Grand AM :: 2000 - Shaking Steering Wheel Starts At About 55
Jul 29, 2013
I have had a wobbly wheel since I can remember, it starts at about 55. I have replaced the front tires, struts and mounts, new rotors, brakes and I cant seem to figure it out. The front end is tight and the cv axle boot is still intact and I have never seen one go out without ripping the boot. If I lift the car up the front left tire hops a bit so thats the culprit but I cant seem to narrow it down anymore. I think its the cv axle but it seems weird considering the boot isn't torn.
View 4 Replies
Advertisement
When I turn my AC to max. power (fan) the steering wheel and the entire dash board starts shaking and vibrating. Also one can hear a "deep" humming noise which seems to be coming form the fan/fans belt etc.
View 9 Replies
I have a 2000 Corolla CE with 48k miles. When braking hard, the pedal vibrates and the brake performance was not that good. So I had the mechanic replace the front calipers (L&R), both brake pads on front, and rear drums.
After that, when braking, the pedal vibrates...but not that much. So I had the mechanic replace the front rotors (L&R). Now, when braking, the performance is good and it does not vibrate.
However, if I brake really hard...there is a little bit of pedal vibration AND shaking steering wheel. My car also needs an alignment since it pulls to the left (will get one on Friday).
Do you think the shaking steering wheel and the slight pedal vibration is due to the alignment or maybe the rear rotors need to be replaced? When traveling at 70mpg, sometimes the steering wheel slightly (very slightly) shakes....my guess this the tires need to be balance/alignment.
View 2 Replies
I just recently bought a 2000 Explorer, 4.0 OHV, 4x4 with about 150,000 miles.
I've had the vehicle for about a month, and ever since I bought it, it's had a grinding sound (sounded like wheel bearing) coming from the front right side. I replaced both right and left bearing/hub assemblies, and took it out for a drive. The initial sound that I thought was bearing noise is still there, and at about 65mph I started to get a little bit of steering wheel shake. I took my foot off the gas and it stopped. I accelerated up to about 70mph and it seemed ok.
I hit a VERY small bump in the road and the steering wheel started shaking like hell. So bad that I almost lost control. I slammed the brakes and the shake stopped instantly. I took it home and put it up in the air, half expecting to see something loose or broken, and everything looks perfect. I re-torqued everything that I had taken apart for the initial hub/bearing replacement, and took it out again. Same issues.
I never had ANY of these problems before I replaced the hub/bearing assemblies, so I'm completely confused. I was thinking CV joints, but I have no clicking at all when turning, in forward or reverse, everything is smooth. Outer tie rods were done about 6 weeks ago..
View 1 Replies
Not so simple as an unbalanced tire. Left front wheel/tire starts shaking at about 35 mph, worsens with increase in speed up to 52 mph then quits shaking. Some residual (though minor) vibration after that. Had tire balanced already at a good shop so I don't think that's it.
Struts are due for replacement - could that be part of the problem? I've had the thing on a lift and don't see anything indicative of a ball joint or an a-frame bushing, BUT, is it possible/probable that my problem is one or more of the latter problems combined beyond the tire issue?
View 2 Replies
My car has shaken from the start but I thought it was because it was a small car that was a great price so this is how it ran. Today it started shaking so badly up through the steering wheel that I was afraid to drive it. Still am. I got the tire pressure checked, the wheel balancing checked - all ok. Took it into the dealership (car is still under warrantee) and they think it's likely the drive train/drive shaft.
View 3 Replies
I just noticed today that when I let of the gas my steering wheel will shake a little bit and when I let off the brake after I come to a stop light my steering wheel would shake. Why the could be happening. Could it be from a bad axle, alignment, something wrong with the brakes, bent wheel, balancing, or something.
View 3 Replies
I have had the O.Z.s balanced about # more times since. The front end is fine, new bearings, new control arm bushings. I have the necessary parts (aftermarket conical bolts and hubcentric rings). There are no noticeable bends or dents in the rims and it's starting to get annoying..so, should I get rid of them or maybe there is something that I'm missing here. Could the wheels just be bad.
View 24 Replies
I had a VERY bad leak, to the point where I would fill it, an hour later it all leaked out. I had a mechanic work on it, and he rebuilt the PS pump, BUT the pulley was cracked, they DON'T make that size anymore. He put a bigger one on, only to find out, it was rubbing on my brake lines so I couldn't drive it! SO I had another grease monkey work on it, went through a few new pulley's FINALLY found one! BUT went through 4 Serpentine belts!!
After 3 months with NO VEHICLE, we finally got it all back together. BUT now it is not all lining up we couldn't tell until we had the belt on. it is about a 1/4 of an inch to much to the right.
I'm thinking maybe washers or spacers would work?
