Hyundai - Elantra :: Clunking Noise When Wheel Is Turn All The Way To Either Side
Jul 20, 2012
I recently heard a sort of clunking noise when the wheel is turn all the way to either side, going slowly, and pressing the brake. I took the car in and the guys told me it was something call the front struts and mounts. Plus, that I needed to replace the inner tie rods (described as a joint). The cost was crazy high, at around $1300 (plus the alignment). The car is a Hyundai Elantra year 2007, with an 87,000 miles.
My question is, in the event that this is not covered by the warranty, how pressing is the issue? Obviously, any issue can become pressing if left uncheck or exacerbated my another issue. But, if the noise I hear is minor, is it going to do lasting damage to the car if not corrected in the next month?
View 7 Replies
Advertisement
I have a 2013 Elantra, new in January, 6600 miles on it, and I took it in to the dealership today because it was making funny noises this week from the left front wheel; the noise gets faster as I drive faster. The left front tire has a bubble in it, and they're telling me the wheel is bent and the bearing is cracked, so they'll need to replace the tire, wheel, hub, bearing and do something with the alignment AND it's not covered under warranty because it is "impact damage." Is this even possible on a new car like this? For the bearing to be cracked without a big accident? I don't remember hitting a pot hole or running over a curb. Shouldn't this be covered under normal use? I'm concerned that I'm being ripped off
View 16 Replies
I'm driving Hyundai Elantra 2005 (manual transmission). When the car slows down (no gas pedal, no brake), it makes metallic noise on the right side. It mostly happens when RPM is between 1,500-2,000. When I press the clutch pedal, the noise disappears immediately. I brought the car to a local mechanic once, but he could not figure it out.
View 2 Replies
I'm getting this weird sound when i turn on my car and turn the steering wheel left and right not even a full lock just left and right really quickly or slow there is this annoying clunking coming form both of the front wheels atleast thats what i think it is and it feels as something is loose but i checked most of the bolts.. Recently i changed my front wheel bearings inner cv and outer cv joints on both front wheels.. i changed my ball joints and tie rods everything was change within a 4-5months..
Also the other day as i was driving and i could only hear this 20mph and up this weird clunking and vibration in the floor.. no vibration in the steering wheel just the floor and clunking sound.. i know for a fact i need an alignment and possibly new tires.. but what would the clunking be coming form when driving or just parked in place while moving the steering wheel...
View 7 Replies
Having issues with Gen3 Prius steering column? I suddenly developed this clunking noise when I rock my steering wheel from left to right. It's steering correctly but I've never heard this noise before....
View 7 Replies
I drive a 2004 Hyundai Elantra with 72,000 miles on it. For the last few weeks, I've been hearing loud thud sounds on the passenger side when the car is cold or fairly cold. It almost sounds like someone is throwing tennis balls at the passenger side door while I'm driving. It happens when I'm stopped or when I'm driving - either way. Today, the Check Engine light went on; I don't know if it's related.
View 2 Replies
I'm having an issue I cant seam to track down. I am getting a bad clunking sound from the right side while taking a right turn. I was thinking it was an axle because it was flopping around when I took it out to inspect it. So I replaced that and also the ball joint because it was ripped. Took the car for a test drive and still getting this banging sound. I went back and checked the suspension bolts, tie rod, and cant seam to find my issue. I know bad wheel bearings make more of a howl but could they also make a bad clicking sound? or do you think the issue is worse than I was thinking and might be the diff?
View 1 Replies
Our 2002 Mountaineer with AWD started to have a clunk noise in the front driver side wheel area. It happens only when you take you foot off the gas between 30 and 65 MPH. If you slowly ease up off the gas no noise you have to totally remove your foot from the gas. It sounds like something needs grease or like a gear is a little loose. I have seen some post about noise but have not found one that happens in this situation.
View 3 Replies
My front driver side wheel is making a clunk noise when I hit a bump. I replaced the wheel bearing hub assembly and discovered both axle seals were bad.
View 10 Replies
My wife drives a 2010 Hyundai Elantra with a 5speed manual trans with about 40K mi on it . We purchased the service maintenance package that covers all scheduled major and regular maintenance. A year ago they replaced the head gasket because they discovered a small oil seep. Well a couple of weeks ago I noticed that the heat is fine on the drivers side and blows cool on the passenger side. This is a problem particularly when defrosting the windshield.
