Kia - Spectra :: 2009 - Power Steering Belt Slips When Turning Wheels And Starting Car
Jan 9, 2016
Have a 2009 Spectra and the power steering belt slips when turning the wheels and starting the car. Assumed it was the pump and replaced it with a salvage part ... same problem. Entirely possible we got another bad pump but seems unlikely it would exhibit the exact same symptoms. Is this a common problem with this model? Is there anything else in the system that could cause the pump to seize up when turning the wheel?
View 6 Replies
Advertisement
I have a 2009 Kia Spectra with around 119,000 miles on it. A while back ago I started noticing my car making a clop clop clop sound as the wheels turn that echoes back at me when I drive by a building etc... It almost sounds like a horse trotting. First, what is the nature of this problem ? And, secondly, is this something that will be expensive to repair ? And, thirdly, is this something that could be potentially dangerous the longer I let it go ?
View 8 Replies
I have a 2002 Honda Accord SE and I observe that the transmission slips, meaning the car revs but does not power the wheels. I have got this checked by a mechanic and he recommended a transmission replacement or live with it until it completely fails and then go for a transmission rebuild/replacement. The car has 115k miles on it and I did not do a transmission flush as per recommendation from the mechanic. He said that if I flush the transmission fluid, there is a high chance that the transmission will fail and will need an immediate replacement. I do not have any issues with the way the car drives now, but I am worried if something happens to the transmission while I am driving.
View 5 Replies
I have a chirping noise probably in the power steering pump. But maybe the alternator. Any fixes or just replace it. 2007 kia spectra.
View 13 Replies
I have a 01 Chrysler Sebring 4D Sedan. I have been working on cars many years, never done tie rods. This my first attempt, I messed something up I believe. I replaced both inner tie rods and outer ends. I followed what I thought was correct procedure., counted turns on ends coming off. Installed new ones the same amount of turns. Before I did this the steering was fine. Now when I turn sharp to the right or left, like turning in to a driveway, I get an awful binding grinding noise, and I can feel it shimmy in the wheel. It will even stop the car going hard right. I can see evidence of rubbing on the CV boot closest to the wheel on the pass side. I assume I messed up somewhere with setting the steering when I installed the Tie rod ends to the wheel hubs.
View 19 Replies
We recently purchased our 17 year old son a 97 celica, Problem, when he goes out in the morning to start it, it sounds like a is belt squealing really really bad. We changed the tensioner and it stopped for about a week and then returned. We sprayed the belt with belt dressing to determine which belt it was, one at a time, it was the one that goes to the alternator, so we put a new belt on it, the sound stopped this time for a few days and returned.
This happens whether it is wet or dry, but seems to be worse when dry. The sound lasts for a few minutes and usually goes away. I thought it sounded (the actual sound) like power steering. The sound does get worse when we turn the steering wheel, then when the steering wheel is straightened it goes away. My son said now it periodically will do it will drive for no apparent reason and go away.
View 3 Replies
My hyundai accent has been giving me fits for about 6 months but I didnt think it was a major issue, apparently I am wrong. When it first started the check engine light would come on randomly and go off after a few minutes or even a day. Then it started staying on longer and when it would go off my car would stall. Then when it got cold twice I went out to warm my car before I left and when I came back out to leave it was dead, had to be jump started and while driving the first couple of miles it would die, it always cranked fine but it at lights or stop signs would die. Now it has stopped all together, it turns but wont start. I have a spark and we have tried the cam sensor and crankshaft. The fuel pump wouldn't go out while I was driving would it? or what could it be we are kind of at a loss.
View 11 Replies
2001 V70 Volvo Wagon 114k miles... The following in order has been done so far in the last 3 months mostly because the mechanic who did everything besides the mounts takes forever.
Rotors & pads
Replaced axle shaft
Oil & new air filter
Replaced steering wheel pump #1 - with new liquids
Replaced steering wheel pump #1 with #2
Replaced steering wheel pump #2 with #3
Supposedly checked the rack & pinion
New hoses for the steering wheel pump
Alternator replaced
All front, right and rear engine mounts have been replaced
I am about to literally come out of my skin with the subtle vibration that comes through the steering wheel, seat and floor on the drivers side. When I put my hand on the shifter I don't feel the vibration nor when riding on the passengers side. I have to stay that the car sounds like an old Singer sewing machine too, not the smooth engine sound that I had before all the repair work. There is also a very slight lag when starting off and a grown that comes from under the dash to the right of the steering wheel when in reverse and turning. My regular volvo mechanic says that the car is worn but I should keep it anyway.
View 11 Replies
I noticed over the last week that there was a pretty loud whine associated with turning the steering wheel. I checked the fluid level and it didn't seem low. I added a touch just to make sure. Took it into the dealership today and they called back and told me there's a bunch of fluid on the bottom splash pan. They haven't said what the culprit is yet. 46k miles on the car.
View 6 Replies
I have a 09 Spectra. This morning when I went to start, it turned over fine but just wouldn't catch. I tried it and gave it a little gas and it fired up just fine and I drove to work with no issues. No CEL came on or anything.
This is the second time it's happened. First was over a year ago and after it sat for a week while we were on a cruise. This weekend it didn't go anywhere. I just moved it in the driveway a little bit so I could rotate the tires and and moved it back.
