Grand Prix :: 1999 GTP Rear Strut Shock Knocking
Mar 6, 2010
I have a 99' GTP with 199,000 miles. I drive the very bumpy roads of Chicago. Recently when I go over any small bump, large bump, or when I am going fast and break I get a knocking sound mostly out of the right rear wheel, a quieter knocking out of the left rear wheel. It just sounds like a dry knocking when you go over any little bump or inperfection in the road. I am assuming that it is the struts. I don't know if i can just replace the shock part for $50 something or if my problem needs to be solved by replacing the whole strut assembly which includes preassembled strut, coil spring, strut mount and strut bearing?
View 11 Replies
Advertisement
My 2008 Santa Fe (3.3 2WD) produces a knocking sound from the front every time I go on a bump while the wheel is turned. I can pretty much reproduce it at will. Occasionally, I hear the same sort knock from the rear as well, but I cannot confirm that it is consistent.
I do suspect that something is wrong with the struts. The only issue is that the car has 67k KM (41k miles), and to me, that seems a little early for that sort of thing to happen. My driving is pretty standard on standard roads, although winters up here tend to produce potholes that I sometimes cannot avoid.
I've had my struts fail on my last car (2000 Mazda Protege), but that was 9+ years old and with almost 3 times as much mileage on it.
View 2 Replies
Took it in for an oil change at 90k miles dealer reported a leaking rear right strut and quoted over 1000k for replacement which i obviously declined. Now wanna know what are my options can I change just the one rear side which is leaking and do I have to put the oem or can I put anything aftermarket.
View 14 Replies
My driver side rear strut/shock has started leaking recently (I've attached a pic). Its counterpart on the rear passenger side is bone dry. My Prius is a 2010 with 78,000 miles, mostly city driving.
View 19 Replies
Installing engine after complete rebuild. The starter will turn it over and break in oil was added. How can I verify oil is flowing when I turn it over (with no fuel or spark) to avoid a dry start?
View 4 Replies
I have a oil leak that I can't seem to find the source of. The head gasket corner (driver side firewall corner) has oil on it. (3.8 SC). Or maybe the intake valley gaskets are leaking but it doesn't appear so (and the intake was done within the last 20k miles). The back side of the oil pan (toward rear of car) is wet and the oil seems to be dripping off the transmission pan somehow.
Another thing is the knock sensor between the block and transmission seems wet, not sure if the oil is coming from above that or not, would the knock sensor leak oil or coolant? (or nothing)...
View 6 Replies
Drove 28mi out to dinner and when leaving after, she wouldn't start. Took it to work in the morning, and it ran fine prior to that. It was 15degrees outside, added heat to the gastank thinking the fuel line was frozen. Tryed to fire on, but it would only idle briefly surging while doing so and die, like not enough gas. It did start after I held the key down during this surging process grinding the starter also, should have driven home, but I shut it off like a idiot, as a result, had to tow home. Noticed TCS OFF light was lite up while it was running, then I shut it off, TCS OFF LIGHT went away when I turned key back on to attempt a 2nd restart. After i did that, it wouldn't fire on again. Towed to my house, I do not hear the fuel pump trying to kick on when i turn on the key. Fuel system is dry. Cranked over next day and definitely no gas in the lines. Bled the fuel system, no fuel shot out. Have checked the fuse box and the one under the hood too. Replaced the fuel pump relay but still no go just (this blows)...
View 7 Replies
I have a 1999 Pontiac Grand Prix. The needle on the temp gauge will float up and down after about five mins. of drive time...after a short period of time, however, it will settle around 200 degrees or so. (The heater will not blow warm air while the needle is floating.) The only time the needle starts to rise is when the vehicle is stopped in traffic, but even then, it never gets into the "red." The car never overheats and I have yet to see any coolant on the driveway.
View 1 Replies
Just had my car at the dealer for the airbag recall and was told one strut and one shock are leaking. the car only has 66,000 miles on it and i don't drive it that much as i also have an electric Fiat. This sounds a bit unreasonable to me. will definitely take it to an independent shop for 2nd opinion. 2008 Subaru Outback....
View 8 Replies
Took my 2004 Honda CRV 2W Drive to my local dealer for the 90K maintenance. There they recommended for me to replace the front shocks strut assembly--not quite remembering the reason but they told me that it needs to get done. Before I get the work done, I am trying to find as much info on what next steps to take.
View 10 Replies
Any noted 2.0T, B6 experience/solutions for squeaking/creaking suspension noises seeming to originate from shock/strut tower areas? I purchased new in 2009, 37K mi ago. VW dealer service persons think they hear it sometimes. Been chasing this problem for a year or more, mostly notable in cold weather. Condition evident driving on uneven pavement, dips in the road etc. Passengers ask "what is that squeaking".
View 7 Replies
I just bought a new 2001 Grand Prix. I am not completely car savvy, but I know a few things for a lady.