When she brought it in for the next scheduled service a couple of days ago I asked that she mention this problem to the service people. Their response was "we need to do a cooling system flush which would not be covered by the service contract" to the tune of a couple a hundred bucks. The coolant is the transparent green it should be due to it being changed one year ago so I have my doubts about it being the heater core.
View 4 Replies
About 6 weeks ago I noticed a noise coming from the front driver side wheel area. We had just gotten the tire rotated and once at freeway speed it was like a squealing noise, just like when you have worn brakes. Since then the squealing noise is gone and now it's a faint (hard to describe over text) "whomp whomp" noise as if I have off-road tires. I notice it more on freeways I supposed because it's a smoother straighter surface. On a particular right bending street by our house it's louder. What it might be? Car has 36k miles.
View 8 Replies
I had my vehicle in last week due to a sticking in my steering wheel. An alignment was completed, however the issues still persists. When driving at 60 mph+, and when having to correct the wheel, there is a slight stick in the wheel. On a side note, my CV joint already had to be replaced!
View 20 Replies
My reverse lights stopped working and i was told that it is my reverse light switch. so i order a replacement. I took out the old and put in the new one but now the lights won't turn off.
View 6 Replies
I have replaced the ball joints(a year and a half ago) and put in the the ecs tuning control arms with the solid bushing. Recently, I have had a clunking sound, from the left wheel, when turning right. Kind of sounds like the ball joints when they were bad. This noise only occurs when I turn right under about 30mph. It also feels like the wheel might be doing a quick "wiggle." Do you think it is the ball joint again? Could a bad wheel bearing be doing this? I have replaced the right wheel bearing, but have not done the left one yet.
View 2 Replies
My car seems to make a tick tick tick sound coming from the left front wheel well, but it only occurs when I make right turns. Not left or when driving straight. Could this be a bad cv joint or wheel bearing? Again, only happens when making right turns and I believe at any speed and the sound interval I believe is shorter (faster tick tick) at higher speeds. Also, the vehicle is a 2001 manual transmission and pressing the clutch I believe (cant confirm) stops or slows the sound.
View 4 Replies
My 2007 manual transmission Hyundai elantra makes a single "tch" sound in the front passenger side. It does it at high speeds in 5th gear over long distances. Also if the car sits for a while it will make the noise right after shifting to second gear if the rpms are a bit high. What it could be?
View 2 Replies
I have a 2005 Honda Civic that was making noise on the front passenger side wheel and what sounded like the front driver side strut clanging (bottoming out) when I hit a bump, sharp right turn heading down hill, or hit a pot hole (small or large). I brought it in to a mechanic to diagnose the issue. They told me I had a bad wheel bearing and also needed new struts. They quoted me a price on parts and labor that I thought was too high, so I checked a few other mechanics to make sure that I needed the work and try to get a better quote. All said the same work needed to be done, so I eventually had them repaired.
My car seems to ride better and I don't hear the noise from the front passenger side wheel anymore or the noise from the front driver side strut, however, there is now a clunking like sound coming from the front suspension (left and right sides). It sounds kind of like something might be loose. I can hear it over slight bumps, and when turning whether I'm going slow or even coming out of a parked spot.
Is there something else that may need repair after having all this other work done? Have I caused a "needed repair chain reaction" or something?
View 6 Replies
A few weeks ago, my left power window spit up a screw and now the window is stuck. The motor grinds away and the window won't budget. Would a regular auto mechanic be able to fix this or do I need to go to a body person?
View 1 Replies
2000 Corolla - "growling" noise on the passenger side of the engine / stops when I turn the steering wheel - no loss of PS fluid (I also flushed the system) - which bearing(s) might be bad...?
View 2 Replies
I'm getting some heavy clunking from my passenger side wheel area, when I move the wheel side to side. I am almost positive it is the ball joint.
View 19 Replies
I have a 2005 accent. For the last couple of days every time I hit a bump in the road I get a not so nice clunking sound from the back passenger side wheel well. And when I make a right hand turn I hear a scraping sound coming from the same area. Is this sounds like a problem with the shock or strut, or could it be something more serious. If the shock was busted why do I hear a scraping sound when I make a right hand turn?
View 1 Replies
