigation push buttons to the right of the screen do not work).
So, the only thing that works is the Radio and the Navigation touch screen! Also, all of the push buttons surrounding the navi screen do not illuminate at night when lights are on.
Things I have done:
-Checked fuses (IG)10A ECU-IG RH, (ACC) 7.5A ACC, (BAT) 7.5A TV, RAD 1,2,3
-Hard Reset - Disconnected Neg. Battery Cable for 20 min.
Is there anything else that I can check for or is my entire Navi Console Unit shot?
View 7 Replies
My car does it every so often, gears 4,5, and 6 sometimes don't work because the car won't shift past 3rd, or sometimes 4th...
The car does have 161k miles on it.
View 14 Replies
