Golf VI R :: Really Hard To Shift Into 1st Gear
May 19, 2014
I just finished the DG install yesterday. I am having a real problem with the first gear: it is really hard to shift into it (I mean hard!) - and several times I went into 3rd believing it was in 1st, while driving. I know that the DG is notchy and a little stiffer (which I like) but this does not feel right. I have to really push hard (moving slightly toward reverse) to shift into 1st. My wife would never be able to find it or shift into it (not that I let her drive my R that much...).
Note that all the other gears (2,3,4,5,6 and reverse) shift beautifully without any effort with that nice click. But not 1st.
What is it? Adjustment? I did it twice. I made sure that both cables were "all the way in" before tightening the first two bolts (and I made sure that the cables were not moving - a common problem with this install) with the engine lock on and pin in.
View 22 Replies
Advertisement
Background facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
View 9 Replies
2011 TDi 6 Speed (Sportwagon) with problems shifting into 2nd? Mine is currently in the shop under investigation for a balky shift when cold. The tech says it's not right, but then they find another vehicle in inventory with the same issue...currently waiting on a VW engineer.
View 16 Replies
01 jetta vr6 5 speed. Alright so earlier today I pulled out the driveway. (Hard) was in 1st gear around 3 or 4 grand and I stomped it. Got to 6 grand and hit 2nd. Took 2nd to 6 grand and let of around 60 mph. After that I short shifted into 3rd, 4th, then 5th. I noticed going into fith was hard. Had kinda rev match to get it. I stayed in 5th till I got to my destination roughly 4 miles. When I came back out to leave I had a hell of a time getting it into reverse. On my way home it was extremely hard to shift and now when the car is running I cant get it into any gear. This is what I did.
Car shifts fine with car off.
Car will not shift with engine running.
When started in gear with clutch depressed I can still let the clutch out and stall the car.
When starting car while in gear with the clutch NOT DEPRESSED the car jumps forward.
I can figure it out ove tried re adjusting the linkage. Nothing.
View 6 Replies
I have been having an issue with my 4-5 gear shift under hard acceleration and know that a rebuild is due soon but I was wondering if any high performance kit available with all the clutches and friction discs needed to rebuild.
View 6 Replies
Could my brake issue be related to my transmission problem? Neither are constant. Brake problem= sometimes the brake pedal feels hard, like there's no power brakes (I drove a car once. ..looong time ago. .. that had no power brakes or steering) but it will kick in after a short distance. Transmission prob= seemingly unrelated, is a problem shifting from 1st to 2nd gear. This has happened maybe a 1/2 dozen times, the first time and mostly when in heavy commute traffic and when going between 1st and 2nd gear because of the slow commute speed, but also at other times when not in lengthy slow commutes. When it doesn't shift, the odometer doesn't work (shows only dashes) and an engine light comes on (the sprocket/gear looking one). Usually the transmission will eventually shift and the light goes off.
I read that the brake problem might be a vacuum hose problem? Something about a booster? Is this dangerous? or is it like having a car w/ no power brakes? Going to have my transmission looked at this week. Read on another site about dropping valve seats on this year car. If there's a major transmission problem, I'm wondering if it's worth fixing? I changed, timing belt, water pump, front and rears brakes, tires. 143,000 miles.
View 1 Replies
I get a hard shift into second gear, it jerks into 2nd but not all the time. I only notice it after driving on the freeway for several miles. It has 60,000 original miles. Service Engine Soon light come on after the hard shifts with a transmission fault code. I reset the Engine light and let it set 20 or so minutes and it shifts like new.
1997 CHEVROLET TRUCK S10 2WD
6 Cylinders 262 X 4.3L SFI
Automatic
View 13 Replies
2000 ls v8 sport shifts normally exept while shifting into 2nd, it kind of pops out but then locks then shifts normally.
View 9 Replies
My 97 Taurus shifts hard going into 2nd gear only. It started as just a cold problem but now does it all the time and there are no computer codes stored.
View 2 Replies
My Santa Fe 2001 model V6 4X4 Automatic shift gears down hard from 3rd in to 2nd. I checked transmission oil and its light brown. Should I drain and refill or not worth it.
View 7 Replies
I have brand new ( 800KM ) Accent with Automatic transmission and I noticed that it shifts from 1st gear into 2nd kinda rough. By this I mean that I can feel shift pretty good, and I don't feel shifts from 2 to 3 to 4. I don't rev engine high, typically shifts occur when engine revs around 2000 rpm.
I am not sure if it is a transmission defect or this is the way it shifts? May be I need to breaking my car first and it will go away?
View 16 Replies
1983 Celica-Supra P-Type, 38K miles. Garage kept, never abused... I have a really hard time shifting into 4th gear. Rebuilt clutch master & slave, adjusted pedal. Buttery smooth 1st-3rd. 4th does not grind but requires a lot of force to shift. 5th shifts ok, but feels vague; hard to tell it's in gear.
