Golf VI R :: Stops Accelerating At 135 MPH - No Turbo
Nov 17, 2012
I got my R flashed about a month ago and decided to do a little run 2 days ago at my local track (BYW I am APR stage 1+) Because I thought the software removed the speed limiter of 125 MPH, I was suprised when car got to 135 and completely stopped accelerating. When I slowed down, it was like the car had no turbo. I would press on the gas and it would barely move.
Idk if it was the turbo or the software. When I stopped I turned off the car and turned it right back on and BOOM, it was back to normal. So yesterday, the same thing happened at 110 MPH and I restarted it and everything was back to normal but now the Engine Malfunction Light is on but everything is working fine.
View 24 Replies
Advertisement
yesterday my r began making a new buzzing sound when accelerating. ive researched and i guess it does somewhat sound like a quick blow into a harmonica. I am pretty aware of the sounds my car makes and am sure that this is completely new. the noise only occurs under load around 2800-3000 when boost comes on and then things go back to normal.
i have been tuned UM stage 1 since july and have never experienced this noise before yesterday.
View 1 Replies
There's this 1.8t gti I'm buying this week from a family member and we've been trying to solve an issue that we ran into. When accelerating the car there is a hissing noise, safe to say that it is air. Then when accelerating a little harder and you feel the turbo pulling you everything seems fine. But a second or so after , the turbo dies off and so does the hissing noise. Then I can let go of the gas and repeat the process and it happens again.
My issue is that I cant figure it out since I Need to be driving to hear the hissing and the turbo cut off. I looked around the threads but nothing really seems to match my issue. No codes either. On top of that I've never owned a 1.8t and don't know much about its turbo.
View 6 Replies
Quick q recently just got a gli and I've noticed a knocking sound when accelerating and shifting from stops could this be my motor mounts ? I was thinking my tranny or clutch but everything runs smooth and goes into gear fine...
View 1 Replies
I have a 2004 VW jetta GLI 1.8 turbo and when i get it to about three and a half grand it feels like my turbo is giving out, all acceleration stops. But I doesn't do it all the time, meaning not every time i step on the gas, like I can step on it all through first and second, and it will do it in third or visa-versa. Which leads me to believe that it could be a fuel delivery problem but I don't know, im new to the VW game. The check engine light will come on while the car is bogging down but as soon as the rpms go down it will turn off.
View 1 Replies
I have a 97 metro runs good but when accelerating over 70 when you let off engine shuts down for a few seconds then takes off again. Replaced fuel pump and filter to no avail. It must be a fuel problem no misfire.
View 11 Replies
What could be causing my turbo to be fluctuating while accelerating? I can definitely hear the difference in the sound of the air and today while towing my camper I could even see the dash gauge bouncing around some.
View 8 Replies
I have 02 GT 3.8L with 130k on it. When I accelerate it shakes extremely bad and when I let off the gas it stops. Is that a broken or worn CV joint or something else. And if it is should I replace both sides?
View 2 Replies
Car just stopped accelerating on highway. It starts again after about 10 minutes. Also the wheel gets stiff when it stops accelerating. What could be wrong?
View 3 Replies
I need diagnosing a problem on my 2002 Hyundai Accent LC. When I accelerate with the aircon on the engine stops accelerating at high RPM and when I accelerate from a stand still the engine hesitates and jerks! I don't understand what the problem may be coz it works perfectly after a cold start but after it warms it starts doing that.
View 3 Replies
While driving, the TCS light will flash and the car stops accelerating. Dry pavement, no bumps. I have to pull over to the side of the road, and shut the car off and restart, or wait a few minutes for it to stop having a fit.
I really don't feel save driving this car due to this issue. Is there a specific sensor that can be changed out or is this tied into the ABS and possibly individual wheel sensors.
View 5 Replies
I have a 95 chrysler lebaron that stops accelerating while driving. I have had the fuel pump replaced twice in the last year and now it is acting up again! It jumps and then gives up. I have not noticed any other signs that happen.
View 2 Replies
Quick q recently just got a gli and I've noticed a knocking sound when accelerating and shifting from stops could this be my motor mounts ? I was thinking my tranny or clutch but everything runs smooth and goes into gear fine
View 5 Replies
2001 F150 5.4 v8 ... In the past few months my truck has been a bit strange, but in the past few weeks it's gotten to the point I'm nervous to drive it. Usually when shifting around 30-35, the engine revs up and stops accelerating and I have to take my foot off the pedal to make it return to normal. It doesn't do this after I do that, but the past time I tried to drive I couldn't get above 35 and the rpm was in the upper 2000s going at a constant 35. When I stop for any reason such as making a turn, when it shifts it lurches forward and I hear a loud clunk.