The battery won't hold a charge.
and the computer diagnostic tester thing says the Headlamp Relay is malfunctioning.
View 2 Replies
I have a 95 Grand Prix 3.1L and I can't turn my key. You can put it in and take it out, but it won't turn whatsoever. It's stuck in my driveway and I've tried just about everything to get it to turn.
View 1 Replies
I'm pulling the engine to overhaul. I've borrowed a hoist and think I'm ready to lift the engine out, but I don't know how to strap the engine to the hoist. I first thought of using the brackets with the eyelets bolted to each head and bought chain and hooks. But I had to remove the rear bracket so I could remove the rear exhaust manifold so I could remove that darn rear engine-transaxle bolt. (That really bites because I want to have the exhaust manifolds on when dropping it back in.)
Are those brackets intended for lifting the engine? If so, I could reinstall the back bracket and give it a go.
Searched the internet for info but didn't find much. Did find a 3800 being lifted with two straps completely under the engine.
Also, the engine-transaxle joint hasn't cracked open yet. I'm guessing it's because they're stuck after 198k miles and will eventually separate. But I did not find one of the engine-transaxle bolts mentioned in the 98 FSM: front lower (#1). I don't see how I could have missed it ; maybe the 99 doesn't have it?
View 4 Replies
Thought my transmission was slipping. So I changed the tanny. been driving it for a few days and now it doing the same thing. Is it possible that it a different problem with the same symptoms?
View 4 Replies
When I turn the car off the key only goes to acc. If I wait a few minutes I can hear a clicking sound coming from the steering column I think. Then I can turn it off all the way.Whats causing this? and how do i fix it. My car is a pontiac Grand Prix 2002.
View 2 Replies
I have a 2000 Grand Prix with a 3.8L engine that will not start. When I turn the key to the run position, the headlights and the dash lights come on, but when I turn the key to the start position, the lights go dim and nothing happens. No sound from the starter. I checked the battery and the starter and they are good. I installed a new positive battery cable. Still works the same. Not sure what else to check.
View 13 Replies
When you are accelerating anywhere from half to full throttle it may cut out at any given time. The RPM will drop down, it may bounce up and down for a bit and recover, or it will drop all the way down and stall. If you let off the gas it may or may not recover. If it stalls so far from the tests I have done if you never shut the key off it will never restart again. If you shut the key off and wait from 5 to 10 minutes it will all of a sudden restart normally like nothing ever happened. If you try to restart it immediately even if you shut the key off and back on it will not start.
When it does not start when I am attempting to start: Fuel pressure according to my gauge is between 55 and 60 psi. Inline spark tester shows that it is getting a spark. Engine sounds normal while cranking so in other words compression sounds normal. I have an LED test light rigged up showing when an injector fires, and it does show electrical activity going to the injector when it opens (flashes). Only clue is that it SEEMS dimmer when it wont start, but I have no clue if thats how it normally is on start up. Its only a slight difference from the brightness of a normal idle brightness. I have a snap on scanner hooked up, nothing that I know of looks abnormal in the data and it will not throw codes when this happens.
Parts I have changed or cleaned so far: Changed the fuel filter, crank sensor, cam sensor, ignition module, and MAF sensor. Cleaned the throttle body. When the car is working normally it runs strong, good power, smooth. Starts great normally.
View 8 Replies
What may be causing my car to harshly shift fron 1st to 2nd and then from 2nd the 3rd. One solution some one had was to replace the:
"TPS (throttle position sensor). The other reason for hard shift is a worn Boost valve and will need to be replaced, or a faulty transmission fluid EPC (electronic pressures control valve). Both Boost valve and EPC are located in the Valve Body and can be replaced with out dropping the valve body, but have to drop the transmission pan".
I did just recently top off the tranny fluid because it was running a bit low but there is no leak....
View 7 Replies
Last year my a/c worked off and on. so far now its not working at all. Compressor isn't kicking on. i bought a bottle of the EZchill refrigerant to recharge the system. I took the relay out and added 12+ to the pin to kick on the compressor. Even with the compressor running the gauges are in the blue range which is the normal operating range. With the compressor running, the air is cold but when i stick the relay back in the compressor wont kick back on. I tested the relay and its fine. Also the compressor is rattling.
View 8 Replies
Last weekend, I saw fluid under the right side of the car when in a parking lot and found a rather large puddle of almost clear, oily fluid on the garage floor when I got home. I figured it was power steering fluid. I just finished a rebuild a couple months ago but the old power steering pump wasn't changed, so I was guessing a leaky hose or seal.
I quit driving the vehicle. A much smaller puddle, barely more than a spot, appeared. But it was much nearer the front of the vehicle than the PS pump. And the PS pump fluid level is still full.
Not much evidence of dripping fluid in the engine compartment. Is it possible that the new motor mount installed just a few months ago cracked and leaked its fluid already? Don't know how I could verify that without removing the mount. I'm at a loss for the source of the fluid.
View 2 Replies
