I am currently stage 2, drive my car kind of aggressive on a regular basis, and now I hear a squeal under high boost, sounds like air escaping. Boost is not acting any different, I've come to the conclusion that the problem is most likely my revision D DV.
-What does failing REV D sound like???
Well, since I replaced the MAP hose a few weeks ago the old girl has been running fine. Until yesterday. I was leaving work and she had low boost, less than 10PSI, and as I passed by a parked tractor trailer I could hear the sound of high pressure air escaping because I had my window rolled down.
So today I checked it out. I found three possible leaks spots, BUT no "smoking gun". Take a look at the pics. The damage you are seeing is on the outside of the hot side boot at the turbo and the bottom of the cold side CAC tube. The cracks don't appear to penetrate to the inside. Could these still be possible leak sites? IDK.
I'm going to order replacements anyway. Ford wants WAY to much for these parts. I checked the MAP hose and it is just like new from several weeks ago. Also, I inspected the inter-cooler as best that I can without removing it. I don't see any issues with the tanks or the tank-to-core mounting. It all looks normal. If it does fail where does it normally fail at?
2003 jetta gls 1.8t 5spd - gts stage 1 tune(gonzo stage 2)
tt 2-1/2" downpipe with high flow cat
turbo smart splitter valve(set to divert only)
turbo inlet pipe
homemade intake with k&n filter
stock n75 valve (f)
So in first through 3rd gear my car gets 20psi of boost then at 3,500 ish rpm smoothly starts to lower down to 15psi. but in forth and 5th gear the boost drops faster, enough so the diverter valve actually opens. then the boost will bounce up and down, around 15psi. the car still accelerates but with obvious power loss.
Is my diverter valve not "firm" enough? it is adjustable, so I've tightened it as much as it can. it doesn't seem to change anything. it came with spring spacers to make it tighter, but I haven't tried that yet.
Is it something with the tune? not enough fuel, need bigger injectors? The problem is only at about 100mph, so its not a big deal. I would like to get it straightened out if possible.
While driving home tonight in the snow, about half away home I noticed the most god awful high pitched squeal sound coming from what sounded like the back passenger side of the car. The squeal was so loud it made me cringe. I couldn't really get any near 40 mph because I could hear it start and instantly it would become really loud and would only stop when I slow down almost completely and then maintain a speed around 30 mph. It's pitch black out so I couldn't conduct a real thorough inspection however a quick look over and I didn't see anything wrong.
View 22 RepliesHave a very high pitched squeal on cold starts as well as when idle occasionally.
Bad compressor?
I bought the 2 door 2012 Golf 3 weeks ago and I noticed that whenever I roll the passenger window up or down, there is a high pitched squeal somewhere, I think out of the speakers. It's kind of annoying. If I knew the problem, I could just add a low pass filter, but I don't want to really go that route.
View 3 RepliesI recently noticed that my Golf R was making a strange high pitched whine and it seemed like there was no boost. I took my car to the dealer, and it turns out that part of the CAI broke off (a mounting component) and made its way into the turbo, effectively destroying it.
My dealer was initially intending to cover the turbo under warranty (prior to investigation), but now that it is clear that a failure in the CAI caused the issue, they cannot (obviously) cover it under VW warranty. Unitronic CAI failure led to turbo failure.
The serviced manager did some research prior to getting back with me, and was somewhat puzzled since the Unitronic CAI displayed on their website looked slightly different from mine in that the component that failed was not there. The service manager called Unitronic and learned that the failed component was a known issue (it had apparently failed before), and thus they modified the design - hence the picture of the revised version did not match the older version that was installed on my Golf R. The Unitronic rep offered to replace the CAI - but did not mention anything about the failed turbo (when he spoke to the service manager).
I found the following thread which illustrates that this was a known issue: [URL] .... I just wish I had found out about this before it failed.
Car started to do some weird stuff today. Misfiring under high load, as I get into boost.
Idle is around 1000-1100 RPMs. Cold start is fine, idle is normal in terms of going higher a bit, but then it sits at 1kish. This started last night after the car sat for a couple hours. Totally normal running and driving prior to this.
I've seen all the MKV threads about it that suggest everything from battery, to alternator, to grounds, to vacuum leaks, to intake leaks, to MAF.
I'm having a strange, very high-pitched, noise that seems to be coming from my turbo or (possibly) somewhere else in the engine bay. It sounds very screechy, and it may be paranoia, but I believe it also may have a slight metallic sound to it.
It all started yesterday after changing the thermostat housing for the third time in 2 days (autozone sold me a faulty, warped, housing that leaked after install). During this repair the engine never overheated (it did however leak fluid and go a little low) and the main point for replacement was a stuck thermostat. After finally getting it fixed I took it for a test drive and noticed the horrid noise after hitting a good amount of boost (no gauge installed). The noise occurs when boosting and doesn't happen when spooling in the 3k-4k range. I had no hint of the noise before this.
There doesn't seem to be any drop in performance and it still pulls hard. Hoping this to be a loose exhaust connection or boost leak. May be spooling sound escaping.
Mods:
- short ram air intake with an aem filter
- 3" turbo-back exhausted
- revo chipped
- 4 bar fpr
I'm having a misfire issue on my 1.8t. When I go into high boost I'm getting bogged down and misfiring.
I plugged in my obd2 adapter and it gave me a misfire on cylinder 3. I since cleared the code to try and see if it was a coil pack by switching it to another cylinder, but now the cel won't come back on although the problem persists.