Any clue on what it could be? If what I understand is correct, pressing the gas pedal on a fuel injected car shouldn't matter, but apparently it did, so I'm not sure what's what.
View 6 Replies
This is not my truck, it's my aunt's and she told me today that when she makes a right turn her steering locks up and she has to jerk it to the left, she plans on taking it in to the dealer to be fixed. Truck has 10k miles, 4.6L 2v, 4x4
View 13 Replies
I drive a 2009 Kia Spectra. Mileage - 89,000. About a year ago, very infrequently, I started noticing that the engine would start racing when I would try to come to a stop. Now, almost every time I start the car, the engine is racing while it is still in park. And when I come to a stop sign or stoplight, the engine races when I put on the brakes. This is NOT an issue with the mat hitting the accelerator. Lately, also, the car is starting to die for no reason when I bring it to a stop. I took this in to a mechanic, they could not find a problem--they cleaned off some cables but the engine was racing when I turned it on to drive home.
View 5 Replies
2000 Ranger XLT 4x4 3.0L Auto
So a couple months ago I had a transmission problem. It shifts high and hard all times and after the "od" light gets going (after it gets warm), the transmission slips (like riding clutch) when starting from a stop. If I went from drive to 1st gear with the selector and back, it cleared the slipping problem for a bit. I did an oil/filter change and about 50 miles later the truck is running fine, no issues. One day I hopped in it to go to work and it was like nothing ever happened. Fast forward 1,500 miles later. I start to notice the transmission is subtly shifting weird, like a small jerk when shifting. It gets worse over 50 miles and now I am back to the above problem. Is there a way this could be a sensor or solenoid problem? I never heard of a transmission correcting an issue then starting at it again so much later.
I don't like fixing or working on an issue unless I am at least 95% sure what the problem is. I also don't have $2k to plop down on a repair at the moment. Would it be worth it to take this to a dealership and see what trouble codes I am getting? I would try a transmission shop but it's not guaranteed they will have the test equipment to check a ford transmission. Also a friend said that AutoZone and other stores can't check transmission codes. So what's the best option here?
View 14 Replies
So my 09' Camry now has 130K KMs on it and for the last few months I've had an issue where when I turn the steering wheel (at rest and while moving) there is a clunking sound and feel in the steering wheel at various spots in the steering wheel rotation.
I'm worried the u-joints (if it uses them) in the steering column are worn out and might need replacing/lubricating but I'm not sure how to address the issue without an expensive Out of warranty visit to the dealer.
View 14 Replies
I have a V6 Automatic 2001 Jeep Grand Cherokee with 94k miles on it. For the last two years my transmission has been slipping only when I make left turns. I have tried changing fluid and filters. The problem hasn't gotten worse but it is pretty dangerous as I cannot accelerate when I make a left turn. I was wondering if there is anything that could be causing this problem.
View 6 Replies
04 F-150 2WD 5.4L AUTO Extended cab
I had my tranny rebuilt under warranty at about 70K and I'm now at 167K. When it was rebuilt (by Ford) it still had a slip feel when I picked it up. Rode the mechanic around the yard and he felt it. Dead stop and take off while turning. Like from a stop sign. He took it back and found a sensor/module/something that was the culprit. Seems I remember they found it with a computer? Is there a computer/reader that will diagnose a tranny?
View 9 Replies
I just recently bought a 96 XLT 4WD Aerostar. It's got about 158,000 miles on it. It's got a few problems I wanted to ask about.
1. When I'm on the highway, once I reach about 82 or 83mph the transmission seems to slip into neutral. Does fine around the city and every other speed on the highway but once I pass 82mph it slips and revs really high. Could it be the torque converter?
2. Clicking while turning sharp and reversing while turning. I figure it probably needs new cv joints?
3. The gas mileage seems terrible. I still have my Ford Econoline 250 and that seems to be getting better gas mileage. What might cause the mpg to be as bad as 12mpg on the highway?
4. The speedometer goes nuts after about 40mph. Is that an easy fix?
View 14 Replies
I have a 350 chevy small block in my 79 camaro and the power steering belt is constantly slackening. I have not driven the car more than a few hundred yards because its not yet street legal so it is not becoming loose due to it just stretching like normal over the first 100 miles. I have a brand new power steering belt and have replaced the power steering pump as well. i have tightened the belt twice now after i have just run the car for a couple minutes without it going anywhere and each time it slips back to where it is loose again. I have tightened all the bolts and it keeps doing it so I'm not sure what to do now.
View 1 Replies
while out of town the big belt that runs the alternater and ac broke and took out the power steering belt. I replaced the big belt but do not know how to do the power steering one. I can hardly see the back sprocket.
View 6 Replies
Due to being low, and taking my splash guards off to put on my skid plate, in heavy rain, my belt I guess gets wet, slips and I lose power steering. I can hear it screech.
I didn't think that would be the case for snow, but sure enough after plowing through my driveway to go to work it was slipping screeching and loss of power.
View 7 Replies
I just replaced a serpentine belt on a 2004 chevy Impala. Now the power steering will loose some of its "power". I at first loosened the bolt on the tensioner not knowing how to properly make it release, then tightened the bolt back after realizing my error. I know it did not move though.
View 5 Replies
