So, in the last month or so I have been having trouble getting the car to go into second gear when mashing the go pedal. I have to try several times and seems to be that the car has to unload and then it will shift.
I am using the DG shifter and have been for 30k+ miles and I have the red HPA dogbone insert. The shift has not been a problem up until the last month or two.
Is it time for motor mounts?
So i was trying to adjust my freinds shift linkage on his o2j and i got a little ahead of myself and forgot to put the shift tower in the home position before making the adjustment. after i realized you can't shift into second ( either that or 2nd and 4th are extremely close together now and feel like the same gear ). I try to get it in home position even with the cables off ( did this for experimentation) and still wouldn't go into home position...meh. still have all the other gears including reverse .
View 4 RepliesOk so lately I noticed a horrific rattling coming from the rear of my car. It happens mostly when I'm in a high gear going slow with a load on the gear. It's sort of like the rattle that comes from the exhaust with the same gear load but it's much looser and rattley sounding, and it doesn't always do it. It almost sounds like a piece of sheet metal in my spare tire well rattling when there's a gear load and the exhaust rattles. But I checked in there and it seems tight.
View 5 RepliesInstalled the wastegate actuator rod rattle clip on their R? I've been getting a buzzing sound under light load in first gear- very audible when it echos off a wall, etc.
[URL] ....
Background facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
Having clutch issues? I have just put 10k miles on my JSW and the clutch feels like it slipping in 1st gear when heavier load(uphill ETC) is present its even worse. We have never drove it hard pretty much cream puff.
View 9 RepliesSo my MK7 GTI is my first manual car...And I am having trouble doing slow speed maneuver most of the time...
I often found myself in a situation where the speed and the rpm of the car is too low for 2nd gear, and when I try to shift to first, it would't let me, unless I almost come to a complete stop....
I tried to press the clutch all the way in, then rev up the rpm, then release the clutch, but it doesn't work much, the car still jerks...
When I shift from first to second gear, especially when the car is still cold, I get a vibration(?) feeling through the shifter. I'm not shifting hard but not slow either. It's definitely not a grind but it only happens when shifting from first to second.
FYI- The car has ~550 miles on it.
I just finished the DG install yesterday. I am having a real problem with the first gear: it is really hard to shift into it (I mean hard!) - and several times I went into 3rd believing it was in 1st, while driving. I know that the DG is notchy and a little stiffer (which I like) but this does not feel right. I have to really push hard (moving slightly toward reverse) to shift into 1st. My wife would never be able to find it or shift into it (not that I let her drive my R that much...).
Note that all the other gears (2,3,4,5,6 and reverse) shift beautifully without any effort with that nice click. But not 1st.
What is it? Adjustment? I did it twice. I made sure that both cables were "all the way in" before tightening the first two bolts (and I made sure that the cables were not moving - a common problem with this install) with the engine lock on and pin in.
2011 TDi 6 Speed (Sportwagon) with problems shifting into 2nd? Mine is currently in the shop under investigation for a balky shift when cold. The tech says it's not right, but then they find another vehicle in inventory with the same issue...currently waiting on a VW engineer.
View 16 RepliesSo after my 500 mile break in I decide to see what my new set up is made of. Had the kinetics stage 3 and the south bend stage 3 clutch installed. Did my first launch...everything went great. Got just a little bit of spin and the car took off like a scud missile. Right as Im going to shift into second my Rpms go down fast. No weird noises no metallic sounds nothing. No fluid under the car. Only a slight clutch smell nothing crazy. Car wouldn't go into gear. Shut the car off and it goes into gear.
View 20 Replieswhen i shift from 1st gear to 2nd gear, above 2500 rpms i get a really bad grinding, i am just under 50,000 miles so it is going to the dealership to get fix. It also kicks me out of second gear some time.