I have recently changed the plugs and the car was fine. I then added a fuel injector treatment and the misfire started shortly afterwards. (coincidence perhaps). It's frustrating as I can't rule out coil packs as my cel won't come back on and my code reader is not displaying any faults.
I did previously have a cel with something about fuel trim bank 3? I am also sure I have a boost leak as the car whistles pretty loud under boost.
Also worth mentioning I have a bit of white smoke sometimes but I'm not using oil or coolant and they are not mixing either. I'm at the end of my tether with this car and just want to try get it back to normal.
The symptoms are as follows.
-No change in performance, functionality, or spooling.
-Loud intermittent screeching noise when building boost above 3500 RPM
-Can only describe the sound as air escaping from a tiny hole, VERY similar to warn brakes, that kind of screech. The intermittent part I would describe as if you were tapping your brakes (and they were screeching) rapidly, so on off on off very quickly.
-Also happens when I let my foot off the gas (Also above 3500 RPM)
-Car has CTS Turbo Intake, 42DD Downpipe, and APR stage 2 software.
Under acceleration I hear a weird noise coming from the front right side of the car. Almost sounds like if air is escaping from a tube or something of that matter. Only mod I've done is the noise pipe delete. I made sure when I did it that everything was put together tightly and securely. What it may be or is this a normal sound? It's not the turbo spool, it's DURING acceleration.
View 24 Replies I have a golf mk4 1.8T AGU, about one week after i had my k04-023 turbo on and all the Stuff that comes along it started "stall" (don't know if its the right word??) in the High gears, most 5th gear but it first start doing it when i hit boost (3000rpm)
I runs on Stock n75 valve.. I though i could be a boost problem, maybe the Stock system cant handle it? I did install a boost gauge to see if it was the was the problem, and it dont Seem like it. In first it runs from 1.4 bar and drops to 1.2. Same in second and third. But in 4 and 5th it goes to 1.7 bar and drops to 1.4.. I did wonder it maybe the n75 valve cant handle 1.7 bar??
Its actually on a 2008 E350 with a 5.4 but figured its all the same. There is a squeal that sounds like a bad pulley but its coming from the flexplate or torque converter. I have taken the belt off to verify. I dont see anything psychically wrong like cracks, bends or anything touching. The little I can find on this subject I would say flexplate has a crack somewhere. Transmission shop also can not figure it out. I just want assurance before pulling the transmission in this beast.
Here is a video : [URL]......
After about 1 minute after starting the truck it sounds like the fan belt is squealing..(below 30 deg outside) Only its not the fan belt as I replaced it. Does not do it when it is engine is operating temperature. Have checked all of the Pulleys which seem to be all right. The frequency of the squealing sound is about 1/3 the engine RPM and will go away above 2k when it does do it. Stopping at a stop light after about 45 seconds it really starts to get loud. Can a Fan Clutch do this.. I beleive that this engine has a timing chain right?
View 8 RepliesExperiencing a squeal under hard acceleration at 3000 rpm with roughly 20lbs of boost, not present before and not present after 3000 rpm. light acceleration to 3000 rpm does not create sound, as well as turning 20lbs at a lower rpm (higher gear with throttle input). Truck has an EGR delete, EGR delete up pipe. EGR valve is still in place and plugged in. Truck did come with a banks six gun, so does not have EGR delete tune, however no trouble codes are present. What to check?
View 9 RepliesDriving yesterday with A/C on & I start to hear this high-pitched squeal from the engine compartment. It sounds like an annoying cell phone ringing constantly.
It only occurs in motion under full or partial engine load (or in drive w/ PB engaged) with the A/C on. It's coming from the front of the engine compartment.
I recently purchased a used 2009 Kia Rio. I really am enjoying the car. While there is nothing fancy to it, it gets me to and from work and that's basically what I need. However, when I apply the brakes, there is a high-pitched squeal that is made until the car is almost at a stop. It does this I would say 90% of the time. The brakes work just fine and are in fact very sensitive. I've tried researching this online and it seems a lot of people have this problem because of the type of brake pad used. The dealership I purchased it from is more than an hour away from my home, so I am reluctant to drive down there if there really is nothing that will be done.
View 3 RepliesSo, last week, I heard this high pitched squeal coming from the wheel well. At low speeds it seemed. It was in a parking garage.
But then, it disappeared. All of a sudden, I'm reversing into a spot barely touching the brake and it's squealing again.
I then take it again for a spin around the garage, no sound. I reverse again, no sound.
A few days later, I'm pulling out of the garage and the sound is so loud my GF could hear it from within another car behind me. It squeals until I start going faster and I'm on the highway. I get to my destination, ask my friend who is good with cars to check it out. But of course, I couldn't recreate the sound. Tried going slow, backing up, braking, going faster, etc.
So, do you know of a sound that would be very loud one day and completely go away the next? I saw some things about a shim or clip on the brake pad possibly touching the rotor or is loose?
I did a search for this symptom but didn't see anything that sounded right... High pitched squeal from right front wheel well area (sounds like a tea kettle actually).
Starts at 10+mph and is speed variable (faster=louder)... but not effected by applying the brakes (so doesn't seem to be related to the brake assembly)... It doesn't happen all the time... but getting more frequent... annoying...
wheel bearing?
air suspension?
What it could be?
Yesterday I heard a high-pitch noise/squeal coming from the vehicle and after some searching, figured out it was from the ventilation fan. It went away after 5 mins of being on but is rather annoying. Not too keen to take it in as I'm sure the dashboard will need to be removed and afraid it won't go back in perfectly.
View 7 Replies