View 4 Replies
I now have 14500 miles on my R and took it to the dealer Monday because the brakes are shaking the steering wheel again. After I had my R for 3 months and a little over 2000 miles it was taken in with this problem and the dealer turned the rotors. Everything was fine for about 3 more months and now had 5000 miles the brakes started to shake and grind real bad. I took it in again and this time the rotors were replaced. It was good till a month ago and they started to screach when I stopped and shake the steering wheel when I touched the brakes. So this is the 3rd time I have had brake problems and 2nd time the rotors need to be replaced. They can't tell me why this is happening. I was asked if I do a lot of hard driving, and I told them that I average almost 25 mpg and you don't get that driving super hard. I drive 76 miles round trip to work and all but 4 miles is highway with only 3 stop signs so it is easy to average that. I don't know how long the warranty will keep covering rotors if they can't find the cause. I love my R but I am not going to pay $700 - 800 or more for new rotors every 8000 miles.
View 21 Replies
I had a problem with my steering wheel shaking at various speeds. Eventually I found a bad inner tie rod and replaced it. The shaking is gone, but whenever I get over 70 mph there is still a very small vibration. I had all 4 wheels aligned after changing the tie rod. Tires are brand new, less than a week old. The mechanic checked my ball joints while doing the alignment and said they were good. Could my struts be causing the vibration? They need replaced, not sure if the previous owner ever replaced them and the car has 225,000 miles.
View 3 Replies
I am currently running 8mm ECS spacers in the front and 17.5mm ECS spacers in the rear. My Summer set up is still stock BBS RC's, but my winter wheels are Lenso's.
Last winter was my first winter running with the Lenso's and had no issues. This past weekend I swapped out the BBS's for the Lenso's, and now I am feeling vibration above 60MPH. I felt no vibration with the BBS's. I just took them in to get balanced (maybe a weight fell off-idk), and they were within 1/4 of 100% balanced. They then thought it may be the spacers I'm running so they cleaned them up, but said that it didn't work.
My alignment is also spot on-so that's not an issue either. I am at a loss as to what would make me feel that vibration after just changing out the wheels.
View 7 Replies
I'm almost at a lose here. I have a 01 1.8t golf and at 60 the steering wheel shakes and at 80+ i feel it in the whole car. I've already replaced both axles, wheel bearings, tie rods, ball joints, new coilovers, new wheels and tires, and passenger side control arm. There's not much more I can replace besides hubs and driver control arm or do u think it could be defective parts like one of the new axles.
View 9 Replies
My 1.8t gli is giving me this issue, when braking (specially hard) my steering wheel shakes side to side, my rotors got changed less than 20,000 miles ago (all of them) and they seem fine right now.
Could this be my Tie Rod ends? The car has 110,000 miles on it, and i know some bushings if not all need to be changed, which I am gonna be installing when i put on the Raxles i just got.
View 8 Replies
I've got 2 identical 01 models with 150-200k miles that are having issues with the steering wheel chattering and shaking occasionally, like a pump is gravitating or something. I've only noticed it at low/no speed when turning the wheel. It shakes for a second or two, then quits. No fault lights on, and no codes pulled with mini vci...
View 8 Replies
I have a 05 gli w/ 65k miles. I got new plugs gaped correctly and new coils. When I'm idling at 7-800rpm my steering wheel shakes a little and when I flip on the ac it's even more noticeable. So much the rear view mirror shakes just a tad. What do yall think it could be cause it's not that bad but I'm anal about my cars and I want it to be perfect.
View 11 Replies
What could cause shaking in steering wheel at like 100-120km/h ? I also feel some vibrations in my ass at this speed as well. Perhaps unbalanced tires? I don't know how this SUV stuff works yet...
View 4 Replies
I'll try not to post an entire book.. But I bought a 2000 F250 not even 8 months ago, it did have issues before but I changed out the spark plugs and coils and it fixed it's original missing issues.. I also just recently changed the fuel filter but it didn't fix it's new problem.. It drives ok around town but if I get over 35 mph it doesn't run well... If I try to keep a steady foot on the gas but don't get the RPMs over 2000, the RPMs will stay where they're at for just a second then they will drop down and the whole truck starts shaking.. I push more on the gas and it shakes even more and the RPMs don't move at all until I really step on it.. It lacks in power going up hills as well... The dealership i bought it from said the Catalytic Converter was bad but my uncle who is a mechanic says it isn't.. It's the first vehicle I've bought so kinda wanna make it last..
View 11 Replies
700 miles ago I got new brake pads on all 4 wheels and new rotors on the rear wheels. 700 miles later the steering wheel still shakes when braking at above 60mph speeds. Also there is still a squeak sound coming when braking. Do I need to give the new brakes and rotors more time to adjust or were they installed wrong?
View 7 Replies
I had a balancing problem with some tires I bought with the car. At about 80 they shook and hard enough to not want to drive at that speed. I replaced them with Falken tires and it was so much better, but......
At 75-82 mph I still have a shake in the steering wheel. I bought the tires from Discount and they claim the rim is bent and they cannot completely balance the tire. I am going back once more to get a definitive response.
I am at a loss at what to do next. My other Lexus was smooth at any speed, even at 90. Smooth. 2007 Lexus es350
View 10 Replies
I got a 2003 Hyundai Tiburon GT v6 and it starts humming after 40 mph and then the steering wheel shakes too...
View 3 Replies
