I have a 2008 Gs 350, and I want to change the front of my lights. I was thinking maybe like for the fog lights HID yellow and make the day lights match the head lights. Or make everything match?
View 14 RepliesLately I changed my front brake rotor and the new brake pad. However, When I doing back forward with applying light brake. I can hear "gara gara" noise from the front brake. Sounds like two steel material hiting each other.
Also, there is a different noise comes out when I releasing the brake after local stop. (red light stop or stop sign). I ask the mechanic when I doing the oil change. He checked and said my brake just are fine.
Probably it needs time for the pad break down with the new rotor. I used the Posi ceramic brake pads with the come with shim.
I'm wondering when I should get the spark plugs change.
I have 08 GS350 with 57k.
My 07 GS350 for the second time, gave me a low oil warning light. the car has 114k and had the cam TSB work done. The first time I had low oil was about 2,300 miles ago when my alternator started burning. Got that replaced along with a oil change,brakes, coolant flush and belt change (i know i know I got raped by the dealer). Last night driving to the gas station with car almost on E the low oil warning came on again..I always have them put 5W-30 synthetic but during my last oil change they put in 5w-20. I don't think that this would do anything however. Not due for an oil change. I spent about $1200 on the car in January to fix the previously mentioned issues. I love my GS and do not want to get rid of her.What are my options? What could be wrong?
View 12 RepliesI just spent about $600 on front Lexus Oem struts, Front Strut mounts and labor to try to cure a knocking sound that developed recently. My 2007 GS350 has 84K miles on it. Figured it was time and I had a 50% off labor coupon from Pepboys so it wasn't bad.
Unfortunately that did not cure the problem so I figure it was the upper control arm, but the whole front end was solid. I decided to take one of the Moog sway bar end links off that I just put in and drive around. The noise was completely gone!! So it appears that I had a defective sway bar end link!!!
So before you guys start swapping out front end parts for a suspension noise which is what I've seen when I searched the forum, start with the cheapest one, the end links. Take out the side that makes the noise and drive around to see if the noise goes away. BTW it is safe to drive with one missing. I was able to drive normally with it off.
I own a 2008 GS350.
Noticed this am my right headlight is out. However, when I put on the brights it works.
It appears the piece that covers the bulb is missing.
I have a couple of cracks in my front windshield and I'm thinking of replacing it.
A few years back I had the dealership work on the famous creaks and I know they stuffed felt in between the windshield cowl area. Would that need to be redone?
I would request a factory windshield but I'm concerned if it might make the creaking worse or if it would affect the integrity of the car.
Ok, so I just purchased my first Lexus (2008 GS 350 - 46K miles) and I'm having issues syncing my contacts with the car. The phone syncs. What am I doing wrong, is there some function on the phone I don't know about?? I've also read there might be issues with the Galaxy S4, is this true, if so, how can I get it to work?? Short of buying a new phone!!
View 12 Replies08 GS350 is my wife's car and I rarely drive it..
Anyway, I've noticed when I do drive it there is a detectable whine that I can perceive when accelerating normally in 1st and 2nd gear. Originally I thought it was something engine related, so I took it to the dealer and made mention of the condition. They didn't detect anything abnormal on this particular visit - although I did get them to change out the water pump.
Anyway, the whine is still there. It is due for another oil change in the next 500 or so miles so I'll probably bring it up again for them to look at. Just wanting to know if the whine is normal under routine acceleration or not.
I just got a used GS350. At about 20-25mph, it can sometime hesitate/jerk when I am driving without much acceleration. If I press the accelerator hard, the car accelerates without much problem.
I tried searching through the forum but couldn't find same problem except maybe the LS460 [URL] ....
I have tried cleaning the MAF with CRC cleaner + resetting the ECU by unplugging the battery for 10minutes but I still have the problem. Strangely, I didn't have to recalibrate the windows after plugging out the battery, but the GPS did the long initial boot-up..
I have 08 GS350 that has been doing some big time hesitating at low speeds. Brought to dealer and the mentioned water got into the transmissions and want me to pay for a flush.(I think they should, since it's under warranty). Can damage done now cause issues in the future?
View 12 RepliesI drive a 2007 Lexus GS 350 with 60,000 miles on it. Today I was running an errand I parked my car and then went back to work. After four hours I came back to the parking lot and heard a really low beeping sound coming from the parking lot. It turned out to be my car. I tried to open the car door with my keyfob and nothing was working. I opened the door manually and was not able to turn the ignition on as there was no internal power. I finally jump started the car and alarm went off as the car started.
