I was wondering if there is any way to easily adjust the parking brake so it bites tighter. I took it to Lexus of Pohanka and they told me that it's normal in a Lexus car to have to press the parking brake all the way to the carpet to get it to engage. I immediately debunked this when I recieved a loaner and engaged the parking brake and it grabs a lot sooner.
View 6 RepliesI have a 2010 toyota camry that needs a parking brake adjustment. the car still stops with the transmission even if the parking brake pedal is pressed down. I changes the pads in the back and it seems to be a little better, but it's not as good as other Camry's I've been in. Where to look as far as the adjustments go? and possibly how if it's not the usual method.
View 4 RepliesI see many cars have the parking lines move when you have your steering wheel turn, i thought it might be a feature we have to turn. I cannot find anything in the manual or through search...
View 14 Replieshow to do this... The brakes can be down to the ground doesn't always hold on a hill. Plus it pushes down too easy in my pinyon
Sent from my SPH-D700 using [URL] Free App
Had my car parked outside of work for about 12 hours yesterday, and in the NYC cold front, the parking break must have stuck on slightly. When I started to move, despite the fact I'd released the parking break, I received a warning in the MFI that said PARKING BREAK FAILURE TO RELEASE. I pulled the handle again and heard it pop just a little more off. Everything worked great after that. If I hadn't received the alert I probably would have driven off with it on. I'd probably have noticed the hesitation and checked the break again, but the alert was useful. Some of the warnings in the MFI can appear to be a pain at times, but it's amazing how thorough a job VW has done monitoring the cars systems and giving real time information if something doesn't work. You just have to make sure you don't get info overload from it all!!
View 4 RepliesSo here it is, who out there with a 2012 SCREW can tell me how their rear parking brake cable is routed around the axle? The reason I ask is mine is routed under the axle and that just seems like a really screwy design. I would think any time the rear suspension was unloaded it could have the potential to engage the parking brake by the axle pushing down on the cable. My father has a 2014 and his isn't routed that way. I've also looked at a lot of pictures on the internet and haven't found any photos that show the cable routed under either. Is something off on mine, or is mine routed correctly and I just have not found any pictures that show it routed the same as mine?
View 1 RepliesIt's like a tire grinding or shuffling at low parking lot speed, hard right or left turn, more evident when slowly braking during the turn. Dealership claims the negative camber contributes to this phenomenon and that nothing can be done about it.
I realize we have about a 1.5-degree negative camber in 2011-and on IS-F (I have no mods and still running with stock Potenza RE-050s), perhaps this contributes to the feel of the tires at parking speeds.
My 2008 Prius has been sitting for about 25 days while I've been out of town. I just tried to drive it, but it feels like the parking brake is engaged even though I've pushed it off (and the lights are showing it is off).
A bit more detail: Car has been parked on a relatively steep incline (maybe 35 degrees) for about 25 days (this is its normal parking spot). Parking brake was engaged during this time. Weather is mild to warm (it's Hawaii). When I try to back up it feels like there is something behind the one of the rear tires, and the car almost starts to lift up a bit. (But there's nothing there that I can see.) I might have been able to push the gas a bit more, but was afraid of damaging something. When I put the car in drive and take my foot off the brake it rolls slightly (and very slowly forward), but not nearly what it should (I'm afraid to push the gas at all because there is a wall very close to the front of my car).
Seems like maybe the brake is stuck or something of the sort...
I have an 08 Sonata that just failed inspection due to the parking brake not holding. With the lever full up the E brake doesn't stop the vehicle at idle.
The rear wheels have disc brakes. How do I adjust the cable to remove the slack. I believe there's a center drum so I suspect there's a star wheel that must be adjusted. If so, which way does the star wheel need to turn, up or down. Is it the same direction on both the left and and right side of the vehicle?
So here is my issue, my parking brake light stays on. Ive checked my parking brake pads, the cables and the switch. They are all servicable and operational yet the light stays on...
View 7 RepliesI recently purchased an 07 f150 lariat leveled 4x4. I noticed the other day that all at once, the abs light and parking brake light came onto the dash, 4x4 low doesn't work and just stays in high and the ac doesn't blow cold. I'm assuming this is somewhat connected considering this all happened at once but really just not sure.
View 1 RepliesMy windows does not all go down when I hold unlock on my fob and how can I change setting for the car not to unlock when putting in park and when opening the door manually all inside locks would open too. My 2011 didn't have a manual.
View 3 RepliesI got a 03 sport trac and need to adjust the parking brake on it, needs to be tightened up, does not hold on the slightest incline, cables are not broke they where just never taken care of, its a disc brake with drum in the middle
View 1 RepliesSo I've been finding myself lately having to press the ebrake pedal pretty deep when parking on a non leveled surface. Went to the dealer and they said this car has self adjusting parking brake........ Is this true? Do I have to suck it up? If no, how do I adjust either the pedal or the parking brake bands?
View 2 RepliesAfter doing a Total Brake job on My 08 LS 460 plus Rotors. I got a warning message that my Parking Brake was inaccessible and to see the Dealer . I went back and changed all the Parking Brake Hardware to solve the Problem and I am still getting the same Warming Message.
View 14 RepliesIntermittently, the parking brake/ABS light comes on with no pattern I can put my finger on. Some times its on when I start it and stays on the entire time I drive it. Some times its off when I start it and then comes on while I'm driving it. This morning I took it by Advance auto and had them check for codes while the light was on: C1342 - ABS control module. I can't find a lot of information about this code or what can be done to fix it other than taking it to a dealer. Any alternative solution, perhaps re-seating the connectors to the module - and where the heck is the module and what does it look like?
View 1 RepliesJust need to know how common this brake adjusting lever is? Awhile back I rebuilt my whole brake system and for some unknown reason the DS rear drum brake wants to keep over adjusting. Checked and double checked everything but can't see what would be causing it.
The fix has been to pull the wheel and drum and back off the adjuster but that's getting old. If I had more time and enthusiasm, I'd switch the shoes and hardware side to side to see if the problem follows the hardware. My solution for now is go with manual adjustment and to disable the DS adjuster by cutting off the end of the lever.
Before I hack up a lever I'd like to have a back up in case there is any problem. Not sure if the junkyard will have what I'm looking for and don't see the correct style lever on Rockauto or at my local parts places. My luck is to cut up a part that's hard to find.
How do I adjust the parking brake on my 08 F250? It's not holding when my truck is parked on a hill.
View 1 Replieshow to adjust the sensitivity of the 2013 - 2014 Remote-touch controller?
These models years have the "Generation 7" infotainment system, which might be different from the 2015 - 2016 "Generation 8" systems.
I've looked around, but cannot readily find this setting.
My friend was looking at my tires earlier today and noticed that my brake pads were wearing at an angle. He was also shocked to learn that these pads have only 6,000 miles on them. We looked at the old front brake pads my mechanic replaced and they are not showing any wear like the current pads.
Below is the old pad that came off the car after 30,000 miles:
This is the pad my mechanic installed on my car, after only 6,000 miles
He also noticed some odd wear on the rotor - evidenced by the vertical lines across it's radius. He thinks it may be related to the problem with the pad. He also recommended a different mechanic... Is this wear considered normal? We looked online and some people reported similar wear, but nothing we found was as extreme as this.
My drivers side seat is loose as in it rocks back and forward when I accelerate or brake. I have checked all 4 bolts they are all tight. I can't explain what i see (perhaps I can take a picture or video) but something under the seat looks irregular as in it's moving and shouldn't be. I have ECP but Lexus wants to charge $140 just to look and see if it's covered under warranty.
View 2 Replies