Golf VI R :: Paint Code For High Gloss Black Mirror Cap
Jul 14, 2013
What is the paint code for the mirror caps that are painted high gloss black ? I have to replace mine and they don't come painted smh
View 3 Replies
Jul 14, 2013
Advertisement
Camry 2012+ :: Black Paint Flaking Off The Mufflers
Black paint flaking off the mufflers. I was hosing the car off I hosed the black part of the mufflers and paint started coming off. Looks like hell now. I plan on cleaning them up and putting a few coats of flat black grill or high temp paint on them.
View 5 RepliesLexus RC F 2015+ :: Black Paint Peeling Across The Bumper Behind The Massive Grill?
My RC-F has like 8k miles on the odo. I first noticed it at around 6K miles and I thought my RC-F had picked up some "small pieces of wet tissues or some white paint from road construction". But upon closer examination it is the black paint across the black bumper behind the massive grill peeling the black paint thereby revealing its original white paint.
My front end looks like a Dalmatians dog with black and white spots.
I did not hit anything. Dealer is fixing it under warranty. So will wait and see.
Picture attached..........
Camry 2012+ :: Black Paint On Back Of Muffler Peeling / Chipping
Seems like the black paint on the back of all our mufflers slowly but surely disappears. I'm guessing high heat - flat black (if such a thing exists) would be the way to go.
View 5 RepliesLexus GS 2013+ :: How To Paint Front Grill And Window Trims To Black
what are some methods to have the original chrome pieces such as the front grill and window trims painted into glossy black. I called my paint guy and he told me chrome pieces are not 'paintable' and that I shouldn't go that route.
View 8 RepliesTouareg :: Black Bottom Of Driver Side Door - Flaking Paint?
So it looks like my truck has a new issue. I thought I had picked up some white paint from the road, and somehow kicked it up onto the black underside of my driver's door. When I looked closer to see how I could clean it up, I realized it is actually the black coating peeling off of the white paint. What I have is exposed white body paint in a stripe on the bottom of my door. I checked it a little more closely, and there are several other areas on the door where this is starting to happen as well.
View 13 RepliesLexus GS 2013+ :: Black Spot On Side Mirror
I was wondering do any black color touch up paint works on the black color spot on the side mirror?
View 4 RepliesCamry 2012+ :: Black Box Behind The Rear View Mirror
Found little black box behind the rear view mirror. First I thought it's rain sensor for wiper, but my car doesn't equipped with rain sensing wiper, so what it is?
View 14 RepliesLexus GS 2006-11 :: Rear View Mirror Has Black Skid Marks
The rear view mirror (inside) has black skid marks, lines, and dots and other crap under the mirror surface. It doesn't hinder visibility yet, but I wonder if there will be a recall in the future. Mirrors should have crystal clear visibility.
View 14 RepliesPassat (B7) :: 2014 - How To Get Paint Code
I need to order some touch-up paint for my 2014 platinum grey metallic SE. I'm told I need to find the paint code even though I know the name of the color. Where to find this on the car? Also, where to get touch-up paint? I know I can get it from the dealer, but perhaps it's less expensive elsewhere and/or better quality.
View 1 RepliesPassat (B5) :: 2003 - Where To Find Paint Color Code
I bought some touch up at the dealer and it is not the right shade of gray.
Where can I find the paint code on the car?
I have a gray metallic 2003 wagon.
Cadillac - Deville :: Paint Is Peeling On Front Bumper And Rear High Brake Lamp Is Cracked
Over the past year I have had to replace 2 window regulators, a front motor mount, rear brake reline, new wheel engine bearing, a Plenum, and on top of all that the paint is peeling on the front bumper and the rear High Brake Lamp is cracked! Any connection between all these repairs or just my really, really bad luck?
View 9 RepliesFord F-150 (2009-2014) :: 2013 - Paint Code For Grey Painted 20 Inch Wheels?
Noticed a chip on one of my wheels today and would like to get some touch up paint. What is the paint code or the closest color touch up paint for the grey painted 20 inch wheels?
View 2 RepliesGolf IV R32 :: CEL Code P0103 / MAF Circuit High
About two weeks ago I purchased an intake from a member here on vortex. I installed it, drove the R a few times, and ended up getting a CEL right afterwards for P0103 (maf circuit high). Does this have anything to do with the intake install? Car runs absolutely fine.. no weird issues. Never heard of an intake causing a code like that. Cleared it.. it came back.
View 4 RepliesGolf IV R32 :: Engine Coolant - High Input Code P0018
My cel is once again starring me in the face ... P0018 is the code I got followed by "engine coolant - high input". Where I can buy a book/chart that explains these codes. I'm assuming it is some sort of sensor gone bad but not sure exactly.
View 1 RepliesFord Aerostar :: High Idle / Black Smoke From Exhaust And Stalling At Stoplights
1993 3.0 .... My son's van. He complained of fluctuating and mostly high idle, black smoke from exhaust and stalling at stoplights. He has other wheels so I've had it for several months until I could check it.
I started it every few weeks, it started easily. Have not seen smoke but it did idle high and rough. Yesterday I started it to warm it up to finally pull codes. Temp needle barely moved and upper radiator hose did not get very warm but I pulled codes with engine off anyway and got 116, 10, 111.
Today i got a little smarter and noted that the upper hose began to get warm right after startup. Suspecting a bad thermostat I blocked the radiator as well as I could and it warmed up much more, though still not near the middle of the temp gauge. Shut engine off and pulled codes again and this time got 111,10, 111.
With engine running, got 6, only-- and there's no code 6 in the code reader book. Jabbing gas pedal in neutral it nearly dies, jabbing gas in D and it dies and will not restart until cooled down.
Finally, checked again with engine off and got 111, 10, 110, 10. I think the ETC is OK since I didn't get 116 again but it still idles fast, speeds up and down erratically, and dies. Where do I go from here?
Golf V R32 :: Paint Smell When Car Is First Turned On
So I got my Gas Tank Fix done a couple weeks back, and ever since (at least that I can remember) whenever the car turns on I get this 1-2 second wiff of a paint smell kinda....like something was freshly painted, then it goes away almost instantly.
Do you think something happened to my car at the dealer and they covered it up? Seems weird though, you'd think you'd be able to smell the paint more often.
Golf/GTI VI :: Error Code 000136 - Fuel Rail / System Pressure Too High
So I've gotten this error code a few times now but never a CEL nor does the car drive any diff.
1 Fault Found:
000136 - Fuel Rail/System Pressure: Too High
P0088 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 1
[Code] ....
Golf V R32 :: Paint On The Spring Is Starting To Flake Off
I have a set of V Maxx's on my car for a couple of months...and i noticed that the red paint on the spring is starting to flake off...is there anything i could do to re-coat them or something? this happened on my patec coilovers on my MK IV.
View 8 RepliesGolf IV / Jetta IV :: Paint Begun Chipping Off
I've got some parts of the pain on my reflex silver wagon that have begun chipping off of the rear bumper near the edge. I'm assuming the PO was trying to lift something into the back and didn't quite make it high enough...a few times. Anyway, the surface underneath the paint is black, so I'm assuming it's plastic.
View 1 RepliesGolf IV / Jetta IV :: Fixing Rotted Paint
I bought my mk4 GTi about a year ago. The paint around the rear wheel well all the way down to the rocker started to bubble quickly and I can see now it's all rotted. Looks like someone covered it up for a quick sale as it all happened very quickly. Anyway, I'm now looking to repair this and want to make sure I take the best route. I linked some pictures. I've been told to cut it out, weld a patch panel, and epoxy primer then build with bondo and go through painting procedure.
[URL]