I got the battery tested and the battery was completely fine. I called the Lexus dealership and explained the problem and the technician did not think there was anything wrong with the starter or anything else with the engine. The gentleman I spoke to thought you might have been Keyfob battery that may have caused this. One thing that I noticed last couple of Was that the car air filter needs to be changed. Could that have caused this to happen?
Temperature has been in the 90s in the week or so! The car was parked in a covered parking ramp!
I bought my GS new and it has 40K miles now. It is a 2010 GS AWD. Yesterday I get off work, a hot day, I get in the car, started the car, and passenger front window rolled down by it self. I tried to rolled it back up and it would not go up. I shut the car off and re-started and was able to roll it up.
I thought maybe it was the heat. The next day it happened again, but this time while I was driving. There are no funny noises coming from in side the door and no water has ever gotten in there. I also never leave the windows cracked instead I raise the sun roof up for heat to escape. I find this very odd self-operating window. The rest of the windows work just fine.
Battery has never been disconnected. what may be causing this window to operate on its own? a lose wire maybe?
Well got back home for the weekend and after a 200 mile drive I shut the engine down and step outside and notice fumes comimg from the front of the car. After popping the hood and looking and smelling around. Well I drive to my parents house (30 miles) and notice smoke, I'm angry now and call Lexus to drop it off.
After 2 hours they still haven't figured it out and give me a loaner anyways they did confirm a transmission leak. We'll see what happens Monday. By the way just bought new struts, plugs, K&N filter, Winter tires what a waste. Look for it on classifides. So to date Water pump, Alternator, Valve springs etc, transmission. Odometer is at 103000 now. 2007 GS 350 RWD.
My 08 gs350 makes a clicking noise when you open the doors really wide and again as you close it. I've tightened all the screws around the door check... Also lubed it as good as possible.
Could it be something to do with the door check pin? How do you replace it?
I changed my front rotor and brake pad with the oem parts last week. However, it has noise come out everytime when I touch the brake. Is it normal? Or does it need times for break down? Or I did something wrong in installing that cost the noise?
View 13 RepliesAbout 6 months ago I bought a '08 GS 350 CPO. Love the car but after a month or two of ownership, on light acceleration 3rd and 4th gears will shudder. The whole car will buck and shake, but if I give it more gas it will smooth out. Doesn't seem to be the engine, I suspect more the transmission. Of course I took it in and they "could not reproduce the problem"... Is this just a normal characteristic of the car?
View 14 RepliesAbout 15x now over the last year, I get in the car, press the brake, the green light comes on and half way through the start-up, the car locks up. Dead, nothing. The brake feels stiff, the key fob will not open the trunk, nor will it lock or unlock the doors, no more green or orange light on the start button. Completely dead.
The last time I opened the door, closed it again and everything reset. It came back "alive", the navigation system rebooted, the air was off and my clock had been reset.
Some days this happens in a matter of a minute or two and other days it takes ten min. Why? Is it a faulty ground? Not sure why it would automatically reset on its own.
I recently notice the front right tire on my GS makes a bearing sound like at 40mph and increases at 55mph. Anything after 60mph is not too bad. I looked at the tire and notice the inner top of the tire is wavy. My brother says the strut is bad. I think not because, the car dose not bounce and strut is dry of fluids. The car has 38K miles on it, alignment was done by dealer at 35K ...
I did rotate the tires front to rear sound went away for a day and started back up again.so I know its not the bearing. Do I need better tires? another alignment? or strut?
I read a few posts about changing the front parking light bulb (I think the same a city light in some countries?) in a 2008 VW Passat B6 and it seemed a quite difficult affair. However, after performing it myself I realized it's very simple and shouldn't take more than 5 mins:
First locate the cover for the front headlights:
Then open the brackets on the bottom and top of the cover. For me it worked better to open the bottom bracket first. Just flip it down with your finger:
Then inside the housing, locate the plastic flap for the parking light bulb:
Just pull it straight back. There is no hinge or anything, so just a quick pull back should do the trick:
Change the bulb and re-assemble everything back.
I was trying to find a guide on how to change out my reverse lights to LED, I'm having problems removing the panel. The guide i found on here had all the pictures removed. I'm also trying to change the lights for the make up mirror.
View 14 Replies