Naturally, I've checked all the fluids and fuses and they're all fine. The mechanic I regularly visit insists that nothing is wrong with it.
View 2 Replies
I have a 2005 F250 with 186K miles. I do minor work on my vehicles but have little experience working on my diesel. I was accelerating when I heard a pop and a hiss similar to disconnecting an air hose from an air compressor. Total loss of turbo power. No turbo reading on the turbo gauge on dash. No loss of oil. No smoke. Oil and coolant look fine. Took off turbo and everything appeared to operate like it should (according to YouTube videos). Inspected lines and rubber boots.
Rubber has some cracks but not certain if they are holes. How small/large of a hole would cause total loss? Was originally scared to take it to a shop knowing they could name their price. Not opposed to taking it somewhere now knowing the turbo works but obviously would rather save the money. Any tips on troubleshooting? I'm not opposed to proactively replacing parts/sensors as the truck has given me 186k and I plan to keep it as long as possible.
View 8 Replies
Noticed this to be a problem with our older 2011 Accent, now with the 2012 Accent.
The car has a rough idle usually in mornings, it seems like it is going to stall at stops, it also has a tough time accelerating.
The computer scan does not show there is anything wrong until the problem becomes worse.
This is what I have discovered through the 2011 Accent. Car will stall at stops. Very inconvenient in rush hour traffic. Until they replace the Crankshaft Point Censor, the problem would not go away.
I would insist on looking at this rather than replacing sparkplugs or having any other service performed if one is experiencing these same symptoms. The good thing is it is under warranty.
View 1 Replies
Well I am not sure if i have trans problem or not. If I put the trans in drive and go through the gears when the RPM's get to about 2000 the truck almost stops accelerating, until you give it much more gas, this happens in every gear. but If you push the button to take it out of overdrive and drive like that it doesn't do it.
View 1 Replies
As I was getting ready to leave town with the tractor loaded up, I was accelerating with the turbo spooling up when I heard a bit of a pop and lost power (engine still running and all, just very low power like you get when the turbo fails). I wasn't far from the shop so I came back and started getting a lot of white smoke out of the exhaust, it doesn't smell like diesel, probably more like oil. Definitely smoke, not coolant. I pulled it around back and shut it down to go grab AE and scan it and it shows a P0475, starting it back up has light smoke at idle and it idles fine but as soon as you give it any throttle it starts smoking pretty badly.
Researching it looks like the most likely cause for this is the EBPV itself but before tearing it down that far. This is the only code it's showing.
Truck has 272k on it, turbo was rebuilt a couple of years ago but we didn't do anything with the pedestal at that time. I guess in retrospect, I probably should have done the EBPV delete and the resistor fix then but I didn't think about it at the time.
On another note, my AE is not showing any of the system test for some reason, the drop down is blank. I have version 7.0.1, so it's an old version but I'm working on an old truck, so... What that might be? I've got the truck pulled into the shop now to let it cool down. I'll probably let it sit overnight and take the turbo and EBPV out tomorrow unless someone has a better suggestion...
View 14 Replies
Will a 2011 Chevy Cruze 1.4L turbo engine wear out / break down / fail sooner than a 2011 Chevy Cruze 1.8L engine ( w/o the turbo ) ? Both being automatic transmissions. Driven by the same person. What is the gas mileage difference between the same two ?
View 17 Replies
What is the point that the headspacer fitment doesn't affect the fitting of the upper timing chain considering that the time chain rails etc are brand new also i have seen fitment with a 2mm headspacer plus a spilt oem headgasket which is rougly 0.65mm to give 9,1:1 cr if i am not mistaken,is this the limit then if going with two full oem headgaskets and a 2mm headspacer which will give us a result of 8,8:1 cr do u think that the timing chain will not fit?
View 1 Replies
So yesterday i decide to race one of my friend and a couple of seconds later i get a CEL. So today in the morning i went to autozone to check what the problem is with a scanner and i get this:
Did i f up my turbo? I am APR 2+ with only 4700 miles, what should i do?!
View 22 Replies
