How to remove the rear side interior trim? I want to install a rear view camera. I need to pull the trim to run the wiring along the left side to the floor and to the front of the car.
My understanding is I need to get access to the left rear side of the hatch, then underneath the carpet along the rear door trim, etc. I've seen some posts on the 2 door, but there appear to be differences between that and the 4 door.
I have a 2010 4 door GTI. I'd like to install my daughter's front facing Britax child seat either in the rear right or rear central position. However, in either case, I'm finding that most of the rear weight ends up on the headrest and I would like to simply remove the headrest from that seating position.
I read in the user manual that to remove the headrest,I pull it to it's highest position and then push the button on the right side of the plastic entrance of the head rest into the seat, and 'simply' pull the headrest vertical out of the seat.
This is similar to how this was done in other cars I've owned. However it is not working for me with the GTI. Once I pull the headrest to the highest possible position I can get to, I press the button but the headrest simply refuses to come out. I've tried this on the other rear seat and same problem. With the middle rear seat I can't seem to pull the headrest out beyond its lowest position.
For a project I started, I need to remove the plastic cover from the inside of the hatch. I think many people did that to install a rear view camera. Looking for pictures, simple instructions set, or a reference to a repair manual that would clearly explain how to do that.
View 7 RepliesI'm trying to upgrade my speakers. I got the ones in the front and rear doors installed. I hoping there is a way I can access the speakers without having to completely remove all of the rear panels.
View 8 RepliesHow to remove the LED light from next to rear view camera? I know how to change the left side one but the one with the rear view camera looks hard to replace.
View 4 RepliesMy 2008 Elite has a door that won't open. The rear door on the driver's side.
It is an Australian Elite model. I can hear the click when the remote is pressed. How can I get the door open to remove the intyerior trim?
Bought my R32 in late July. So far I've just been lurking on the board, but today I have a question. I'm having difficulty removing the A-Pillar trim.
View 3 RepliesI am getting ready to install DVD headrest players in my RX400h. I am stumped on how to remove the read shield of the seat if that makes sence? I believe the are held in by clamps from middle to top but not sure what needs done at the bottome. And I can also feel two straps at the bottom.
How to remove the back so I can run the wires down the seat from the headrests? Pictures? Diagrams?
I searched but couldn't find any DIY on how to remove/install the haldex controller. Is it straight forward or any special tools needed? I know its very tight in there?
View 3 RepliesI have a 2011 Camry, and I would like to install a wired backup camera. What's the best way of running it from the license plate area to the center dash?
I would like to replace the original radio with a new radio that has a built-in display, so ideally the camera cable would end up somewhere behind the radio. And I would like the cable to not be visible, if possible.
This is the item I'm considering buying: [URL] ....
I took ownerhip of my R32 last week, there are a couple of things that I have noticed that I need to sort out.
1. There is a resonating sound at low speed from the rear boot trim, right where the rear windscreen wiper is, I can also make it happen when the boot is open by flicking the trim, is it loose, or what, is this a common problem..? Do I need to remove the trim and fix something...?
2. There is a black box under the driver seat with some electronics in it, I am dammned if I can get the lid to go back on properly, I have had a look and can't see any plastic Tabs broken, but it won't go back on properly, just keeps falling off...I have long legs so my seat is nearly as far back as it will go for me to drive, so this box is exposed, I need to get this on properly.
3. The cupholder thing down between the driver and passenger seat, there is a sliding lid on it, it is stuck half open (or closed..!?) and I can't get it open or closed, how th heck do I get at this to fix it...?
4. I will be looking what version Firmware the RNS 510 / MFD2 is, I am also looking for iphone integration, I have blue tooth for calls, and Sat Nav and the bigger display MFD....and would like to control the phone / tunes with the steering wheel, and see the track info in the MFD.
In my 6 day old Golf TSI, I'm noticing the rearview camera is quite noisy when it deploys and retracts. I don't recall how it sounded during test drives, but I'm surprised I can hear it at all, let alone as loudly as it seems.
Likely normal, but thought I'd post this up to see what others are experiencing. Might drop by the dealership and check another one out for comparison.
Picked up a mk6 tdi a couple weeks ago (my first vw), and yesterday my rear view camera started acting up. And by acting up I mean, the screen only displays black, and the camera is stuck open, protruding under the badge and will not close. I've checked to make sure everything is still plugged in, and it is. I'm not exactly sure what to try next?
View 3 RepliesLooking to wrap the dash trim the piece across the dash and the trim around the information display. Any tips? Also for the console.
View 3 RepliesI have recently upgraded the factory sync system in my 2011 f350 lariat to a factory sync with NAV. I am looking for tha way to redirect the fideo feed to the rear view mirror to the nav system, I have found the wire coors and pin locations for the radio end, just need the info if there is a way to move it in the a pillar harness on the passenger side to the radi harness.
Did ford really put 2 different harnesses in the cab if you had nav or not? Factory nav unit and factory camera (camera was in the vehicle to begin with). the radio side is pin 1 and 6 on the 10 pin radio harness.
I'm in process of changing my interior trim, had removed already all trim from dashboard etc. but can't figure out how remove trim around gear gaiter, trim with ESP and Autohold. Pulled really hard, nothing happens, don't want to break it.
View 1 RepliesThe tail light that is spliced into for the RVC flickers when the car is in reverse. I am thinking it is due to a voltage drop because of the camera pulling power.
View 8 RepliesI just got back from being gone awhile to find that my rear view camera has stopped working. I get a message that says "rear view camera system is currently unavailable" when I put the car in reverse.
The camera does come out like it should so I'm guessing it's something to do with wiring maybe a short or something. I have a 2014 RCD-510 with the camera input...
So i've been searching for ways to remove the bumper/door chrome trim to change to black but cannot find anything about the b5 or 5.5. What i'm trying to do is get the chrome to black but cannot figure out a safe way to remove them to either wrap in black vinyl, paint or just replace with black strips. I'm not trying to completely remove them just get the chrome to black. Its an 03
View 10 RepliesIs there a Trick to remove the A-pillar trim? I pulled all of the screws that I could find. Looking at the pic, there should be a screw near the rear of the Dash, but I am not seeing one there. It feels caught on something as I pry. I don't want to pry too hard to just have it crack/break.
I have pulled the black speaker panel at the front on the dash already. That was a pain to do with the windshield in the way.
Also, any tips on removing the trim around the sliding door window in the pic? Pulled all the screws and it still feels attached to something at the top.
How do you remove the trim on the steering wheel ? I want to wrap it with carbon fiber ...
View 2 Replies