How I can go about programming my smart key remotes to the memory positions of the vehicle? I had it all set up from the dealer and since then they had to disconnect the battery for something and now I don't have that feature. It was setup where I can walk up to the car and unlock it by the remote or door handle and it would put the memory position to that remote?
View 4 RepliesI picked up our ("our" means my wifes) GX last Friday. I'm a sports car and sports sedan guy. But I love buying vehicles, and I a huge car nut. It's a heck of a nice Luxury SUV with a lot of nice features.
One question so far. The web site specifically says the passenger seat position can be saved to the memory, but for the life of me I don't see how. Can it?
I have a 2006 sc430 and have been having problems with the drivers memory seat although the passenger one works fine.
I have disconnected my batter for 5 minutes, moved the passenger seat all the way forward, heard the beep. Moved the reclining part all the way forward until I heard the beep, and the memory seat for the passenger works great.
I moved the drivers seat all the way forward, heard the beep. Moved the reclining part all the way forward until I heard the beep, but the memory seat won't beep (when you hold set and a number). I even replaced my drivers mirror (didn't tilt down due to bad motor), but that didn't work. Of course, I did redo disconnecting the battery and reconnecting it resetting both drivers seat and passenger seat.
I just got my car back from a body shop, after they fixed all the rock chips on the front. Now I realize the seat position memory is not working for both the driving and passenger seats. Not only the button does not move the seats, but I can't set the new positions into the memory either.
View 2 RepliesNew owner of 2014-RX350. I have figured out most stuff simply using the owners manual (go figure), but this one continues to stump me, as I have repeated the procedure right out of the owners manual without success.
Manual states to have only one fob or card present, car in park, "ignition on" position (I interpret this as two pushes to the ignition switch), push desired memory button and hold while pushing either lock or unlock button till chime sounds. I get the chime. But when I lock the door, wait a minute, and unlock the door by touching the handle, the car unlocks just fine, but seat does nothing. When I manually push L2 (in my case), the seat does indeed move into position. But I cannot for the life of me get this function to work.
I've noticed over the last few days that my seat position memory is gone. I thought maybe it was because i was using a different key, but that is not the case. I tried resetting buttons 1, 2, and 3, and neither set my seat to the position i specified. Button 1 is the only one that works, but it puts the seat all the way forward. Is my comfort module shot??? brand new car.
View 2 RepliesSo this morning, I pressed memory seat #1, and it did not move my chair to the position that I set it for. I had to adjust the chair manually. Every time, I move the chair back or recline the back, in intermittently beeped every 1-2 seconds. It does not beep if I move the chair forward. Could it be the fuse? or what could be wrong?
View 9 RepliesWe bought our ES350 used a number of years ago. When we changed the battery, the Nav system no longer worked and a " A program cannot be read. Please consult to a dealer." message appeared. Am I wrong to assume that the loss of power from the battery swap caused the software to dump from the system and there was no disc installed to "reboot" the system? All I need is a disc and the system will restore? If so will an "update" disc work or do I need an original "program" disc?
View 1 RepliesDoes the memory seat function remembers the back position (angle)? Or does it just remember the height and forward/backward position of the seat? The back angle position is not remembered in my 2014 Avalon Limited but I am not sure whether I should report this as a problem or whether that is just the design.
View 2 RepliesI have my mirrors set to tilt when I am in reverse but now they are no longer going back to their initial position when I shift from R to D. They always end up too low and require further adjustment. Is there a way to reset/recalibrate the mirrors?
View 6 RepliesSo a few months ago I started hearing some clunking under the vehicle so I got under there and sure enough the control arm bushings were shot. Took it in to Lexus for service and had them look while at it to confirm that is indeed the issue. After replacing all 8 of the front end control arms and 2 of the ball joints the clunking is still there. Seems to only do it while turning. Regardless whether giving it gas or braking.
What it might be? Its fairly loud and definitely coming from the front suspension (I can feel it through the steering). The control arms are brand new. The ball joints are brand new. Just checked the tie rods and they're are in good shape. What else should I check for?
This is an annoying thing. for example when i just have to step out for 3 seconds and grab my mail I don't want to shut off the entire car and restart it.
1) Is there a way to leave the ignition running and get out of the vehicle and lock it?
2) I heard we can go to the dealer to enable the remote start feature, is this true? or would we need to do a 3rd party addon?
2008 lexus es350 i have
I have an 07 350 without the navi system. Is it possible to add the sensors that detect how close you are getting to a car in front (or behind) you?
View 10 RepliesOn my LS 600 HL- there are two buttons on the rear door handle. One is C and other is M.
One lights up, when pressed. What is the function of each?
I would prefer to leave the back seats in reclined position permanently but I find that they go back to erect position often (I didn't particularly test this function). What is the function of the C and M buttons?
I have noticed sometimes when I turn my car off it will chime until I exit the vehicle and close the door and then sometimes it doesn't do this it at all. What's the catch?
View 14 RepliesWhere the vehicle speed sensor is located on the 2007 es350. Reomoved battery and air filter box but just can't find it.
View 1 RepliesI finally traded in my car and picked up a black 2010 ES 350, CPO, with 33k miles. However, i feel a vibration inside the vehicle while the car is idling (even when it is fully warmed up) and i was wondering if this is normal on these models? I have owned a is250, and ls460 and I didn't really notice anything like it. It almost feels like my ex's toyota camry when idling (not as loud of course). Is there a recall that fixes it? or is this normal with FWD vehicles?
View 11 Replies2007 Lexus ES350 with 177k miles. Getting a P0368 (Camshaft Position Sensor B Circuit High Bank 1) Error. I can't seem to find online where this sensor is located at.
View 2 RepliesJust bought a 09 Santa Fe AWD 3.3l .. How to program this key fob/remote start 1 works the other does not do anything . The led light flashes when i push button but does not do anything to rig.
View 3 RepliesI just purchased a 2007 w/ Nav and evidently the last owner only had one key/key fob so I ordered another from the Toyota Dealership. I took the car today to have it programmed and to make a long story short, they were not able to program the key.
View 9 RepliesI recently purchased a '09 LS460 SWB. I noticed the driver side windshield wiper arm sitting up high enough to be in my field of vision.
I'm aware that there is a "winter mode" that allows you to raise the arm up a few inches, but from everything I've read....usually the driver and passenger side arm raise together.
In my case, my passenger side arm sits nice and low near the hood, while the dirver is sitting an inch or two higher.
I tried pushing the driver arm down (with success), but after cycling the windshield wipers once, the driver side arm goes back to the higher position.