Golf VI R :: Headlights Won't Oscillating After Installation Of Sport Springs?
Feb 25, 2014
'12 Golf R I really think it's just coincidence but want to ask before scheduling an appointment with the dealer.
I replaced the springs w/ VWR Sport Springs and upgraded brake rotors and pads last week. Didn't drive the car at night until last night, headlamps were all the way down and didn't move around corners like they had. Also, when turning the headlights on they don't oscillate (motion checks) like they should.
Also installed the Hella LED tail lights a few weeks ago but the headlamps worked as they should after that, at least until last night. Byte 18 = 21 (no fog), I do still have both L & R Back up light error.
Just curious if there's anything I should check before taking it to the dealer?
View 18 Replies
Advertisement
Looking to get a set of VWracing springs but wondering if there is a way to pull the front struts without having to pull the axles out?
View 24 Replies
I have a 2012 corolla le and I'm looking into getting TRD lowering springs as I don't want to go too low and they work with the stock strut, however; I read that they work best with the XRS' shock and strut (might be just the strut but I'm not sure), my question is what are the XRS' struts called and where would I find them, also from what year would the XRS' struts fit on my le?
View 3 Replies
I have a 2012 F350 CCLB with camper package (front coil springs @ 6,000 lbs). I was thinking of installing F550 coils springs, which are rated at 7,000 lbs, to provide greater lift up front.
Before performing this modification, what lift was achieved up front?
My endeavor is not to achieve level, per se, but rather allow for increased tire size, such as 35's and ground clearance.
View 9 Replies
I had no rattling before H&R sport spring install but now it's coming from what sounds like the top of the strut when I go over small bumps at slower speeds. All bushings and ball joints etc. are new . It's like a clunking banging noise?
View 2 Replies
Any link to a video on how to adjust the headlight height on a 2015 IS350 F-Sport?
View 4 Replies
I recently bought an 01 Excursion Limited 4wd 7.3L diesel. I have several projects I want to do so this. I would like to add the auto headlights Ive seen on other trucks.
View 14 Replies
I was wondering if the stock front R32 struts and springs will bolt on without any issues onto a 2.8L GTI.
View 2 Replies
If I get in my car to hard or even when I'm in the car and rock back and forth while standing still it sounds like the springs squeak, kind of like a spring bed when getting it on. I don't hear it when I'm driving though.
View 8 Replies
anyway to set it up so it always starts in S or S+ mode so I don't have to always remember to do it.
View 8 Replies
It's just the throttle response? Is steering or brakes enhanced or is it just me? I know the Is250 didn't get the suspension option like the IS350.
View 10 Replies
So I installed the DG springs today, and it should've been a simple install. Well once all was said and done I took it for a test drive. Every time I go over a bump I hear a loud clunking noise, like somethings loose. What it could be? I'm pretty sure I tightened everything.
View 10 Replies
Searched but all I see about "scraping" is from too low or tires scraping but this is a different issue, well i think it is, so my bro has golf 2.5 2 dr, he installed his DG Springs today and it makes this scraping noise, it comes and goes, it makes the same noise even if in straight pavement or not bouncing...
Here is a video of it making that noise, it starts at 0:50 secs : [URL] .....
View 1 Replies
I am experiencing a bad clunking noise when going over bumps. Its comming from the passenger rear and I am assuming the springs collapsed. How can i tell for sure? The car is sitting a little lower on the corner. Is it bad to drive the car with the spring in this condition?
View 8 Replies
My R's only got 5,400 miles on it and I just lowered it Saturday on H&R Springs and when I turn my steering wheel like 3/4 either way it makes like a clunk noise at lower speeds only....any other part besides strut top mounts and bearings? It sounds like its coming from the right front.
View 9 Replies
I am installing VWR Springs to replace worn stock components on my mk6 R. It appears that the previous owner slammed the car, and removed the "nipple" that holds the rear spring in place from the top. Both upper and lower spring isolators were present.
I am trying to find a name or part number for this unknown "nipple". I tried some combinations, such as "rear spring cap" and "rear spring centering guide". It looks like it would screw into the body, right above the springs themselves.
View 1 Replies
Someone hit my Prius 2015 while it was parked. Since being hit, I can hear an oscillating noise that gets fairly pronounced at 70+ mph. This noise is like: similar to a gradually increasing engine noise, as if there is a truck next to me that's trying to gradually out pace me or oscillating road noise. It's mild at 50 mph, but gets pretty pronounced at 70+ mph.
View 5 Replies
Last week , I changed the front wheels brake pads and had the mechanic rotating the wheels ( putting the front back and vise versa ). Ever since I had this oscillating noise and vibration when driving at 30-40 km/ hour (20-25 mph) when I speed up the noise change into a high roar without vibration . My prius is V gen 3 model 2010.
View 12 Replies
My 2006 sonata gls v6 has a whirring /oscillating sound in the front end that is getting the best of me . It is a whirring sound that increases in volume and level as I accelerate up through highway speed . When i go over a dip in the road the sound will oscillate .(change in volume)
Though the car is a 2006 with only 31,000 miles on it . I put it on jack stands and put the car in drive . The front left (drivers side cv axle has a minute wobble to it . If I hold the cv joint at the transmission tight and wiggle the tire I can detect a little play . ( maybe 1/8of an inch )The boots are intact so no grease is oozing out .
I have already changed both hub bearings in the front end and there is zero play in any of the suspension . The brake pads were replaced and the disc 's appear true (I filed of any rust on the edges )while I was into it ...
When i apply the brakes at highway speed I can feel a mild shudder in the wheel but not too bad . There is no clunking or clicking in turns nor is there any change in sound when turning the wheel while driving ....
The tires are Cooper cs4's that are a year old with no sign of abnormal wear. I rotated the tires to verify its not a tire issue. The auto transmission fluid level is normal. I am thinking about changing both cv axles. I am hoping its not an output bearing in the tranny.
View 4 Replies
My air con is not working, it started making an oscillating sound and not getting cold, which I think is the compressor. Garage couldn't find any leaks using a dye. So I asked my mechanic to change it. The generic part was a little over 300 but when he went to fit it it had the wrong number of mounting holes. Think he said it had three instead of the four from the original part? So he was not sure it was a suitable part, so didn't fit it. Because in the UK the CM model started selling in 2006 not 2007 it's possible he got confused and got a part for the older model? The car is definitely a CM!
View 4 Replies
When I looked at them a couple days ago I noticed that on the top of the original springs (I'd say first and maybe some of the second down) looked shiny and clean like it was making contact with the spiral above it. Could this be a warning sign of needing new springs or is this somewhat normal? The Car is a hair under 82k miles.
View 4 Replies