View 24 RepliesSometimes when I shift from first to second and second to third I hear a clanking noise coming from under the car. It happens when I move the stick and clutch pedal is fully depressed. Doesn't happen all the time and doesn't happen in gears 4-6. Something I should be worried about? Car is stock and has about 1k miles. It's been doing this since I bought it.
Also get a deeper boom noise coming from back sometimes when depressing clutch petal when under boost. Think this is normal tho? My BMW used to do the same thing.
I just bought a 2012 R last friday. 14k on the odometer.
Car is perfect, cept when i shift into 6th its really grabby with a grind. does it every time.
should I take the car in to have it checked out, is this normal?
yesterday got the car tuned. Stage 2 APR, it's a 1.8T 5 speed and I only have 2 real issues with the tune.
1. They forgot left foot braking(I think I can call APR to have this sorted)
2. When accelerating hard and shifting a gear, no matter how you try it will not hold boost through a gear changed. Turning off ASR improves this greatly but it still purges pressure and as a result the car falls flat on its face. Then it spoils up and same thing in the next gear. Trying to hold wide open throttle through a gear change does not work as I believe it feels like the pressure plate isn't able to engage fast enough. It is a full on loud pshhhh purge could a possibly higher PSI Diverter Valve fix this.
No other APR car I've driven does this (given they were MkV and MkVI). I'm not quite sure what is different with the motor unless the stock Diverter is strictly for economy and as soon as you don't need boost it purges? Not really sure
Started noticing an issue with my trans awhile ago, the other day it stopped shifting out of first when cold. It's a 1.8T auto 5 speed tiptronic, it's the Jatco 09A. I know the shifting problem is the solenoids and it doesn't look that hard to swap them out. The trans shop said it looks like there is slippage on gears 2-4 and the fluid is toast. Looking at replacing or rebuilding, shop said 4-5 grand, how easy would it be to swap in a used trans? And what kind of issues would I be looking at?
View 1 RepliesI replaced the old auto trans that was slipping in my 2000 golf with a same year auto trans from a beetle. The beetle had 115k miles and the PO toasted the 1.8t. I replaced the TCM also and when I finished the install I took it out for a drive this afternoon and when I shift it into drive it starts out in 3rd. It will manually shift through the gears but it will not shift from 3rd to 4th. Could I have left something unhooked? Is this a solenoid issue?
View 10 Replies2200 Miles... It will not shift into 2nd gear in automatic and the rpms race up to 4000 when going about 20 mph. The only way to get it to work again is turning car off and on again. It has only happened twice.
View 7 RepliesI've just got my 2015 GTI a few months. I'm driving manual with my GTI daily commute to work, getting along well. However sometimes I'll be struggling with the manual when approving a corner or a stop, and I'm not having a smooth up shift with 3rd and 4th gear (odd eh? most of the people will have difficulties starting up but since I've been taught so I'm fine...)
To be more specific:
1. Just want to know what REV usually will be done? e.g. 3rd gear with decent speed, would you maintain it until it revs up to 3k? or would you up shift when passing 2k+? Usually I'm doing the latter so I guess this is why I'm having a sluggish/jerky up shift with 3rd and 4th gear. And would you still put on a little bit gas when engaging with 3rd and 4th gear?
2. What to do when approaching stop? Assuming you don't have enough distance to down shift each gear. EITHER: Break with the current gear and clutch in until it reach 1k rev and complete stop; OR: down shift at least once to a lower gear and break until complete stop?
My buddies Jetta won't shift into high gear. I am going to take a look at it this saturday to find more out.
View 4 RepliesWhen I'm driving, the Jetta will sometimes not shift from 3rd to 4th gear, so I just turn of the car a start it and it seems to work, but eventually does it again. Once it is in 3rd gear it does not downshift and stays in 3rd even when stopped. The trouble code is P0785 which is the shift/timing solenoid. Not sure if I need to get a new part or which solenoid to get. Also I cannot figure out where this solenoid is actually located or what it looks like.
View 1 Replies