View 13 Replies
2002 Honda CRV. Has 62,000 miles. When 1st started there is a noticeable hard shift from 1st to 2nd. If you drive a short distance, say 2 blocks and come to a stop and take off again it shifts smoothly, will shift fine the rest of the in town stop and go driving. ( Does not matter cold or warm ) If you shut off the vehicle for just 5 minutes. the same thing happens, a noticeable clunk shifting 1st to 2nd. Do notice that the rpms do go up past the normal shift rpm, so if you let up on the accelerator it will not clunk or hard shift. Trans oil has been changed, did not notice anything in the drain oil. Fluid was normal color.Does this transmission have a filter that should be changed? Did some on line looking and see some mention of a linear solenoid?
View 1 Replies
Passat wagon, 2002, 1.8 T engine, 68,000 miles Auto transmission. When I start engine the two warning lights stay on, and then I shift into gear the engine jolts hard. I have parked it for now to learn more about what the problem may be. What is Anti-Slip Regulation and what does it mean when the indicator light stays on?
View 2 Replies
I haven't owned a manual transmission in a while so I need to know if this is normal. When shifting into any gear I have to force the shifter into gear with quite a bit of force. Almost like it's hitting something and then going into gear. There's no screeching or grinding. It does the same thing when pulling out of gear.
View 19 Replies
I have a 2002 Santa Fe V6 2.7 liter, FWD, 215,000+ miles. When it shifts from 2nd to 3rd the whole vehicle jerks. It does not do this on the other gears. I took it by a transmission place for a free scan and they said the transmission is fine.
View 19 Replies
I got a new clutch & shift cables & fluid professionally done one year ago. I have only put 5k miles on it since. In the last two months the... gate/slot for 1st & 2nd have been getting worse n worse. All gears show sporadic rough shifting (read rough as a clunk or one tooth grind), but 1st/2nd are consistently rough & the gate seems to be getting narrower...
Environmental & operating temp, do not noticeably affect these symptoms.
View 4 Replies
I've been have been having a problem with my car. It initially started at Christmas when I went up to MI for a visit. It would have problems shifting into gear after reversing. At first I just thought it was because it wasn't used to the really cold weather as we live in AL.When I returned it still did it, I would try the other gears available on the auto transmission and it still seemed to have a problem shifting from 1 to 2. It would slow down and you could rev the engine and it still would not shift.
All of a sudden it would kick and shift and you could drive. This only happened the first time you drove it that day. It would also kick very slightly when you went below 30mph. It doesn't do that anymore.I went for another visit up north and while I was there it started kicking whenever I was over 60mph. When i got back to AL I took it into the dealership as the check engine light came on. It now kicks all the time regardless of speed, though does it less at lower speeds, but if there is exertion on the engine like a hill, it kicks, kicks, kicks. When it kicks the rpm goes down and up.The dealer said that the things that needed to be changed are:- front assembly trans pump- crank sensor- gasket- oil pan.
I've tried taking it to a transmission place to have just the pump changed for less and all they wanted to do was give me a whole new transmission. This car is on it's third transmission as far as I know and a new/rebuilt one was just put in 2 years ago.After talking with my father (who was a engineer) he told me a way to check if the crank sensor a problem was to have the car in neutral and rev the engine. He said that it would still do the same problems if it was the crank sensor. I did this and it did not kick at all.Is there any real way of knowing if it is really the pump that is causing all these problems or if it really needs a new transmission or something else.
Chrysler Town and Country, 2003, 134K ...
View 2 Replies
I own an automatic transmission 2004 Hyundai Accent with about 180,000 miles. I bought it brand new, but it seems to be having trouble shifting into the right gear. Many transmission "specialists" keep telling me they can't figure out what is wrong, aside from offering to completely rebuild my transmission. The car has the following symptoms:
1. At a stop sign or red light, my car doesn't always begin idling properly. Sometimes it just won't go anywhere at all, even with the motor running.
2. As I drive down the highway, it acts like it jumps into a higher gear for no reason. It sometimes resets itself with no action on my part.
3. The car jerks back and forth, not seemingly due to shifting into gear, but randomly.
4. The check engine light does not come on often, but by the time I can use a DTC reader, the light goes off.
Everything seems to be intermittent, so I can't replicate the problem on-demand for anyone who wants to inspect the problems. Is there anything I can do? Is there an easy way to figure out what's really going on? I'm assuming this is transmission-related...
View 8 Replies
Sometimes (most of the time), when I shift from first to second, its either hard to do or it "pops" into gear. There's not like a grinding gear but it sounds like it is hitting something as it goes into gear. If I go 1st to 2nd while stopped, it goes in nice and smooth. It sort of feels like how you can't shift into 1st while you are moving slowly, you have to push on it a bit and then it finally pops in.
View 8 Replies
At 37 mph and transmission shifts to 5th gear a violent shift occurs. The fist time I thought that I had hit a cement block! It only happens in triptonic or if I leave the shift lever in 4th gear and exceed 55Mph. My local VW dealer said a new Transmission would cure it.
View 8 Replies
